Fison Instruments Ltd

Website

Fison Instruments Ltd Fison | Certified Medical Equipment
Supplying trusted, high-quality medical instruments for diagnosis, surgery & care. FDA, CE & ISO certified.

Expert support, competitive prices. Elevate patient care with us!

Scanning Electron Microscope FM-SEM-A100Image surfaces at the nanoscale with the FM-SEM-A100. This scanning electron mic...
16/10/2026

Scanning Electron Microscope FM-SEM-A100

Image surfaces at the nanoscale with the FM-SEM-A100. This scanning electron microscope covers magnification from 1x to 2,500,000x, with resolution of 1.0 nm at 15 kV (SE), 1.5 nm at 1 kV (SE), and 0.8 nm at 30 kV (STEM), running on a voltage range of 20 V to 30 kV. A Schottky field emission electron gun, electromagnetic composite objective, and fully automatic oil-free vacuum system (sample room pressure

Coulometric Karl Fischer Titrator FM-AKT-A100Measure moisture content with the FM-AKT-A100. This coulometric Karl Fische...
15/10/2026

Coulometric Karl Fischer Titrator FM-AKT-A100

Measure moisture content with the FM-AKT-A100. This coulometric Karl Fischer titrator covers a moisture range of 1 ppm to 100%, with a measurement range of 0.01 μg to 200 mg and a maximum electrolysis speed of 40 μg/s. Endpoint detection runs on an alternating current polarization method with a twin platinum electrode, displayed on a 7-inch color touch LCD with results in μg, mg/L, ppm, or %. Automatic drift compensation, open and short-circuit fault detection, unlimited data storage, and a built-in high-speed thermal printer support routine testing, built to ASTM D1533 and ASTM D6304 standards. Comes standard with a full electrolytic cell setup, electrodes, sample filling devices, drying tube, electrolyte, and related consumables. Suited for assessing water content in petroleum and petrochemical products, oils, gasolines, solvents, pharmaceuticals, and cosmetics.

https://www.fison.com

Learn more: https://www.fison.com/coulometric-karl-fischer-titrator/fm-akt-a100

Lyophilizer Freeze Dryer FM-FD-A100Stabilize sensitive materials with the FM-FD-A100. This freeze dryer handles a 3L sam...
14/10/2026

Lyophilizer Freeze Dryer FM-FD-A100

Stabilize sensitive materials with the FM-FD-A100. This freeze dryer handles a 3L sample capacity across 0.3 m² of drying area, with a cold trap reaching ≤-75°C (26L capacity) and a temperature range of -50°C to 70°C, holding fluctuation to within ±1°C. The chamber fits 3 trays across 4 shelves, with vial capacity ranging from 654 pieces (Φ22mm) up to 2187 pieces (Φ12mm) and a vacuum flow rate of 6 L/S (22 m³/h). Stainless steel construction, an interlock mechanism, electrical defrosting, a silicone heating oil rod, automatic stoppering, and adjustable chamber vacuum control support routine operation, with a digital display for setting and viewing parameters. A valve port is available as an optional accessory. Suited for stabilization of food, biological materials, and pharmaceuticals, including proteins, vaccines, bacteria, and mammalian cells.

https://www.fison.com

Learn more: https://www.fison.com/lyophilizer-freeze-dryer/fm-fd-a100

Vertical Autoclave FM-VA-B206Sterilize a wide range of lab materials with the FM-VA-B206. This vertical autoclave offers...
13/10/2026

Vertical Autoclave FM-VA-B206

Sterilize a wide range of lab materials with the FM-VA-B206. This vertical autoclave offers a 50L chamber capacity, a working temperature of 134°C with heat average control within ±1°C, a working pressure of 0.22 MPa (max 0.23 MPa), and a timer range of 0 to 99 minutes or up to 9 hours 59 minutes. An LCD display, quick-open door mechanism, manual exhaust valve, anti-corrosion coating, adjustable shelving, and an ergonomic handle support a compact, energy-efficient design built for daily use. Suited for sterilizing medical instruments, microbiological media, glassware, surgical tools, and laboratory waste across hospitals, research labs, pharmaceutical units, and educational institutions.

https://www.fison.com

Learn more: https://www.fison.com/vertical-autoclave/fm-va-b206

Liquid Particle Counter FM-LPC-A100Detect particulate contamination with the FM-LPC-A100. This particle counter covers a...
12/10/2026

Liquid Particle Counter FM-LPC-A100

Detect particulate contamination with the FM-LPC-A100. This particle counter covers a test range of 1 to 500 μm with customizable full channel settings (≥5, 8, 10, 12, 25, 100 μm) and dedicated pharmacopoeia (≥10, 25 μm) and drug packaging material channels (≥5, 10, 25 μm). It counts up to 9,999,999 particles with detection concentration up to 10,000 particles/ml, RSD ≤2%, channel resolution ≥95% at the 10 μm channel, and accuracy within ±5% of specified value. Sampling runs 5 ml in under 10 seconds or 100 ml in under 3 minutes, with an imported laser, replaceable injection system, built-in dot-matrix printer, data analysis and statistical software, and three-level password management. Suited for detecting particulate contamination in injections, sterile powders, and small-volume parenteral drugs, and for verifying filtration systems across pharmaceutical, medical device, and packaging material industries.

https://www.fison.com

Learn more: https://www.fison.com/liquid-particle-counter/fm-lpc-a100

Automatic Potentiometric Titrator FM-APT-A200Handle routine titration work with the FM-APT-A200. This titrator covers a ...
10/10/2026

