Shenzhen Longguan Thermo - Forming Technology Co., Ltd

Website

Shenzhen Longguan Thermo - Forming Technology Co., Ltd Shenzhen LongGuan Thermoforming Technology Co., Ltd.

specializes in precision thermoforming moulds, with expertise in positive/negative pressure processes and structural design, based in Shenzhen with a Nantong branch.

🍔 MFPP Clamshell Burger Box | Thermoforming MoldAnother thermoforming mold project is ready for food packaging productio...
05/10/2026

🍔 MFPP Clamshell Burger Box | Thermoforming Mold

Another thermoforming mold project is ready for food packaging production. The mold is developed for an MFPP clamshell burger box and designed to run on an ILLIG RDM 75 machine. For hinged food containers, consistent forming is only part of the requirement—the hinge, edge definition and lid-to-base fit also need to perform reliably throughout production. 🔧

At Shenzhen Longguan Thermo - Forming Technology Co., Ltd., we develop thermoforming molds around the material, product structure and machine requirements. For burger and takeaway packaging, accurate forming of the hinge and closing structure helps ensure the finished container works properly from production to actual use. Developing a customized food packaging mold? Contact LongGuan to discuss your project.

🌐 longguantfmoulds.com
📧 [email protected]

29/09/2026

🥣 From Prototype Testing to Production-Ready Tooling

A new PP bowl lid sample trial has been completed at Shenzhen Longguan Thermo - Forming Technology Co., Ltd. Before moving into a production mold, prototype trials allow us to check the actual product shape, forming quality, fitting performance and other details under thermoforming conditions. 🔧

For this project, the sample mold was used to verify the PP bowl lid design and identify any adjustments needed before developing the final tooling. This early testing step can help reduce unnecessary changes during production mold development and provide a clearer basis for the next stage. Developing a new thermoformed product? Contact LongGuan to discuss your prototype or production mold requirements.

🌐 longguantfmoulds.com
📧 [email protected]

25/09/2026

🌱 Prototype Mold Trial | Exploring Corn Starch-Based Thermoforming

Not every thermoforming project starts with a production mold. This time, Shenzhen Longguan Thermo - Forming Technology Co., Ltd. developed a prototype mold to test a corn starch-based material. Compared with conventional PP or PET, different material formulations can behave differently during heating, forming and demolding, so early-stage mold trials are useful for evaluating the actual forming process. 🔧

The sample trial focuses on material forming behavior, product geometry and demolding performance before moving toward full-scale tooling. This approach can help identify mold and process adjustments earlier in product development. Interested in testing alternative materials or developing a new thermoformed product? Contact LongGuan to discuss your project.

🌐 longguantfmoulds.com
📧 [email protected]

🚀 35 Cycles/Min | Oval PP Tray Thermoforming MoldAnother thermoforming mold project has been developed for our customer ...
24/09/2026

🚀 35 Cycles/Min | Oval PP Tray Thermoforming Mold

Another thermoforming mold project has been developed for our customer in India. 🇮🇳 This oval PP tray mold features a 1×6 layout and is designed for a HOLIN thermoforming machine with a 700 × 600 mm forming area. Using pure PP material, the tooling is built for production speeds of up to 35 cycles/min, with consistent forming across all six cavities.

🔧 At this speed, six cavities can theoretically produce up to 12,600 trays per hour, before accounting for downtime and rejects. For high-output thermoforming, matching the mold layout to the machine and maintaining cavity-to-cavity consistency are key to keeping production stable. Shenzhen Longguan Thermo - Forming Technology Co., Ltd. develops customized thermoforming molds based on product, material and machine requirements. Have a PP tray project to develop? Contact us to discuss your tooling needs.

🌐 longguantfmoulds.com
📧 [email protected]

🥩📦 30 Cycles/Min | MAP Tray Thermoforming MoldFrom precision tooling to fresh food packaging on supermarket shelves. Thi...
23/09/2026

🥩📦 30 Cycles/Min | MAP Tray Thermoforming Mold

From precision tooling to fresh food packaging on supermarket shelves. This MAP tray mold was developed for a customer in Suzhou, China, using MFPP material and designed for the KIEFEL KMD64 thermoforming machine. With production speeds of up to 30 cycles/min, stable forming and consistent tray dimensions are essential for high-volume packaging.

🔧 For MAP trays, the sealing fl**ge is also a key part of the mold design. Consistent fl**ge dimensions and clean forming help support reliable downstream sealing, especially for fresh meat and other perishable food packaging. At Shenzhen Longguan Thermo - Forming Technology Co., Ltd., we develop thermoforming molds around the actual machine, material and packaging requirements. Have a MAP or fresh food packaging project? Contact us to discuss your tooling needs.

