Sino Purchasers Ltd

05/02/2020

2017; Sino Purchasers Ltd has been, and still is loading containers of mixed Bathroom products. That’s over 10 years of supplying regular container loads of mixed bathroom products including Vanity Cabinets, Acrylic & Ceramic basins, Shower Enclosures, & Trays, Baths, SS Bathroom Accessories, Heated Towel Racks, SS Shower Trays.
Containers going out on average every 6 weeks to Australia.
Over the years we have seen a few changes in preferred designs as well retooled a number of our own design shower bases and acrylic vanity tops to suit new styles required, thus overcoming the continuing issues with irregular quality of the Ceramic tops.
Thanks to the hard working Sino Purchasers staff, who have inspected every single container loading for the last 10 years !!!

04/02/2020

2013 – 2015 Manufacture of
• Temporary Power Boxes both, three & single phase, for commercial building sites.
• Metal Load Centre’s for industrial sites.
• Specialist Extreme Load Centre Boxes for use in Northern Australian mine sites.
Fabricated Boxes requiring Powder coating to 126 microns with high UV resistance to tolerance the harsh environment, all boxes produced and tested to IP66 rating.
Sino Purchasers increasing its China based team with Expat Electrical engineers and onsite QC managers to ensure all orders met the strict tolerances and assembly prior to shipping.
From the initial client drawings & designs then prototype samples made, to full production and first full container finished, the time taken was only 3 weeks.
This enabling loading just 2 days prior to the Chinese New Year’s holidays to meet the client’s tight deadline. A fantastic job done by the Sino team with our partner suppliers, finishing off a very hectic 2013.

04/02/2020

2012 Full house fit-outs x 10 ; Starting with a list and pictures of designer furniture’s, with the floor plans of the houses, Sino Purchasers supplied complete house fit-outs for 10 display homes in Qld. From the main furniture’s, beds, tables, outdoor settings, through to wall hangings, floor rugs and vases, all goods consolidated and send out in 2 full containers ready to unload at the newly built houses.

04/02/2020

2010, SS Wire Rope & Accessories Supply Update ; Regular Shipments being sent to Italy of SS Rope 8 & 10 mm with Accessories including ; Stainless Steel Wire Rope Clips aisi 316, Stainless Steel Italian Type Thimble aisi 316 all with CE.
With close cooperation with our factories we can supply Stainless Steel wire rope and cable, steel rope, steel wire Un-galvanized and Galvanized wire rope and Elevator wire rope. Other rigging hardware including, shackles, wire rope clips, ringer, turn buckles, snap hooks, swivel, pulley, terminals, ship-rigged hardware, round ring, eye bolts, eye screws.
Products manufactured according to the International Standards such as GB, ISO, ASTM, API, MIL, EN, DIN, BS, JIS etc.
BTB Trading Co Italy nominated as the Sole Distributors in Italy, for Sino Purchasers Ltd, for SS Wire Rope and Accessories. Goods successfully passed all EU testings and approved for Italy Building requirements.
For purchases in Italy inquires, contact Flamino Tacconi at BTB Trading Co.

04/02/2020

2008 – 2010, Marine parts Supply, Stampings & Castings ; Sino Purchasers partnered with our preferred factories supplied multiple types of SS and aluminium metal parts to
Caudwell Marine in South Africa for use with its prototype Marine project.
Parts included SS Stampings, Die Castings, Investment & gravity castings, finished in a combination of raw castings and fully machined units;
The SS stampings were produced, utilising cold drawing techniques and finished to a highly polished look for display purposes. Over 10 tools made for the first run of samples.
Multiple different pressings in 316 stainless steel material, with material thicknesses varied between 1.6mm & 4.5mm, sizes 600mm x 400mm with various curves. These pressings used in an assembly
that, as well as being structural, required look good, with a highly polished finish.
Stamping parts being SS Exhaust Manifold Stampings, (Inner and outer manifolds) and complete marine housing covers.
The high end SS machining’s, had both with internal and external machining’s, with low tolerances for oil capillaries with internal and external splines

04/02/2020

2009, Insulation R 3.5 Batts supplied to Australia ; Due the Australian Government Insulation Rebate Scheme, Sino Purchasers shipped out over 50 containers of good quality R3.5 Rated insulation Batts, all made to Australian standards AS/NZ 4859.1 and supplied to many different Australian importers.
The demand had been crazy with factories actually selling out other buyer’s orders to the highest bidders, just prior to original shipping.
Prices sky rocketed as demand was higher that could be supplied. Overnight new factories sprung up putting together orders made from scrap seconds, from larger factories offcuts.
Sino Purchasers could only supply our orders successfully by keeping our own people on the ground at the factories and quality checking every production through to loading, then clearance.

04/02/2020

2008 bathroom Vanity Units supply ; Now past the second year of Sino Purchasers regular Bathroom Vanity Cabinet containers loaded and sent out to Australia.
Working between a number of cabinet factories we have refined the production processes, enabling better QC methods, meaning less down time prior to loading. The ceramic and acrylic basins from alternate factories fully checked for fitment on the cabinets prior to packing. 2006 the start of mixed container shipments of bathroom product supplies.

03/02/2020

2008 "Toplegs" exercise device production stage 1: EU Award winning design, “Toplegs”, has moved from our initial prototypes, to the plastic injection tooling completed, with full production of the complete assembled and packaged plastic exercise machine, “Toplegs’ for our Italian clients underway.
For this project, the manufacture of 10 new plastic injection tools was completed, with our investment purchase of plastic welding machinery for the assembly, plus set-of a specific glycerin / water mix
injection system during assemble (enabling the required rocking motion) for The Toplegs product

03/02/2020

2007 - 2008 Spirit Boiler Kits; From Clients basic urn, and lid setup, with a penciled design outline, Sino Purchasers have gone through redesigning, prototyping, testing through to first production runs, prior to now multiple containers sent out to Australia. The “Beer Me” 30 Litre Distilling kits required totally new designed SS Stamped lids with food grade rubber seals, while the sealing system needing to withstand the high pressures required during the distilling process.
Improved Australian standards elements added to the units with the electrical cutouts adjusted for brewing to the higher temps.
Six months of development and testing completed prior to the first full production runs. All Boiler Urn Units 100 % pressure tested prior to leaving China.
Packed with accessories, and heavy-duty polystyrene for the Australian Clients local couriers multiple containers now sending out. Secondary product was the addition of a SS matching Alcohol filter set, this a carbon filter drain system using a replacement pure carbon hollow block system. Developed by Sino Purchasers from another basic design sketch, through to prototypes and full production, matching the successful Distill kits.
Sino suppling full range of added Brewing consumables, and accessories including Alco and Hydro Meters, machined brass fittings, taps and jugs etc.

29/01/2020

29/01/2020