Tig Junkie Fabrication

14/08/2026

Testing out the new Diablo Carbide Hole Saw Set courtesy of diablotoolsanz
Good range of sizes in the kit. Carbide teeth for cutting a wide range of materials and handle up to 60mm cutting depth.
The Snap-Lock Plus system also makes changing hole saws and clearing plugs much faster and less painful.
The modular case leaves plenty of flexibility to add and arrange different sizes as needed.

29/10/2024

04/10/2024

While inspecting a customer's car for intercooler work, I noticed what looked like a crack in a recently installed downpipe.
On closer inspection, there were holes in the welds, unwelded seams, and no purge during welding.
Given the heat cycling a downpipe endures, this would likely have failed in a few months. I cleaned it up, added filler material, and purged it without needing to cut it apart, saving the customer extra costs.

03/10/2024

Custom stainless steel radiator lines.
Purged and TIG welded for smooth clean weld pe*******on free of oxides / sugaring.
Bead rolled ends.

02/10/2024

Custom 2-1 Stainless Exhaust System.
Getting the pipes to sweep into the collector at the same arc was a timely process but worth it for a smooth transition.
Retention springs and muffler mount hidden on the backside of the exhaust to keep things looking clean.

02/10/2024

Custom Aluminium louvre vents.

09/02/2024

https://www.instagram.com/reel/C3Eeh5gStc3/?igsh=aXpja2ppNmJyd2sy

04/02/2024

Aluminium outside corner joints. TIG welded W/5356