AGI OIL JOB

AGI OIL JOB With the head office in France and its two outsourcing subsidiaries AGI Oil Job Romania and A.G.I.

Assistance Générale Internationale is an experienced technical services company, providing consultants for the upstream and downstream industry for more than 30 years. Algeria, AGI represents a consultancy management team with an extensive experience in the Oil & Gas industry, the nuclear sector and crewing.

One of our Clients is currently looking for: COMMISSIONING MANAGER Location ALGERIARotation - 12 weeks on, 2 weeks off...
07/05/2015

One of our Clients is currently looking for:

COMMISSIONING MANAGER

Location ALGERIA
Rotation - 12 weeks on, 2 weeks off. Minimum 50 hours per week.
Duration of project - 30 weeks approximately.
Flights, accommodation, transport, per diem, medical cover, security provided.
Power Plant experience and French language is a MUST.

You can apply your cv at
[email protected]

03/03/2014

PLANNING SHUT DOWN ENGINEER
Location: Mannheim Germany
Mobilization Date: 10/03/2014
Duration: 12 months
Conditions : 6 working days per week, one return home per month allowed (3
consecutive days including WE days)
DEMANDS:
Primavera P6 & Microsoft Office
Creating and monitoring Schedules
+ Preparation of a shut down unit
+ Shut down process for Chlorine units for work upgrading

If you are interested in our offer, please send us as soon as possible your updated résumé (including date of birth and nationality) and revert with the information here-below:
Agreement to submit your CV and a COPY OF YOUR PASSPORT with here-presented locations and conditions;
Expected DAILY RATE in Euros per working days or on a monthly basis (home period not paid);
AVAILABILITY date (notice to give from present employer) .

Please apply with your CV and requested information at: [email protected].

21/02/2014

OFFSHORE LEAD PRINCIPAL STRUCTURAL ENGINEER
Location: Abu Dhabi (offshore)
Mobilization Date: immediate (urgent)
Duration: 24 months
Conditions : to be defined by the client
DEMANDS:
Experience in offshore structure: 12-15 years
Experience as lead engineer: 5-8 years (on EPCI offshore project)
Total experience : 15-20 years
Civil / Structural Engineering Master's Degree is preferred Advanced
Knowledge of : SACS, or similar software used for structural analysis

If you are interested in our offer, please send us as soon as possible your updated résumé (including date of birth and nationality) and revert with the information here-below:
Agreement to submit your CV and a COPY OF YOUR PASSPORT with here-presented locations and conditions;
Expected DAILY RATE in Euros per working days or on a monthly basis (home period not paid);
AVAILABILITY date (notice to give from present employer) .

Please apply with your CV and requested information at: [email protected].

18/02/2014

MECHANICAL FIELD ENGINEER
Location: ONSHORE MEXICO (BRASKEM - ethylene cracker based ethane)
Mobilization Date: 01/03/2014
Duration: 12 to 18 months
Rotation: 2 months on site / 11 days off (including travel days) , 6 days / week - 10 Hours / day
DEMANDS:
Particular skills : Extruder and pneumatic conveyor
Spanish will be an advantage

If you are interested in our offer, please send us as soon as possible your updated résumé (including date of birth and nationality) and revert with the information here-below:
Agreement to submit your CV and a COPY OF YOUR PASSPORT with here-presented locations and conditions;
Expected DAILY RATE in Euros per working days or on a monthly basis (home period not paid);
AVAILABILITY date (notice to give from present employer) .

Please apply with your CV and requested information at: [email protected].

10/02/2014

Please apply with your CV at: [email protected]

Project Control Technician 1,300 – 1,500 USD$ (this salary is inclusive of all fixed overtime)
Logistics Coordinator 1,600 – 2,000 USD$ (this salary is inclusive of all fixed overtime)
Lifting Superintendent 2700 – 3,100 USD$ (this salary is inclusive of all fixed overtime)
Crane Operator 700 - 800 USD$ (this salary is inclusive of all fixed overtime)
Location: Qatar
Mobilization Date: ASAP
Duration: 12 month++
Rotation: resident
Salary : 800 – 900 USD$ (this salary is inclusive of all fixed overtime)
The client undertakes to provide, at no cost to the employee:
a. Camp Accommodation

b. Food
c. Transportation to and from site
d. PPE
e. Annual Return Ticket
f. Government Medical Cover
g. Mobilization and Demobilization

10/02/2014

Please apply with your CV at: [email protected]

