Hawkeye CAD & Design

20/08/2026

Great new design.

*** RME ULTIMATE AG ROADKING 4300***

* 14ft CUTTING
* LARGE CAPACITY 1100 HIGH BUCKET
* 2X INTEGRATED REAR TANKS FOR INCREASED WEIGHT OVER BLADE
* HEAVY DUTY PIVOT BEARINGS FOR LONGEVITY AND EASE OF SERVICEABILITY
* HEIGHT INDICATOR
* HEAVY DUTY FULLY FABRICATED WALKING BEAMS
* HEAVY DUTY 65MM AXELS AND LANDCRUISER HUBS
* LANDCRUISER SUNRAISER WHEELS
* REMOVEABLE DRAW BAR AND REAR ASSEMBLY
* 16MM HEAVY DUTY BUCKET
* 16MM 450 BIZ SKIDS
* QUALITY SOUTHCOTT HYDRAULICS

12/07/2026

Did a little axe handle job for Gerald Youles a few weeks back and was able to fit his handle to the new axe i designed.

Like a glove as they say.

12/07/2026

I've been working on the guts and workings of a new factory for a client. I can't show any detail but here's an exciting look at a big pit!

I'm modeling the thousands of things that will go in it.

21/05/2026

25/03/2026

Grain Cleaner

25/03/2026

25/03/2026

Tipping Trough

19/03/2026

𝙏𝙃𝙀 𝙙𝙚𝙨𝙞𝙜𝙣 𝙗𝙚𝙝𝙞𝙣𝙙 𝙏𝙃𝙀 𝘿𝙧𝙖𝙜 𝘽𝙪𝙘𝙠𝙚𝙩

You might remember the MASON Engineering Drag Bucket we shared previously. 𝙏𝙝𝙞𝙨 𝙩𝙞𝙢𝙚, 𝙬𝙚’𝙧𝙚 𝙨𝙝𝙤𝙬𝙞𝙣𝙜 𝙖 𝙗𝙞𝙩 𝙢𝙤𝙧𝙚 𝙤𝙛 𝙩𝙝𝙚 𝙙𝙚𝙨𝙞𝙜𝙣 𝙗𝙚𝙝𝙞𝙣𝙙 𝙞𝙩.

Ryan’s concept was a drag bucket - basically a cross between a scraper bucket and a grader blade.

If you haven’t seen one before, they’re commonly used for road works and site levelling, particularly on farms and properties.
They help shape the road surface, create the proper camber so water runs off, and move material from high spots into low spots.

𝙈𝙮 𝙧𝙤𝙡𝙚 𝙞𝙣 𝙩𝙝𝙞𝙨 𝙟𝙤𝙗 𝙬𝙖𝙨 𝙩𝙖𝙠𝙞𝙣𝙜 𝙍𝙮𝙖𝙣’𝙨 𝙘𝙤𝙣𝙘𝙚𝙥𝙩 𝙖𝙣𝙙 𝙩𝙪𝙧𝙣𝙞𝙣𝙜 𝙞𝙩 𝙞𝙣𝙩𝙤 𝙖 𝙛𝙪𝙡𝙡 𝘾𝘼𝘿 𝙙𝙚𝙨𝙞𝙜𝙣 - something that could be built consistently while keeping the practicality of what he’d already created.

Sometimes the design side of a job shows more of the thinking behind it than the finished photo does.

If you're after a Drag Bucket, have a chat with the team at Ryan Mason Engineering: https://www.ryanmasonengineering.com.au/

𝘼𝙣𝙙 𝙞𝙛 𝙮𝙤𝙪’𝙫𝙚 𝙜𝙤𝙩 𝙖𝙣 𝙞𝙙𝙚𝙖 𝙤𝙛 𝙮𝙤𝙪𝙧 𝙤𝙬𝙣 𝙩𝙝𝙖𝙩 𝙣𝙚𝙚𝙙𝙨 𝙩𝙪𝙧𝙣𝙞𝙣𝙜 𝙞𝙣𝙩𝙤 𝙨𝙤𝙢𝙚𝙩𝙝𝙞𝙣𝙜 𝙮𝙤𝙪 𝙘𝙖𝙣 𝙗𝙪𝙞𝙡𝙙, 𝙩𝙚𝙨𝙩, 𝙤𝙧 𝙧𝙚𝙛𝙞𝙣𝙚, 𝙛𝙚𝙚𝙡 𝙛𝙧𝙚𝙚 𝙩𝙤 𝙜𝙞𝙫𝙚 𝙢𝙚 (𝙅𝙖𝙢𝙞𝙚) 𝙖 𝙘𝙖𝙡𝙡.
📞 0473 842 439

