Al Shorooq Alaali Technical Service

18/03/2014

25/01/2014

Assallamualaikum!

Good Day to Each And Everyone..

AL SHOROOQ TECHNICAL SERVICE would like to thank all of you who likes this page. please spread this page, share this to everyone, to get to know Ideas, Information,or kind of work AL SHOROOQ TECHNICAL SERVICE does.

or you may visit our website:

www.shorooqdubai.ae

Cheers!

Thanks and Have a Nice day to ALL.

Technology driven solutions

23/01/2014

Electrical maintenance means the care & checklist of electrical equipment's/instruments to avoid any breakdown or fault.

To tighten all electrical connections, to upgrade the power rating of safety-switches is also a part of Electrical Maintenance.

21/01/2014

Low Smoke Zero Halogen Indoor/Outdoor Breakout Cable

AFL's Indoor/Outdoor Breakout Cables are perfectly suited for rugged applications and installations requiring increased performance. Low-Smoke Zero Halogen rated I/O Breakout cables are available from 2 - 24 Count with variable sub-cable dimensions to support specific termination and routing requirements. These cables feature a durable IEC compliant Zero-Halogen, UV and Fungal Resistant outer jacket. Sub-cables can be specified at 2.0mm, 2.4mm or 2.9mm diameters to fit the specific application. Additional strength member is applied to specifically support wedge-style industrial termination schemes.

20/01/2014

Closed-circuit television (CCTV) is the use of video cameras to transmit a signal to a specific place, on a limited set of monitors. It differs from broadcast television in that the signal is not openly transmitted, though it may employ point to point (P2P), point to multipoint, or mesh wireless links. Though almost all video cameras fit this definition, the term is most often applied to those used for surveillance in areas that may need monitoring such as banks, casinos, airports, military installations, and convenience stores. Video telephony is seldom called "CCTV" but the use of video in distance education, where it is an important tool, is often so called.

20/01/2014

Structured cabling design and installation is governed by a set of standards that specify wiring data centers, offices, and apartment buildings for data or voice communications using various kinds of cable, most commonly category 5e (CAT-5e), category 6 (CAT-6), and fibre optic cabling and modular connectors. These standards define how to lay the cabling in various topologies in order to meet the needs of the customer, typically using a central patch panel (which is normally 19 inch rack-mounted), from where each modular connection can be used as needed. Each outlet is then patched into a network switch (normally also rack-mounted) for network use or into an IP or PBX (private branch exchange) telephone system patch panel.
Lines patched as data ports into a network switch require simple straight-through patch cables at each end to connect a computer. Voice patches to PBXs in most countries require an adapter at the remote end to translate the configuration on 8P8C modular connectors into the local standard telephone wall socket. No adapter is needed in the U.S. as the 6P2C and 6P4C plugs most commomly used with RJ11 and RJ14 telephone connections are physically and electrically compatible with the larger 8P8C socket. RJ25 and RJ61 connections are physically but not electrically compatible, and cannot be used. In the UK, an adapter must be present at the remote end as the 6-pin BT socket is physically incompatible with 8P8C.
It is common to color code patch panel cables to identify the type of connection, though structured cabling standards do not require it except in the demarcation wall field.
Cabling standards demand that all eight conductors in Cat5/5e/6 cable are connected, resisting the temptation to 'double-up' or use one cable for both voice and data. IP phone systems, however, can run the telephone and the computer on the same wires.

20/01/2014

A group of sockets used to manually connect incoming and outgoing lines together in communications and electronic systems. Using short patch cables, one end is plugged into an "in" line and the other end to an "out" line. Wireless patch panels are also available that provide the cross connections by flipping a switch rather than plugging in wires.