804 FAB Design & fabrication of custom 3D printed solutions for manufacturers and makers

09/06/2024
08/29/2024

These clean-removable 3D printed standoffs use 3M Command Strips for mounting graphic panels, wall art, and decor. Cleats can be screwed to the back of your display piece, or glued in place - ideal for display pieces that are too thin to screw into. Each standoff supports up to 1 lb.

No visible hardware on the face—just a clean, modern look. Choose from square or round profiles available in multiple colors, with custom colors and finishes on request to complement your display pieces.

Check out the links in my bio to see more. Get in touch for design and fabrication of custom 3D printed solutions.

08/08/2024

Two screws running internally through the body of this desk lamp mount create a strong, stiff mount that doesn’t flex when tightened in place. The screws also reinforce the printed layers, preventing separation along the layer lines when the mount is tightened in place. When designing and 3D printing custom k***s like the one used here, I can take into account how much torque can be applied to the k**b. The diameter of the k**b used in this design lets the user apply enough torque to securely tighten the desk mount without applying so much torque that the mount is over-stressed. Check out the links in my bio to see more. Get in touch for design and fabrication of custom 3D printed solutions.

06/27/2024

Testing out a polypropylene hinge concept. Polypropylene has good elasticity and flexibility making it resistant to cracking and stress.

The multi-material design used here combines the flexibility of polypropylene, the strength of PETG, and the aesthetic of matte PLA.

These concept hinges were designed for 6mm PVC panels, but they can be designed to accommodate other panel thicknesses. Size, shape, color, and finish are all easily customizable.

Check out the links in my bio to see more. Get in touch for design and fabrication of custom 3D printed solutions.

06/06/2024

3D printed wire bending jigs were used to produce this 3D printed tape roll holder designed for the IKEA Skadis pegboard. These jigs provide a way to repeatedly form coated steel wire to a consistent shape. The body of the holder is printed in durable PETG plastic.

These 3D printed snap-mount standoffs can be produced in hundreds of different colors and finishes, so you can find the ...
05/24/2024

These 3D printed snap-mount standoffs can be produced in hundreds of different colors and finishes, so you can find the perfect compliment to your display.

Links to products and STL files in my bio.

05/16/2024

These 3D printed standoffs are all about customization. Compliment your display pieces with a variety of stock sizes and colors to choose from. Custom sizes and colors are available on request.

They’re ideal for graphic panels & signage, but also for wall art and decor - anything you can glue or screw the provided male cleat to.

04/04/2024

Testing out a concept for 3D printed stand-offs that snap-mount in place, offering a custom alternative to traditional stand-off hardware. This design can easily be modified to create stand-offs of different lengths and shapes, with different surface patterns and textures. They can also be produced in any number of colors.

Check out 804fab.com and get in touch for design and fabrication of custom 3D printed solutions.

Address

Midlothian, VA
23114

Alerts

Be the first to know and let us send you an email when 804 FAB posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 804 FAB:

Share