MECHANICAL TECHNICIAN (95 Vacancies)
Location: Qatar
Mobilization Date: ASAP
Duration: 12 month++
Rotation: resident
Salary : 800 – 900 USD$ (this salary is inclusive of all fixed overtime)
The client undertakes to provide, at no cost to the employee:
a. Camp Accommodation

b. Food
c. Transportation to and from site
d. PPE
e. Annual Return Ticket
f. Government Medical Cover
g. Mobilization and Demobilization
Job Description
a. Must have more than 6 years’ experience in mechanical maintenance works in the Petrochemical or Power Generation industry.
b. Educational qualifications: ONC or equal in a relevant discipline or standard based qualification (NVQ level 2) or equivalent. Note: May be required to undertake Competency Based test witnessed by the COMPANY Discipline Engineer.
c. Must have a fairly good knowledge & understanding of various process equipment.
d. Must be able to read, write and speak English. (IELTS 5 Equivalent)
e. Must have a good understanding of QA/QC and HSE compliance audits, site procedures and working instructions.
f. Must be able to place and remove spades and to open and close pipe fl**ges, recognise the gasket types and types of bolts.
g. Must have experience in and be able to perform a proper slinging and lifting with chain-blocks.
h. Must have experience in and be able to properly pull-up gland packing and replace it.
i. Must have experience in and be able to remove and assist in re-installing pumps, motors and mixers.
j. Must have experience in and be able to replace V-belts.

k. Must be able to open manholes on vessels and columns and remove internals.
l. Must have received training and have experience in tightening bolts with a manual torque wrench.
m. Must have experience in and be able to perform an alignment with reverse dial gauge method under supervision.
n. Must have experience in and be able to execute hydro tests on piping and static equipment.
o. Must be able to report close out activities & capture work history in CMMS.

10/02/2014

Please apply with your CV at: [email protected]

SENIOR MECHANICAL TECHNICIAN (10 Vacancies)
Location: Qatar
Mobilization Date: ASAP
Duration: 12 month++
Rotation: resident
Salary : 1,300 – 1,700 USD$ (this salary is inclusive of all fixed overtime)
The client undertakes to provide, at no cost to the employee:
a. Camp Accommodation

b. Food
c. Transportation to and from site
d. PPE
e. Annual Return Ticket
f. Government Medical Cover
g. Mobilization and Demobilization
Job Description
a) Must have more than 10 years’ experience in mechanical maintenance works in the Petrochemical or Power Generation industry.
b) Educational qualifications: OND o r equal in a relevant discipline or standard based qualification (NVQ level 3) or equivalent. Note: May be required to undertake Competency Based test witnessed by the COMPANY Discipline engineer.
c) Must have a fairly good knowledge & understanding of various process equipment.
d) Must be able to read, write and speak English (IELTS 6 Equivalent) and to be able to communicate with the majority manpower in their language.
e) Must be capable of supporting QA/QC and HSE compliance audits, site procedures and working instructions.
f) Must be trained and proficient with alignment of rotating equipment with reverse dial gauge alignment and preferably rotalign / optalign equipment.
g) Verifies alignment and tolerances of moving parts, using measuring instruments, such as dial indicators and thickness gauges.
h) Must be able to interpret job requests, perform tests to confirm the problem and propose repair methods without permanent supervision.

i) Must have experience in and be able to place and remove spades and to open and close pipe fl**ges, recognise the gasket types and types of bolts / nuts.
j) Familiar with assembly and testing of safety and relief valves, performs valve testing by using test benches.
k) Must have experience in and be able to perform proper slinging and lifting with chain- blocks and small cranes.
l) Should be able to deputise for the Supervisor and act as Leader to less experienced technicians.
m) Must have experience in and be able to execute preparation of work packs, e.g. to carry out all the necessary work planning and preparations to be able to execute the site works and compile the relevant information in a work pack for submission with the Permit to Work request.
n) Must have full understanding of Company’s Permit to Work system and be able to exercise

his duties under this system, e.g. in a role as Permit Acceptor. NB: Persons failing Company’s PTW

course shall not be designated as Senior Technician.
p) Must be able to lead a group of Technicians and/or Helpers.
Meets all minimum requirements for Mechanical Technician.

