Elec-WAS

07/04/2018

09/03/2018

Surge Protection Devices (SPD) are used for electric power supply networks, telephone networks, and communication and automatic control buses.

02/03/2018

Voltage Surge

The over voltage stresses applied upon the power system, are generally transient in nature. Transient voltage or voltage surge is defined as sudden sizing of voltage to a high peak in very short duration.
The voltage surges are transient in nature, that means they exist for very short duration. The main cause of these voltage surges in power system are due to lightning impulses and switching impulses of the system. But over voltage in the power system may also be caused by, insulation failure, arcing ground and resonance etc.
The voltage surges appear in the electrical power system due to switching surge, insulation failure, arcing ground and resonance are not very large in magnitude. These over voltages hardly cross the twice of the normal voltage level. Generally, proper insulation to the different equipment of power system is sufficient to prevent any damage due to these over voltages. But over voltages occur in the power system due to lightning is very high. If over voltage protection is not provided to the power system, there may be high chance of severe damage. Hence all over voltage protection devices used in power system mainly due to lightning surges.

21/02/2018

R&D Engineering Research and development (R&D) refers to the investigative activities a business conducts to improve existing products and procedures or to lead to the development of new products and procedures.

13/02/2018

Dear all
pleas like this page and share it in all your groups and your friends
Thanks to all