Klug Designs

Klug Designs I'm an engineer, welder, fabricator, woodworker and plain jack of all trades. This page is to showcase some of my projects, I'm open to commissions.

Butters just needed a chair to be a garage cat!
07/25/2021

Butters just needed a chair to be a garage cat!

Another pair of bag boards out the door. I learned more with this iteration as I pushed for more improvement.
07/14/2021

Another pair of bag boards out the door. I learned more with this iteration as I pushed for more improvement.

I haven't posted much lately but I have been busy. Just staying to myself to try and keep my focus. I put up a tarp cu...
02/05/2021

I haven't posted much lately but I have been busy. Just staying to myself to try and keep my focus. I put up a tarp curtian to keep dust on my side, light refurb on a power wheel, and a toy horsey for the Goo. Next I'm doing some more organization before building a shop press to replace all the joints on my truck, maybe front differential also. Then on to a small DIY CNC router, I want to try for a semi vertical unit to save on space but that has it's own design considerations.

The baby made a big mess.... Or it's nap time and I got out the planer.
11/08/2020

The baby made a big mess.... Or it's nap time and I got out the planer.


Got a few little projects finished tonight that will help organise and keep the air clean in the garage.
10/11/2020

Got a few little projects finished tonight that will help organise and keep the air clean in the garage.

This commission went out today and was alot of fun to make.
09/22/2020

This commission went out today and was alot of fun to make.


Carefulling was in progress today! Safety squints, Double rubbers, and mother on speed dial! Once the bracket pulled ou...
07/12/2020

Carefulling was in progress today! Safety squints, Double rubbers, and mother on speed dial! Once the bracket pulled out of the existing 1/2 plywood I added a patch of two 1/2 inch plywood scraps sammiched together with plenty of glue and screws to let her suffer another run.

04/07/2020

We founded Anyone Can Build Robots with one goal in mind: making sure people across the globe unders

Future me is going to be pi**ed that present/past me did this!
02/16/2020

Future me is going to be pi**ed that present/past me did this!

Just a few pictures of some work items and some smaller projects at home. Picking up brazing has helped more than I wou...
02/16/2020

Just a few pictures of some work items and some smaller projects at home. Picking up brazing has helped more than I would have thought.

It didn't look like much on the ground but once I got the rack built it filled up quick. Freeing up floor space in my s...
02/10/2020

It didn't look like much on the ground but once I got the rack built it filled up quick. Freeing up floor space in my shop for more projects.

Got a few boards to pull nails, skip plane, and joint. It is going pretty quick and learning new methods from last time ...
02/09/2020

Got a few boards to pull nails, skip plane, and joint. It is going pretty quick and learning new methods from last time I ripped pallets. All prepping for bigger things to come.

Address

Bettendorf, IA

Website

Alerts

Be the first to know and let us send you an email when Klug Designs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category