For Senior Mechanical Technicians additional skills are required. Depending on the designated area of deployment these skills are:
Pipe fitting

a) Must have more than 5 years’ experience in pipefitting work in the Petrochemical or Power generation industry.

b) Must be able to make sound assessment of sealing surfaces.

c) Must be able to read and draw isometric drawings.

d) Must be able to lead a group of Junior Technicians and or Helpers.

e) Should be able to deputise for the Supervision and act as Leader to less experienced Pipe Fitters.

f) Must have experience in and be able to fit all piping as per isometrics

g) M u s t be able to fit a 45-degree pipe-to-pipe connection.

h) Must be able to repair and make steam tracing.
Torqueing/Tensioning

a) Must have more than 5 years’ experience as a mechanical tradesman in the Petrochemical industry of which at least 2 years has been performed in the role of a Torque/Tensioning Technician.

b) Must have good and proven knowledge & understanding of torqueing/bolt tensioning.

c) Must be able to understand and communicate the requirements of Companies Fl**ge Tightening

procedure and be able to execute fl**ge management in line with this procedure. d) Must be able to understand job tasks and take verbal instruction.

Rotating Equipment

a) Must have a minimum of 5 years’ experience as a Rotating Equipment Mechanical Technician.

b) Must have experience in and be able to properly pull-up gland packing and replace it.

c) Must have experience in and be able to remove and assist in re-installing pumps, motors and mixers.

d) Must have experience in and be able to replace V-belts and couplings.

e) Must have experience in a n d be able to r e p l a c e mechanical seals in p u m p s and compressors.

f) Must have experience in and be able to perform an alignment with reverse dial gauge method under supervision.
Valve Maintenance

a) Must be able to make sound assessment of sealing surfaces.

b) Must be able to read and understand engineering drawings.

c) Must understand the various types of valves e.g. Gate Valve, Globe Valve, Safety Relief Valve, Control Valve, etc.

10/02/2014

Please apply with your CV at: [email protected]

MECHANICAL SUPERVISOR (14 Vacancies)
Location: Qatar
Mobilization Date: ASAP
Duration: 12 month++
Rotation: resident
Salary : 1,600 – 2,000 USD$ (this salary is inclusive of all fixed overtime)
The client undertakes to provide, at no cost to the employee:
a. Camp Accommodation

b. Food
c. Transportation to and from site
d. PPE
e. Annual Return Ticket
f. Government Medical Cover
g. Mobilization and Demobilization
Job Description
a) Must have more than 10 years’ experience in mechanical maintenance works in the Petrochemical or Power Generation industry of which at least 5 years has been performed in the role of a Supervisor.
b) Educational qualifications: OND o r equal in a relevant discipline or standard based qualification (NVQ level 3) or equivalent. Note: May be required to undertake Competency Based test witnessed by the COMPANY Discipline engineer.
b) Must have a fairly good knowledge & understanding of various process equipment.
d) Must be able to work with computers utilising Microsoft Windows and Office suite packages.
e) Must have working knowledge of C o m p u t e r i z e d Maintenance Management System (CMMS).
f) Must be able to read, write and speak English (IELTS 6 Equivalent) and to be able to communicate with the majority manpower in their language.
g) Must be capable of executing QA/QC / HSE compliance audits on site procedures and HSE Plans.
h) Must have experience in and be fully aware of the different pipes, gaskets and bolting materials.
i) Must be familiar with the different welding techniques, welding tools and equipment.

j) Must have experience in and be familiar with the alignment methods utilizing laser alignment equipment and dial gauges.
k) Must be able to organise up to 10 mechanical technicians, welders and pipe fitters.
l) Must be able to organise the materials, services and equipment for his job.
m) Must have experience in and be able to trouble shoot, test and propose repair methods without any supervision.
n) Must have experience in overhauling of equipment like various types of pumps, fans, blowers, reciprocating compressors, etc. at site.
o) Must have experience in and be able to plan associated activities, scaffoldings, electric cable works etc. well in advance.

p) Must have experience in and be able to remove and reinstall all rotating equipment.
q) Meet all requirements for Senior Technician and Fitter.

10/02/2014

Please apply with your CV at: [email protected]