🌐 longguantfmoulds.com
📧 [email protected]

☕️ 30-Cavity PP Coffee Cup Lid Mold | Project CompletedAnother PP lid project has been successfully completed for a cust...
19/09/2026

☕️ 30-Cavity PP Coffee Cup Lid Mold | Project Completed

Another PP lid project has been successfully completed for a customer in China. 🇨🇳 This four-station thermoforming mold features a 1×30 layout and is matched to a 670 × 480 mm forming area, using 0.38 mm pure PP sheet. With 30 cavities produced per cycle, stable forming, precise cutting and consistent cavity performance are essential for reliable lid fitting and appearance.

🔧 For high-cavity cup lid production, mold design needs to balance output with consistency. At Shenzhen Longguan Thermo - Forming Technology Co., Ltd., we develop customized thermoforming molds around the product, material and machine requirements, with trial testing to verify performance before shipment. Looking for a customized PP lid mold? Contact LongGuan for your project.

🌐 longguantfmoulds.com
📧 [email protected]

🇮🇳 PP Multi-Compartment Meal Tray | Mold Trial CompletedAnother thermoforming mold trial has been completed for an India...
18/09/2026

🇮🇳 PP Multi-Compartment Meal Tray | Mold Trial Completed

Another thermoforming mold trial has been completed for an India project. The customized mold is designed for a 700 × 600 mm forming area and uses 0.45 mm pure PP sheet. For multi-compartment trays, stable material distribution and clear forming of each compartment are important to maintain tray strength, dimensions and overall consistency. 🍱

🔧 At Shenzhen Longguan Thermo - Forming Technology Co., Ltd., we test customized thermoforming molds under actual machine conditions whenever possible, checking forming performance before shipment. Need a PP meal tray mold matched to your machine and production requirements? Contact LongGuan to discuss your project.

🌐 longguantfmoulds.com
📧 [email protected]

☕️ 30-Cavity PP Coffee Cup Lid Mold | Trial CompletedAnother PP lid project has been successfully completed for a custom...
15/09/2026

☕️ 30-Cavity PP Coffee Cup Lid Mold | Trial Completed

Another PP lid project has been successfully completed for a customer in China. 🇨🇳 The four-station thermoforming mold features a 1×30 layout and is matched to a 670 × 480 mm forming area, using just 0.38 mm pure PP sheet. With 30 cavities running in each cycle, stable forming, accurate cutting and cavity-to-cavity consistency are essential for reliable cup lid fitting and appearance.

🔧 At Shenzhen Longguan Thermo - Forming Technology Co., Ltd., we test molds under actual machine conditions whenever possible, helping verify forming quality and production stability before shipment. Looking for a customized high-cavity PP lid mold for your production line? Contact us to discuss your requirements.

🌐 longguantfmoulds.com
📧 [email protected]

10/09/2026

⚙️ PP Multi-Compartment Meal Tray | Mold Trial in India 🇮🇳

Another thermoforming mold trial has been completed for our Indian customer. This mold is designed for a 700 × 600 mm forming area and uses 0.45 mm pure PP sheet. With such thin material, stable material distribution and clear forming of each compartment are especially important for maintaining tray strength and product consistency.

🔧 At Shenzhen Longguan Thermo - Forming Technology Co., Ltd., we verify molds under real machine conditions whenever possible, checking forming quality and cavity consistency before shipment. Need a customized PP meal tray mold for your production line? Contact LongGuan to discuss your project.

🌐 longguantfmoulds.com
📧 [email protected]

⚙️ 28 Cavities in One Cycle | Built for Consistent ProductionThis 1×28 three-station thermoforming mold is designed for ...
07/09/2026

⚙️ 28 Cavities in One Cycle | Built for Consistent Production

This 1×28 three-station thermoforming mold is designed for pure PP potato chip trays, using approx. 0.5 mm PP sheet and an 820 × 650 mm forming area. With 28 cavities running simultaneously, precise forming control is essential to keep tray shape, appearance and stacking performance consistent.

🔧 At Shenzhen Longguan Thermo - Forming Technology Co., Ltd., we focus on high-cavity tooling that balances production efficiency with cavity-to-cavity consistency. Need a customized PP tray mold for your production line? Contact LongGuan to discuss your project.

🌐 longguantfmoulds.com
📧 [email protected]

Address

Building C, 1st Floor, CIMC Valley Industrial Park, Bao’an District
Shenzhen

Website

Alerts

Be the first to know and let us send you an email when Shenzhen Longguan Thermo - Forming Technology Co., Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category