18/03/2026

𝗪𝗵𝗮𝘁 𝗱𝗼 𝘆𝗼𝘂 𝗱𝗼 𝘄𝗵𝗲𝗻 𝘁𝗵𝗲 𝘄𝗼𝗿𝗸𝘀𝗵𝗼𝗽 𝗷𝗼𝗯𝘀 𝘀𝘁𝗮𝗿𝘁 𝗴𝗲𝘁𝘁𝗶𝗻𝗴 𝗯𝗶𝗴𝗴𝗲𝗿?

There’s usually a point where workshops start getting asked about bigger work.
Council jobs.
Commercial builders.
Larger operators.
𝗔𝗻𝗱 𝘁𝗵𝗼𝘀𝗲 𝗯𝗶𝗴𝗴𝗲𝗿 𝗼𝗽𝗲𝗿𝗮𝘁𝗼𝗿𝘀 𝘂𝘀𝘂𝗮𝗹𝗹𝘆 𝗵𝗮𝘃𝗲 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱𝘀 𝗮𝗻𝗱 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀 𝘁𝗼 𝗺𝗲𝗲𝘁.

Sometimes it’s tenders, sometimes it’s project documentation or approval processes.
𝗔 𝗯𝗶𝗴 𝗽𝗮𝗿𝘁 𝗼𝗳 𝘁𝗵𝗮𝘁 𝗶𝘀 𝗽𝗿𝗼𝗽𝗲𝗿 𝗱𝗼𝗰𝘂𝗺𝗲𝗻𝘁𝗮𝘁𝗶𝗼𝗻.
Not a hand sketch.
Not “we’ve built plenty of these.”

𝗔𝗰𝘁𝘂𝗮𝗹 𝗖𝗔𝗗 𝗱𝗿𝗮𝘄𝗶𝗻𝗴𝘀 𝘁𝗵𝗮𝘁 𝗰𝗮𝗻 𝗯𝗲 𝗿𝗲𝘃𝗶𝗲𝘄𝗲𝗱, 𝗮𝗽𝗽𝗿𝗼𝘃𝗲𝗱, 𝗮𝗻𝗱 𝘂𝘀𝗲𝗱 𝗮𝗴𝗮𝗶𝗻 𝗹𝗮𝘁𝗲𝗿 𝗶𝗳 𝗻𝗲𝗲𝗱𝗲𝗱.

Because once projects get bigger, more people are involved - engineers, builders, councils, and project managers.
And they all need something clear to work from.
That’s where proper CAD drawings start to matter.

𝗜𝗳 𝗯𝗶𝗴𝗴𝗲𝗿 𝗷𝗼𝗯𝘀 𝗮𝗿𝗲 𝘀𝘁𝗮𝗿𝘁𝗶𝗻𝗴 𝘁𝗼 𝗰𝗼𝗺𝗲 𝘆𝗼𝘂𝗿 𝘄𝗮𝘆 𝗮𝗻𝗱 𝘆𝗼𝘂 𝗻𝗲𝗲𝗱 𝗱𝗿𝗮𝘄𝗶𝗻𝗴𝘀 𝘀𝗼𝗿𝘁𝗲𝗱, 𝗜 𝗰𝗮𝗻 𝗵𝗲𝗹𝗽.

𝗝𝗮𝗺𝗶𝗲 𝟬𝟰𝟳𝟯 𝟴𝟰𝟮 𝟰𝟯𝟵

𝗪𝗲 𝘁𝗼𝘂𝗰𝗵𝗲𝗱 𝗼𝗻 𝘁𝗵𝗶𝘀 (𝗮𝗻𝗱 𝗺𝘂𝗰𝗵 𝗺𝗼𝗿𝗲) 𝗶𝗻 𝗼𝘂𝗿 𝗠𝗮𝗿𝗰𝗵 𝗯𝗹𝗼𝗴:
https://hawkeyecad.com.au/you-dont-need-a-full-time-designerbut-you-do-need-proper-drawings/

There’s a stage most growing workshops hit.

