We Know Mold

04/16/2026

🧼 MOLD REMEDIATION DONE RIGHT – HORSHAM, PA

Not all “mold treatments” are created equal… and here’s the truth most people don’t hear:
👉 Mold needs to be REMOVED—not just “killed.”

Recently in Horsham, PA, our team at We Know Mold completed a full basement remediation, going beyond surface-level treatment to properly address the issue at its source.

💥 Here’s how we handled it:
✔️ Containment set up to prevent cross-contamination
✔️ Physical removal of impacted materials (the key step most skip)
✔️ HEPA vacuuming + detailed cleaning
✔️ Application of a hydrogen peroxide-based botanical antimicrobial for treatment.

Why not just “kill” it?
Because even dead mold spores can still trigger allergies and IAQ issues. If it’s still there, it’s still a problem. That’s why industry standards focus on removal + proper cleaning, not just spraying chemicals and calling it a day.

At We Know Mold, we follow real remediation protocols—not shortcuts.

📞 We Know Mold – 24/7 Response
🌐 WeKnowMold.sucks
☎️ (855) 266-6653

If you see mold, don’t mask it—remove it the right way.

04/14/2026

🚨 FRIDAY NIGHT WATER DAMAGE? WE’RE ON IT. 🚨

Got the call at 12:00 AM in Jenkintown, PA—and we were on-site within an hour ready to get to work.

💧 Quick response made all the difference:
✔️ Saved the hardwood floors (no demo 🙌)
✔️ Kept the kitchen cabinets intact
✔️ Stopped the moisture before it spread further

We brought in the right tools for the job:
🔹 Injectidry mat system to pull moisture out of the hardwoods
🔹 Viking PDS-21 wall cavity driers to dry inside the walls
🔹 LGR dehus + air movers dialed in with proper airflow
🔹 Moisture mapping to track everything in real time

At We Know Mold, we’re certified in structural & commercial drying, so we’re not guessing—we know exactly how to hit drying goals and save materials when it counts.

📞 24/7 Emergency Response
🌐 WeKnowMold.sucks
☎️ (855) 266-6653

Middle of the night, weekend, whatever it is—we’ve got you covered.

04/01/2026

With IICRC - Institute of Inspection, Cleaning and Restoration Certification – I just got recognized as one of their top fans! 🎉

03/16/2026

Water Damage Pros Know the Details 💧🔧

It’s the little things that separate a quick cleanup from true professional water mitigation.

In this clip, the We Know Mold team is dialing in the details after a water loss. You’ll see a couple tricks of the trade we use every day:

🔹 Securing remaining drywall edges so future seams don’t telegraph through the finish.
🔹 Undercutting insulation so we can tuck it neatly back into the wall cavities instead of leaving gaps that affect the thermal envelope.
🔹 Keeping everything clean, tight, and ready for proper structural drying and repairs.

In the restoration world, details like this matter. Proper demo lines, controlled removal, and clean reinstallation points make a huge difference for the trades that follow—and for the final result the homeowner sees.

Just another day doing professional water mitigation the right way.

📍 Available 24/7 – Philadelphia & Surrounding Areas
🌐 WeKnowMold.sucks
📞 (855) 266-6653

03/10/2026

Going the Extra Mile After the Flood 💧🔧

Not your typical day for the team at We Know Mold, but when a long-time client and friend needed help after we dried them out from severe flooding, we stepped in. Today we're repairing a custom baseboard detail in a commercial space as part of the recovery process.

Water damage can affect every part of a property — sometimes even the fine details. From emergency extraction to the finishing touches, we’re here to help get things back to normal.

24/7 Emergency Water Damage & Mold Remediation
📍 Serving Philadelphia & Surrounding Areas
📞 (855) 266-6653
🌐 WeKnowMold.sucks

03/05/2026

🧪 The Mold Industry Is Evolving — And We’re Here For It.

The mold remediation industry is finally starting to shift in the right direction. Jeff Cross recently interviewed Doug Hoffman about how things are moving away from the old mindset of “if it looks clean, it is clean.”

With the federal acceptance of the IICRC S520 standard, the industry is moving toward measured results, documentation, and real verification instead of just appearances. That’s a big step forward.

At We Know Mold, this is something we’ve always believed in. Proper remediation isn’t guesswork — it’s understanding moisture, structural drying, containment, and proper cleaning protocols.

There’s still a lot of confusion in the industry. Some companies just haven’t been taught the right way (and many are willing to learn). Others… well… they’re more focused on the invoice than the process.

We Know Mold holds ourselves to a higher standard and takes real pride in the craft. At the end of the day, remediation should be done right and backed by science — not just what looks clean.

Exciting changes are happening in the mold and microbial industry! From new legislation to important updates in public health policy and military housing, there's a lot to keep an eye on outside the classroom. Learn more: https://cleanfax.com/molds-new-rulebook-and-the-microbial-shift-reshaping-remediation/

02/27/2026

Training day at We Know Mold 💪

Water damage restoration isn’t guesswork — it’s building science.

In this video, Ryan gets the run down on how to properly perform a full moisture map and develop an effective structural drying strategy.... To prepare for his upcoming IICRC-Applied Structural Drying class!