PLANNER (6 Vacancies)
Location: Qatar
Mobilization Date: ASAP
Duration: 12 month++
Rotation: resident
Salary : 3,200 – 3,500 USD$ (this salary is inclusive of all fixed overtime)
The client undertakes to provide, at no cost to the employee:
a. Camp Accommodation

b. Food
c. Transportation to and from site
d. PPE
e. Annual Return Ticket
f. Government Medical Cover
g. Mobilization and Demobilization
Job Description
a. Responsible for preparing the 14 (fourteen) and 90 (ninety) day look-ahead work plans with different level detail for the works carried out by the CONTRACTOR.
b. Must have at least 10 years’ experience in engineering work in the Petrochemical or Power Generation industry, of which at least 5 years have been performed as Planner / Scheduler.
c. Educational qualifications: OND or equivalent relevant discipline or standard based qualification (NVQ level 3) or equivalent. Note: May be required to undertake Competency Based test witnessed by the COMPANY Discipline Engineer.
d. Must have a fairly good knowledge & understanding of various process equipment). M u s t be able to read, write and speak English (IELTS 6 Equivalent).
e. Must be able to work with computers utilising Microsoft Windows and Office suite of packages.
f. Must be fully aware of different pipes, gaskets and bolting materials (PEFS and piping class).
g. Must be able to identify and request for the appropriate materials and equipment for larger jobs.
h. Must be able to identify and request for the appropriate support services required during the ex*****on of the work.
j. Must be able to prepare a 14 (fourteen) and 90 (ninety) day look-ahead work plan with different level detail for all the works of the CONTRACTOR.
k. Must be able to work with Primavera P6 planning software packages. Must have experience with resource loading and scheduling to produce progress status reports.
l. Must be able to read isometric drawings for engineering repairs and small plant changes. m) Must be able to interpret lifting plans and translate these to work plans.
m. Must be able to prepare a detailed work packs and plans for a small to medium shutdowns. o) Preferably have advanced level knowledge and experience with SAP-PM, CMMS and MS (Microsoft) Access Database along with other MS Office applications.

10/02/2014

Please apply with your CV at: [email protected]

MECHANICAL FIELD ENGINEER (4 Vacancies)
Location: Qatar
Mobilization Date: ASAP
Duration: 12 month++
Rotation: resident
Salary : 3,200 – 3,800 USD$ (this salary is inclusive of all fixed overtime)
The client undertakes to provide, at no cost to the employee:
a. Camp Accommodation

b. Food
c. Transportation to and from site
d. PPE
e. Annual Return Ticket
f. Government Medical Cover
g. Mobilization and Demobilization
Job Description
h. Responsible for managing a distinct area within the Contractor’s area of responsibility ensuring that work is being planned and executed in a safe and efficient manner to meet the schedule and work standards. The Mechanical Field Engineer leads a group of Mechanical Supervisors and reports to Mechanical Maintenance Engineer.
i. Must have more than 10 years’ experience in engineering works in the Petrochemical, Petroleum Refining industry.
j. Educational qualifications: HND in Mechanical discipline or additional standards based qualification.
k. Must have a fairly good knowledge & understanding of various process equipment) M u s t be able to read, write and speak English (IELTS 6 Equivalent).
l. Must be capable of assisting in QA / QC / HSE compliance audits on site procedures and HSE Plans.
m. Must be able to work with computers utilising Microsoft Windows and Office suite of packages.
n. Must be fully aware of different pipes, gaskets and bolting materials.
o. Must have knowledge of different welding techniques and its quality requirements.
p. Must be able to organise up to 7 Supervisors and be stand in for the Mechanical Maintenance Engineer.
q. Must be able to organise the materials and equipment for larger jobs.
r. Must be able to trouble shoot, test and propose repair methods without any supervision.

m) Must be able to make and verify lifting plans and structural calculations.
s. Must be able to plan associated activities for a smaller shutdown WORKS well in advance.
t. Must be able to advice, support and replace the Supervisors if necessary.
u. Preferably have a working level experience in SAP-PM and CMMS.

10/02/2014

Urgent inquiry for airplane engineers mainly specialized in fit outs

22/01/2014

DRILLING SUPERVISOR (30 Vacancies)
Location: UAE, Offshore
Mobilization Date: ASAP
Duration: 12 month++
Rotation: 28 days on / 28 days off
DEMANDS:
Minimum 5 years work experience.
Degree in relevant Engineering discipline .
Extensive experience and knowledge of drilling, completion and petroleum engineering functions.
Ability to understand and build on concepts and ideas from other disciplines in Business Units and sub sea engineering .
Influencing skills, planning organizing and coordination skills.

If you are interested in our offer, please send us as soon as possible your updated résumé (including date of birth and nationality) and revert with the information here-below:
Agreement to submit your CV and a COPY OF YOUR PASSPORT with here-presented locations and conditions;
Expected DAILY RATE in Euros per working days or on a monthly basis (home period not paid);
AVAILABILITY date (notice to give from present employer) .

Please apply with your CV and requested information at: [email protected].

Address

Constanta

Website

Alerts

Be the first to know and let us send you an email when AGI OIL JOB posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share