18/08/2022
Hey everyone! 👋
Today we are going to share an informative write-up about the “Cup and Handle” pattern along with a few exhibits that may help you solidify your understanding of this chart pattern.
⚠ Please remember this is an educational post to help all of our members better understand concepts used in trading or investing. This in no way promotes a particular style of trading!
⚡ 𝗧𝗵𝗲 𝗽𝗼𝘀𝘁 𝘄𝗶𝗹𝗹 𝘀𝗵𝗲𝗱 𝘀𝗼𝗺𝗲 𝗹𝗶𝗴𝗵𝘁 𝗼𝗻 𝘁𝗵𝗲 𝗳𝗼𝗹𝗹𝗼𝘄𝗶𝗻𝗴 𝘁𝗼𝗽𝗶𝗰𝘀:
→ Basics and identification of the pattern
→ Components
→ Important aspects
🔹 𝗪𝗵𝗮𝘁 𝗶𝘀 𝗮 𝗖𝘂𝗽 𝗮𝗻𝗱 𝗛𝗮𝗻𝗱𝗹𝗲 𝗽𝗮𝘁𝘁𝗲𝗿𝗻?
• The Cup and Handle is a bullish continuation pattern that resembles a cup with a handle.
• The cup is visualized as the alphabet "u" and looks like a rounding bottom pattern.
• The handle is formed as a range or a smaller “u”.
• The cup marks a consolidation phase whereas the handle has a slight downward move, which marks a retest phase.
• The handle is meant to signal a buying opportunity. When this part of the price formation is over, the stock may reverse the course and resume the prior uptrend.
🔸 𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁𝘀 𝗼𝗳 𝗮 𝗖𝘂𝗽 𝗮𝗻𝗱 𝗛𝗮𝗻𝗱𝗹𝗲 𝗽𝗮𝘁𝘁𝗲𝗿𝗻:
The cup and handle chart has 3 main components:
• Cup
• Handle
• Neckline
🔹 𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗮𝘀𝗽𝗲𝗰𝘁𝘀:
👉 𝟭. 𝗣𝗿𝗶𝗼𝗿 𝗧𝗿𝗲𝗻𝗱: The cup and handle pattern is a bullish continuation pattern, hence the prior trend should be an uptrend.
👉 𝟮. 𝗖𝘂𝗽 𝗹𝗲𝗻𝗴𝘁𝗵: In general, the cups with longer and more "U" shaped bottoms that resemble a rounding bottom, provide a stronger signal. This ensures that the cup is a consolidation pattern with valid support at the bottom of the “U”. The perfect pattern would have equal highs on both sides of the cup, but this is not always the case. In general, cups with sharp "V" bottoms should be avoided because there is almost no consolidation in this case.
👉 𝟯. 𝗖𝘂𝗽 𝗱𝗲𝗽𝘁𝗵: Normally, the cup should not be overly deep. In practice, the cup depth can be up to 60-70% of the last swing move. (This can vary widely, though.)
👉 𝟰. 𝗛𝗮𝗻𝗱𝗹𝗲: The handle can occur in the form of a flag, a pennant, or a rectangular consolidation. This is the final retracement phase before the impulsive move higher. By and large, the handle can retrace anywhere between 40-60% of the depth of the cup.
👉 𝟱. 𝗕𝗿𝗲𝗮𝗸𝗼𝘂𝘁: Bullish confirmation comes when the pattern breaks above the neckline (made using the prior highs) with a good volume.
👉 𝟲. 𝗩𝗼𝗹𝘂𝗺𝗲: In general, the volumes should decrease during the formation of the base of the cup and during the formation of the handle. Conversely, the volumes should pick up when the stock begins to make its move higher, back up to test the previous high.
👉 𝟳. 𝗧𝗮𝗿𝗴𝗲𝘁: Using the measurement objective, the target comes out to be equal to the depth of the cup. It can be measured by calculating the distance between the bottom of the base and the neckline.
👉 𝟴. 𝗦𝘁𝗼𝗽-𝗹𝗼𝘀𝘀: Ideally, the stop loss is placed at the lowest point of the handle. But if the price oscillated up and down a number of times within the handle, the stop-loss can also be placed below the most recent swing low.
Thanks for reading! As we mentioned before, this isn't trading advice, but rather information about a tool that many traders use. Hope this was helpful! 😊