✅ Identifying Category & Class of Loss
✅ Taking penetrating & non-penetrating moisture content readings
✅ Monitoring temperature, RH, and GPP with a hygrometer
✅ Calculating cubic footage
✅ Determining required air changes per hour
✅ Sizing LGR dehumidifiers (PPD) & air movers using industry formulas
✅ Establishing proper v***r pressure differentials

We don’t just drop equipment and hope for the best.
We calculate. We document. We monitor. We adjust.

That’s how you prevent secondary damage, microbial growth, and failed dry-downs.

Serving Philadelphia and surrounding areas with 24/7 emergency response.

📍 Residential & Commercial
📞 (855) 266-6653
🌐 WeKnowMold.sucks

We Know Mold – Emergency Water Damage & Mold Remediation Done Right.

02/25/2026

🚨 Category 3 Water Damage in a Conference Room – Caught Just in Time! 🚨

When it comes to water damage, timing is EVERYTHING.

This commercial conference room experienced Category 3 water damage (also known as “black water”) — the most severe and hazardous type of water intrusion. Category 3 water can contain harmful bacteria, pathogens, and contaminants that pose serious health risks.

💧 The good news?
It was caught immediately.

Because the issue was identified right away, our team at We Know Mold was able to:

✅ Isolate the affected area
✅ Remove contaminated materials safely
✅ Begin professional drying and remediation
✅ Prevent cross-contamination to other parts of the building
✅ Help minimize downtime for the business

Fast action makes all the difference in preventing mold growth and costly structural damage.

If your commercial property experiences water damage — especially Category 3 — don’t wait. Immediate response protects both your property and the people inside.

📞(855) 266-6653
🌐 WeKnowMold.sucks

02/23/2026

🚨 FLOODED Wellness Center RESTORED in Just 30 HOURS – NO DEMO Needed! 💨💧

When a local wellness center experienced unexpected water intrusion, they needed fast, professional mitigation — without tearing apart walls or disrupting their space.

That’s where We Know Mold came in. 💪

🎥 In this video, you’ll see our team in action using:
✔️ Injectidry wall cavity drying systems for targeted, in-place structural drying
✔️ Viking wall cavity driers to aggressively remove trapped moisture
✔️ Advanced moisture mapping & thermal imaging
✔️ A safe, eco-friendly antimicrobial treatment to ensure a clean, healthy environment

💥 Results? Fully dried in just 30 HOURS.
💥 NO demolition required.
💥 Minimal disruption. Maximum efficiency.

If your property experiences flooding, water damage, or hidden moisture — fast response is critical to prevent mold growth and structural damage.

🌱 We use safe, green antimicrobial solutions that are tough on microbes but safe for occupied spaces.

📍 Serving Philadelphia & Surrounding Areas
📞 (855) 266-6653
🌐 WeKnowMold.sucks
⏰ Available 24/7 for Emergency Water & Mold Response

When water damage strikes, don’t demolish — DRY IT RIGHT the first time.

02/21/2026

🐭🚧 Ceiling Demo Surprise… How Many Mice?! 🚧🐭

You never know what you’ll find when you open up a ceiling during a water damage project… 😳

Water damage doesn’t just lead to mold — it can create the perfect environment for unwanted tenants too. That’s why proper containment, safe demo, and thorough remediation matter.

If your ceiling’s sagging, stained, or smells “off”… don’t wait until it turns into a wildlife reveal 😂

📲 WeKnowMold.sucks
📞 (855) 266-6653

02/20/2026

🚨 Emergency Water Damage Response – Wellness Center Flooded After Heavy Rain 🚨

Last night’s rain turned into standing water inside this wellness center. In this walkthrough, you’ll see exactly what we walked into—and how We Know Mold is taking control of the situation immediately.

Our team is drying, sanitizing, and decontaminating this entire space within 24 hours, using professional drying systems, moisture mapping, and industry-approved protocols to prevent mold growth and secondary damage.

Flooded floors don’t just mean water—they mean hidden moisture, contamination risk, and downtime. That’s why speed, verification, and proper drying matter.

If your home or business floods, don’t wait.

🌧️➡️💨 Dry. Clean. Verify.

🔗 WeKnowMold.sucks
📞 (855) 266-6653
⏱️ 24/7 Emergency Response

02/20/2026

When it comes to mold remediation, containment isn’t optional — it’s critical.

In this video, the team at We Know Mold is installing full critical barriers and establishing proper containment to prevent cross-contamination throughout the structure. We’re also verifying and documenting negative air pressure differentials using HEPA-filtered air scrubbers to ensure airborne particulates stay inside the work zone — not in your living space.

Why does this matter?

Because the IICRC S520 Standard for Professional Mold Remediation — the only federally recognized mold remediation standard — requires proper engineering controls, including containment and negative pressure, to protect both occupants and remediation technicians.

Without containment:
• Microscopic spores can migrate to unaffected areas
• HVAC systems can become contaminated
• Secondary damage can occur
• Liability risks increase

Our process includes:
✔️ Critical barrier installation
✔️ Zipper door access points
✔️ HEPA-filtered negative air machines
✔️ Pressure verification monitoring
✔️ Source removal following S520 protocol

We don’t just “spray and pray.”
We remediate by the book — because your health, your property, and our crew’s safety depend on it.

📍 24/7 Emergency Response
🌎 WeKnowMold.sucks
📞 (855) 266-6653

We Know Mold — and we contain it the right way.