Adire Audio

Adire Audio Adire Audio started as a dream to build the biggest, baddest transducers on the planet.

Finished, drying and ready for packaging! We challenge you to find someone that offers a better finish on a "prefabricat...
06/27/2025

Finished, drying and ready for packaging! We challenge you to find someone that offers a better finish on a "prefabricated" birch ply enclosure.

Contact us for all your enclosure and subwoofer needs - we build custom enclosures and subwoofers!

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

bassheadsupply.com The #1 Place for BASS Starting At $199 Shop Now Looking for a subwoofer box? Shop for your specific application. By brandBasshead SupplyDeaf BonceResilient SoundsSundown AudioJL AudioKickerBy number-of-speakers123By speaker-size13.5"8"10"12"15"18"Find a Box Most Popular Box Sizes....

We ended up building another set of the enclosure shown earlier this week for a difference home audio customer. Contact ...
06/27/2025

We ended up building another set of the enclosure shown earlier this week for a difference home audio customer.

Contact us for all your enclosure and subwoofer needs - we build custom enclosures and subwoofers!

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

Cut parts and enclosures get stacked everywhere when we are busy! Contact us for all your enclosure and subwoofer needs!...
06/26/2025

Cut parts and enclosures get stacked everywhere when we are busy!

Contact us for all your enclosure and subwoofer needs!

We build custom enclosures and subwoofers!

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

Here is another set of home audio cabinets we did for a customer with a powder blue finish to match his kitchen cabinets...
06/26/2025

Here is another set of home audio cabinets we did for a customer with a powder blue finish to match his kitchen cabinets. Make sure to check out all the pictures!!!

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

Here is a look at some home audio cabinets we did for a local customer. Simple and effective and lined with insulation a...
06/25/2025

Here is a look at some home audio cabinets we did for a local customer. Simple and effective and lined with insulation at the customer request. He finished these in a durable Line-X to use in his shop.

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

A lot of people don't realize how expensive CNC router bits and tooling can be, especially for router bits used to cut b...
06/24/2025

A lot of people don't realize how expensive CNC router bits and tooling can be, especially for router bits used to cut birch plywood. The resin/glue in birch plywood is actually stronger than most router bits, so we use router bits with a special grade of carbide. Pictured here is a hydraulic tool holder that uses an even clamping force compared to tool holders with collets.

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

Sometimes when we are engraving logos and the vacuum suction is low we just put other panels on the router bed to increa...
06/24/2025

Sometimes when we are engraving logos and the vacuum suction is low we just put other panels on the router bed to increase suction.

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

This is how we package our performance series enclosures. We use foam corner protectors to suspend the enclosure in a 27...
06/23/2025

This is how we package our performance series enclosures. We use foam corner protectors to suspend the enclosure in a 275 double wall carton.

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

Here is a look at going back even further to late 2020 when we moved the position of our CNC router to fit a real commer...
06/23/2025

Here is a look at going back even further to late 2020 when we moved the position of our CNC router to fit a real commercial dust collector. The first picture shows the router in the old location.

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

We moved down to Southern California in at the beginning of 2022. Here is a look at setting up the dust collector and ai...
06/22/2025

We moved down to Southern California in at the beginning of 2022. Here is a look at setting up the dust collector and air compressor at the new location.

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

A rare look at what the enclosure look like when they come out of the clamp. We flush trim off the excess glue, then san...
06/22/2025

A rare look at what the enclosure look like when they come out of the clamp. We flush trim off the excess glue, then sand, apply a round over and then sand some more. Only after all that is done does the finishing process begin.

9:00am - 5:00pm PST Mon - Fri ⏱️
Questions? (415) 742 - 1182 ☎️
[email protected] ✉️
[email protected] ✉️
www.adireaudio.com 🖥️ Adire subs and Adire enclosures!
www.bassheadsupply.com 🖥️ Lots of enclosures and everything else!

Address

Thousand Oaks, CA

Alerts

Be the first to know and let us send you an email when Adire Audio posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share

Category