TECAS Technology-Assistance

Name: TECAS Technology-Assistance
Address: Steilweg 29, Stattegg, 8046, AT
Telephone: 0043 316 776 713

Startseite
Österreich
Stattegg
TECAS Technology-Assistance

Anrufen Wegbeschreibung Website

TECAS hat folgende Gewerbeberechtigungen!Unternehmensberatung, Technisches Büro für Maschinenbau, This reduces the number of CNC-machines and the setup time.

Like the brand name "TECAS" (Technology Assistance) says, www.tecas.at will offer technology and assistance for mechanical production. The clamp once technology takes more and more place in the production of complex parts. TECAS can assist with knowledge and experience in all kind of machining. TECAS can offer following service. Consulting:
•To choose and purchase a new machine
•Develop and calculate a new machining method
•Tool design and tooling
•Assist in purchasing and testing postprocessors for CAM and Verification programs
Programming:
•TECAS will program your work piece with maximum efficiency
•TECAS will also program customized cycles for easy programming
•Optional TECAS will test and run programs on your machine
•Optimizing for a save machining process
Training:
•Programmer training
• Basic Programmer training
• Advanced Programmer training
• Training for programming with parameters
• Training for programming cycles
•Operator training
• Basic Operator training
• Advanced Operator training
•Extended operator and programmer training for:
• Parts probing
• Tool breakage monitoring
• Process monitoring
• Data output with the Printer
• Tool probing
• Tool life monitoring
• Data management
Production support:
•Engineering
• Planning the machining process
• Tool management
• Training for programming with parameters
• Training for programming cycles
•Purchasing
• Planning the right machine for your work
• Choose from the offers of different manufacturers
• Suggest the best solution
• subcontracted work:
• Programming
• operating your machine tools

10/03/2022

This is a part of my activities see also my websites:

https://sites.google.com/view/tecas-egmont/customized-training
and
https://tecas.info/WFL-training

08/03/2022

Basic Operator training for WFL - Millturn

Summary:
After this training is the Operator able to handle the machine with all standard functions including standard measuring with the touch probe.

Topics:
a) Procedure for switching the machine on (open close all doors and the chuck, start the tool loader, cancel all alarms, and reference all axis)
b) Operate all axis manually in Jog with key and with the hand wheel
c) Operate the chuck ,steady and tailstock manually
d) Start a Program after shift change or after an alarm in any position
e) Stop and start the Program, overstore the Program
f) Clamp the work piece with Chuck Steady and Tailstock
g) Interpret the alarm message record it and cancel it
h) Assemble used tools measure it and replace it in the machine
i) Load and remove tools from the machine
j) Check the first movement of a adjusted tool by single block in the first moves
k) Reactivate the tools in the tool management
l) Release axis of the tool loader and remove the tools from the gripper.
m) Check and refill the coolant and the oils

Objective:
After the training, participants can operate a WFL MILLTURN and machine simple and medium complexity parts.

Participants:
Machine operators with good operating skills (basics of NC technology).
Also for Programmers which are looking for more knowledge about machining.

Duration:
5 working days - MON – FRI 8 am - 5 pm, (40 hours)

For mor see: https://sites.google.com/view/tecas-egmont/training

22/02/2022

See my new Website https://sites.google.com/view/tecas-egmont

22/06/2019

TECAS celebrates its 15th anniversary this year. Thank you to all my customers for the challenge with each project.

06/10/2014

TECAS is starting now the eleventh Year.

19/02/2013

Fotos von Egmont Schleich TECAS Technology Assistance

19/11/2010

In this Video you can see the Simulation about milling and turning a crankshaft on a BOST T4F.
The Simulation was made with VERICUT software by TECAS. The Control is a Siemens 840D. See also www.tecas.eu or www.tecas.at

Share your videos with friends, family, and the world

Adresse

Steilweg 29
Stattegg
8046

Telefon

0043 316 776 713

Website

http://www.tecas.eu/

Benachrichtigungen

Erfahren Sie als Erste/r von Neuigkeiten und Aktionen: Wir schicken Ihnen eine E-Mail, wenn TECAS Technology-Assistance etwas veröffentlicht. Ihre E-Mail-Adresse wird für keinen anderen Zweck verwendet, und Sie können sich jederzeit abmelden.