08/09/2023
How to install 1st fix for kitchen hot, cold, waste, washing machine, dish washer and gas cooker
The builders has ripped off the kitchen and called me to come and do the plumbing 1st fix
Materials required:
15mm Cooper pipe
15mm elbows
15mm tee
15mm washing machine and dish washer valve
15mm cap end
15mm clips
15mm stopcock
40mm waste pipe
40mm clips
40mm elbows
40mm commpression tee
7mm brown plugs and screws
Gas valve
35mm tee with 15mm reducer in the middle
Angled bayonet socket gas fitting 15mm
Tools required:
1. 15mm Cooper pipe cutter
2. Tape measure
3. Pencil
4. Cordless drill
5. Laser
6. Blow torch, flush, solder
7. Hammer drill with chisel bit
8. Pipe bender
How to install:
1. Identify hot, cold and gas pipes. Mark them with marker
2. Measure kitchen sink, dish washer, washing machine gas cooker and hand wash basin.
3. Visualise where you'll run the pipes
4. Use the laser to mark your plugs
5. Install the clips on position for hot, cold and waste
6. Run the waste pipe first and glue all the joints
7. Run the hot and cold water pipes. Solder all the joints
8. Install the 35mm tee for the gas cooker.
Job complete
Please NOTE: You MUST be a gas safe registered to be able to do gas work.
For a profesional:
Duration of work: 1 day
Profit: £650
https://private-jobs.co.uk/plumber
to