12/03/2026

𝗢𝗻𝗲 𝗼𝗳 𝘁𝗵𝗲 𝗠𝗼𝗿𝗲 𝗨𝗻𝘂𝘀𝘂𝗮𝗹 𝗖𝗔𝗗 𝗝𝗼𝗯𝘀 𝗜’𝘃𝗲 𝗛𝗮𝗱 𝗖𝗼𝗺𝗲 𝗧𝗵𝗿𝗼𝘂𝗴𝗵…

𝗚𝗲𝗿𝗮𝗹𝗱 𝗬𝗼𝘂𝗹𝗲 is a 𝘄𝗼𝗿𝗹𝗱 𝗰𝗵𝗮𝗺𝗽𝗶𝗼𝗻 𝗮𝘅𝗲𝗺𝗮𝗻 and former 𝗔𝘂𝘀𝘁𝗿𝗮𝗹𝗶𝗮𝗻 𝗦𝘂𝗿𝘃𝗶𝘃𝗼𝗿 contestant. He’s also competed in the 𝗦𝗧𝗜𝗛𝗟 𝗧𝗜𝗠𝗕𝗘𝗥𝗦𝗣𝗢𝗥𝗧𝗦 series, where competitors run what’s known as a “Hot Saw.”

𝗔𝗻𝗱 𝘄𝗵𝗲𝗻 𝘄𝗲 𝘀𝗮𝘆 𝗵𝗼𝘁 𝘀𝗮𝘄… 𝘄𝗲 𝗺𝗲𝗮𝗻 𝗶𝘁.
These are heavily modified, extremely powerful competition chainsaws built purely for cutting events.

Gerald got in touch needing a plate for the side of the saw drawn up in CAD.
The plate will be machined from a solid block of aluminium, and because these saws get pushed pretty hard in competition, parts like this take a fair bit of punishment.

𝗧𝗵𝗲𝘆 𝗴𝗲𝘁 𝗸𝗻𝗼𝗰𝗸𝗲𝗱 𝗮𝗿𝗼𝘂𝗻𝗱 𝗮𝗻𝗱 𝗿𝗲𝗽𝗹𝗮𝗰𝗲𝗱 𝗽𝗲𝗿𝗶𝗼𝗱𝗶𝗰𝗮𝗹𝗹𝘆, 𝘀𝗼 𝗶𝘁’𝘀 𝗶𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝘁𝗼 𝗵𝗮𝘃𝗲 𝗮 𝗰𝗼𝘂𝗽𝗹𝗲 𝗼𝗳 𝘀𝗽𝗮𝗿𝗲𝘀 𝗿𝗲𝗮𝗱𝘆 𝗼𝗻 𝘁𝗵𝗲 𝘀𝗵𝗲𝗹𝗳.

𝗧𝗵𝗮𝘁’𝘀 𝘄𝗵𝗲𝗿𝗲 𝗽𝗿𝗼𝗽𝗲𝗿 𝗱𝗿𝗮𝘄𝗶𝗻𝗴𝘀 𝗰𝗼𝗺𝗲 𝗶𝗻.
With a clear CAD drawing, the part can be machined again anytime and still fit perfectly.
That repeatability is one of the biggest advantages of good CAD work.

No guessing.
No measuring the old one again.
No hoping everything lines up.

𝗜𝘁’𝘀 𝗮 𝗴𝗼𝗼𝗱 𝗲𝘅𝗮𝗺𝗽𝗹𝗲 𝗼𝗳 𝗵𝗼𝘄 𝗖𝗔𝗗 𝗱𝗿𝗮𝘄𝗶𝗻𝗴𝘀 𝗮𝗽𝗽𝗹𝘆 𝘁𝗼 𝗮𝗹𝗹 𝘀𝗼𝗿𝘁𝘀 𝗼𝗳 𝗷𝗼𝗯 - from full machines and assemblies right down to a single component like a saw plate.
Efficiency often starts in the drawings.

𝗛𝗮𝘃𝗲 𝘀𝗼𝗺𝗲 𝘄𝗼𝗿𝗸𝘀𝗵𝗼𝗽 𝗷𝗼𝗯𝘀 𝗼𝗿 𝗽𝗮𝗿𝘁𝘀 𝘆𝗼𝘂’𝗱 𝗹𝗶𝗸𝗲 𝘁𝗼 𝘁𝗮𝗹𝗸 𝘁𝗵𝗿𝗼𝘂𝗴𝗵?
Jamie
0473 842 439
[email protected]