D's Job Shop

D's Job Shop Job shop services. Vintage farm tractors, bushings for John Deere clutch lever, boring IH PTO housings, front axle bushings, PTO shafts etc.. Shaft turning.

Will be expanding to babbit pouring for connecting rods here shortly. Small walk-in jobs welcomed.

07/17/2023

Repairing links on a New Holland 469 Haybine.

05/03/2023

Have to modify some Kawasaki UTV rims to fit for customer.

Getting ready to cut some IH 560, 660 Clutch and Brake Pedal Shafts. Clocked the 2 Keyways, hole etc.. One is already so...
03/31/2023

Getting ready to cut some IH 560, 660 Clutch and Brake Pedal Shafts. Clocked the 2 Keyways, hole etc.. One is already sold as of yesterday before I even got it cut.

Have a potential large retail customer possibly wanting to work together for more of these and other work they have, crossing my fingers in hopes of it working out. When its made in the USA, it should stay in the USA.

03/21/2023

IHC 706 PTO Housing.
Boring Out a Heavily Worn Bearing Area to Install a New PTO Housing Bushing . New Bushing Needs a .001" Press Fit.

03/17/2023

Ford 3000, got the new bushing made and pressed into place. Sized to accept the king pin. Yep, the king pin does have wear, but he didnt have another, so this one goes back into it. Drilled and tapped 1/8-27 for a grease zerk. Dont know what Ford was thinking not having a grease zerk in this area. Some may question why the new bushing isnt bronze, which is a legit question. The old one was steel with a steel band around it. Maybe for the size and thickness and width, excessive wear might be an issue? But its done and ready for customer pickup. Be good for another 40 years.

03/17/2023

Boring out a Ford 3000 axle to accept new bushing. This was oblong by .027".

McCormick Deering Steering Block. Origional holes completly worn out, bolts as well. New part looks pretty nice. Almost ...
03/15/2023

McCormick Deering Steering Block. Origional holes completly worn out, bolts as well. New part looks pretty nice. Almost like the original part.

03/05/2023

Dumore 8072 Tool Post Grinder. Awesome little unit for bringing in exact dimensions for bearing fits, internal and external grinding, bushing work etc.. A little chatter after a test run, a bit long on stock stick out, you can see chatter marks, but cant feel it. Had to disassemble motor and install new bearings and power cord. Here, the unit is running at 6,500 rpm. Will spin up to 42,500 rpm., largest stone of 5" can be mounted.

03/05/2023

Hardig Air-Flo Fixture. For sharpening and relieving cutters and endmills. When air is applied, this rides on a very thin air film for easy movement.

Some heavy boring went into these to get them looking this nice. Went .002" over so they were a nice slip fit. Did a qui...
02/19/2023

Some heavy boring went into these to get them looking this nice. Went .002" over so they were a nice slip fit. Did a quick weld job and now their completed. Deliver tomorrow morning and theyll be happy. Turned out almost like new.

02/19/2023

This will be interesting. Not a machined surface to tell me if i have it square in the chuck. So I guess ill make a few passes and adjust it from there.

02/19/2023

A new bushing being added to a weldment that goes on the bottom of the boom that the bucket pivots on, this is off a skid steer. Going to mount it in a 4 jaw chuck, indicate it in on what left of the origional bore and bore it open to 2" to accept the new bushing.

Address

Monroe, WI
53566

Telephone

+16083129983

Website

Alerts

Be the first to know and let us send you an email when D's Job Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to D's Job Shop:

Shortcuts

Share

Category