MPV Design

MPV Design Industrial Design Professional

Working to develop some new model making accessories and items for MPV Lumps n Bumps] Here the new Model Berth under dev...
17/02/2023

Working to develop some new model making accessories and items for MPV Lumps n Bumps]
Here the new Model Berth under development and being trialled before launch.

Model berths / stands are used by model makers to support their pieces whilst detailing and weathering or application of decals and hand painted effects. This stand introduces ease of use, quick adjustments, versatility and simple assembly.

Design: Marc Veenendaal
Prototype: MPV Design
Client: MPV Lumps n Bumps]

Concept helicopter rendering. 3D solids model developed in from 2D side view sketch drawn in . See previous post.Exerci...
25/10/2022

Concept helicopter rendering. 3D solids model developed in from 2D side view sketch drawn in . See previous post.

Exercise in realising and detailing a 2D concept and modelling in 3D.
Part of an ongoing series of concept designs in collaboration with

Concept helicopter sketch (lower image) prepared in app with 3D solids model developed in (upper image).Exercise in re...
25/10/2022

Concept helicopter sketch (lower image) prepared in app with 3D solids model developed in (upper image).

Exercise in realising and detailing a 2D concept and modelling in 3D.
Part of an ongoing series of concept designs in collaboration with

Some images of an air conditioning wall controller I designed for Actron Air some years back. All before touchscreens be...
01/07/2019

Some images of an air conditioning wall controller I designed for Actron Air some years back. All before touchscreens became the rage and inexpensive to implement.
I worked on the design, styling, enclosure detailing and files for manufacture.

Here is a product I recently developed for a client of mine - the Q-Pack - visit .www.qachef.comThe product was a challe...
26/05/2019

Here is a product I recently developed for a client of mine - the Q-Pack - visit .
www.qachef.com
The product was a challenge as it is a small volume product to be used by large scale catering services for digitising food safety compliance processes.
The project involved concept design and product packaging around supplied electronics components and hardware to a tight project budget.
Being a low volume product, injection moulding was not a viable production method. Instead I opted for professionally and accurate 3D printed Selective Laser Sintered Nylon components sleeved in a high performance silicone over-mould. The silicone provides a hygienic cover, moisture resistance, slip resistance and bump protection.
Machined acetal screen shroud and swing out temperature plunge probe offer a rigid and durable material for high wear items.

Address

12, 12-14 Northumberland Road
Caringbah, NSW
2229

Telephone

+61295251007

Website

Alerts

Be the first to know and let us send you an email when MPV Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category