Aztech Cutting Solutions

Call Directions Website Contact the business

Aztech Cutting Solutions Australia’s waterjet cutting specialists. 18+ years handling complex jobs across Victoria. Real machinery. Real capability.

↓ Send us your next challenge

Waterjet cutting is one of the world's most versatile and accurate cutting processes out there. Using only high pressure water mixed with a fine abrasive, we are able to cut through almost any material up to 150mm thick. As this is a cold cutting process, there is not heat effected area's or distortion of materials. We are able to minimize material wasted, as we are able to nest parts closer together than conventional laser and plasma cutting processes. Not only do we cater for your one off prototyping jobs, we can also handle large production runs. We pride ourselves on maintaining the highest quality standards and having a quick turnaround time, as we are very aware that time is money. For further information please head to our website at www.aztechcuttingsolutions.com.au or alternatively drop us a line on
(03) 8339 0516.

18/10/2026

Two materials. One very recognisable logo.

6mm brass and 12mm aluminium precision cut for Metricon Homes, with clean profiles and sharp detail across both materials.

From one-off branding pieces to repeat architectural components, send us the drawing and we’ll work out the right way to cut it.

15/10/2026

36mm wall. Round section. Tight access.

Exactly the kind of job where the cutting method matters.

This 20MNv6 steel tube was cut cleanly on the waterjet, with the process chosen around the material and the geometry.

Awkward profile? Heavy wall? Send it through.

13/10/2026

Astroturf to stainless steel. Just another week on the cutting beds.

Mixed-material signage, aluminium, vinyl and everything in between.

Different materials. Different briefs. Same precision.

Got something unusual that needs cutting? Send it our way.

11/10/2026

10mm porcelain. One repeated pattern. Zero room for drift.

Waterjet gives us the control to keep every perforation consistent across the panel.

Detailed. Repeatable. Clean.

Send us the drawings.

08/10/2026

20 metres of 2 mm vinyl.

Unrolled, stacked and cut into tiles in one streamlined process.

For repetitive production work, stacking material can make the cutting process faster and more efficient while keeping the finished pieces consistent.

Simple job on paper. Very satisfying to watch.

Got volume cutting? Send it our way.

A cutting job is rarely just about the cut.It’s the file prep, material handling, tolerances and knowing the best way to...
06/10/2026

A cutting job is rarely just about the cut.

It’s the file prep, material handling, tolerances and knowing the best way to approach the job from the start.

From brief through to finished part, we help manage the process and keep things moving.

Send us your brief. We’ll work out the best way to get it done.

04/10/2026

30 hours of cutting. Two plates.

16mm SS304 with every slot cut on a 5° bevel and every hole countersunk.

15 hours on the waterjet per plate.

Detailed work. Repeated accurately across the whole job.

Got a technical cut? Send it through.

01/10/2026

Many people have used one. Very few have seen inside one.

These pH sensors were sectioned lengthwise to expose the internal construction. One of those jobs that shows exactly why waterjet comes into its own when the material mix gets unusual.

What should we cut open next?

30/09/2026

📢 NOW HIRING – Aztech Stone

Aztech Stone is expanding, and we're looking for reliable, hardworking people to join our team at our Dandenong South branch.

Roles available:
• Stone Fabricators: cutting, polishing and finishing premium surfaces
• Installers: delivering and fitting benchtops on-site to a high standard
• Machine Operators: running CNC bridge saws & waterjets
• Labourers: supporting the workshop and install crews

What we offer:
• Competitive hourly pay based on your experience
• Full-time, Mon–Fri with regular overtime work available
• Work on high-end residential and commercial projects
• A family-run business where your work is noticed
• On the job training and a path to grow within the company

What we're after: a strong work ethic, attention to detail, and pride in quality.

Driver's licence required for installers.

To apply, send your resume to [email protected] or message this page.

Know someone who'd be a great fit? Tag them below..

Address

45a Lara Way
Melbourne, VIC
3061

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+61383390516

Website

Alerts

Be the first to know and let us send you an email when Aztech Cutting Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Aztech Cutting Solutions:

Shortcuts

Share