Automatic Potentiometric Titrator FM-APT-A200

Handle routine titration work with the FM-APT-A200. This titrator covers a pH range of 0.00 to 14.00 pH (accuracy ±0.01 pH) and an mV range of -1800.0 to 1800.0 mV (accuracy ±0.03% FS), with a temperature span of -5.0°C to 105.0°C (accuracy ±0.3°C). Four titration modes — DET, MET, SET, and MAT — run through replaceable 10 ml and 20 ml burettes, with a large LCD display for methods, curves, and results, USB connectivity, and storage for 50 data sets. Power-off protection keeps data safe, and it ships with a full electrode set (reference, platinum, silver, and pH glass electrodes), temperature probe, stirring bars, solution bottles, and connecting accessories. Suited for pharmaceuticals, environmental testing, food and beverage, and chemical manufacturing applications.

https://www.fison.com

Learn more: https://www.fison.com/automatic-potentiometric-titrator/fm-apt-a200

Fluorescence Immunoassay Analyzer FM-IHA-A100Run hormone and biomarker testing with the FM-IHA-A100. This fluorescence i...
09/10/2026

Fluorescence Immunoassay Analyzer FM-IHA-A100

Run hormone and biomarker testing with the FM-IHA-A100. This fluorescence immunoassay analyzer processes over 200 tests per hour across 16 channels, with a 15-minute analysis time, an LCD touch screen, and LIS connectivity via COM/USB. An internal thermal printer, low sample volume requirements, and built-in quality control support consistent test monitoring, with software-driven data interpretation keeping result analysis straightforward. Optional test cassettes cover cancer markers (AFP, CEA, PSA, PG I/II, FOB), cardiac markers (cTnI, CK-MB, myoglobin, NT-proBNP, H-FABP, D-dimer), inflammation and infection markers (IL-6, CRP, PCT, SAA, SARS-CoV-2 neutralizing antibody), kidney and metabolic markers (CysC, β2-microglobulin, NGAL, microalbumin, HbA1c), thyroid and hormone panels (T3, T4, TSH, FT3, FT4), and Vitamin D. Suited for testing related to thyroid dysfunction, diabetes, cancer, adrenal disorders, and reproductive health conditions.

[email protected]

Learn more: https://www.fison.com/fluorescence-immunoassay-analyzer/fm-iha-a100

CHN Elemental Analyzer FM-CHN-A100Run high-throughput carbon, hydrogen, and nitrogen analysis with the FM-CHN-A100. This...
08/10/2026

CHN Elemental Analyzer FM-CHN-A100

Run high-throughput carbon, hydrogen, and nitrogen analysis with the FM-CHN-A100. This analyzer completes analysis in 300 seconds per sample, covering detection ranges of 0.005 to 100% carbon, 0.05 to 25% hydrogen, and 0.01 to 50% nitrogen, with repeatability of ≤0.5% (C), ≤0.15% (H), and ≤0.08% (N). A layered auto-feeder holds up to 140 samples across 4 levels, paired with a resistance furnace heating up to 1050°C at ±1°C precision. Fixed combustion settings, rapid sample introduction, a high-stability infrared detection system, and remote monitoring support low-maintenance routine operation, and it complies with ASTM D5373-2014 testing requirements. Suited for elemental composition analysis across environmental testing, petroleum, coal, chemical, pharmaceutical, agricultural, and food and beverage sectors.

[email protected]

Learn more: https://www.fison.com/chn-elemental-analyzer/fm-chn-a100

Vertical Autoclave FM-VA-B201Sterilize with confidence using the FM-VA-B201. This vertical autoclave offers a 50L chambe...
07/10/2026

Vertical Autoclave FM-VA-B201

Sterilize with confidence using the FM-VA-B201. This vertical autoclave offers a 50L chamber capacity, running a sterilization temperature of 134°C across a working range of 105°C to 134°C, with a working pressure of 0.22 MPa and heat average control within ±1°C. A full stainless steel body, handwheel quick-opening door with safety lock, and digital LCD touch keypad pair with automatic steam discharge, a self-inflating seal design, four mobility casters, and over-temperature and over-pressure auto-protection. A drying function system and water shortage shutoff round out routine operation, and it ships standard with 2 stainless steel sterilizing baskets. Suited for laboratory sterilization of glassware, biological materials, and culture media across medicine, biotechnology, and pharmaceutical industries.
[email protected]

Learn more: https://www.fison.com/vertical-autoclave/fm-va-b201

Portable Oil Particle Counter FM-POC-A101Monitor oil cleanliness on site with the FM-POC-A101. This particle counter cov...
06/10/2026

Portable Oil Particle Counter FM-POC-A101

Monitor oil cleanliness on site with the FM-POC-A101. This particle counter covers a size range of 1μm to 600μm across 8 detection channels, with a detection speed of 5 to 35 ml/min and sampling volume accuracy of ±3% (10ml sample volume). Offline testing handles viscosity up to 100cSt (400cSt at the highest), while online testing runs at 0.1 to 0.6Mpa (up to 40Mpa at the highest), with a sample temperature range of 0°C to 80°C. A semiconductor laser light source, integrated pressure relief devices, and a built-in thermal printer support routine field use, rated for working temperatures from -20°C to 60°C and powered by 100V to 265VAC. Comes standard with the main unit, 24V power adapter, reagent bottles, inlet/outlet pipes, a lithium battery with charger, cleaning rod, seal rings, thermal paper, and documentation. Suited for industrial maintenance, hydraulic systems, lubrication oil analysis, and fuel oil quality control field testing.

[email protected]

Learn more: https://www.fison.com/portable-oil-particle-counter/fm-poc-a101

Address

Fison Instruments Ltd. 272 Bath Street
Glasgow
G24JR

Website

Alerts

Be the first to know and let us send you an email when Fison Instruments Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Sponsored

Share

Category