MAG Welding Services PTY LTD

18/07/2026

Congratulations team MAG Welding Services, Ned can now add Art sculpturist to his list of fine accompliments

18/07/2026

https://citynews.com.au/2026/giant-murray-cod-sculpture-arrives-in-tuggeranong/
Graeme Taylor and Ned Martin from Metal fabricators to art sculptures, Manufacture of a 4mt Murray cod, now delivered to the ACT Arts Tuggeronong

A giant four-metre steel Murray cod, was installed at Tuggeranong Arts Centre on Friday, launching a collaborative project culminating in a lakeside artwork at November’s Craft + Design Canberra Festival, writes arts editor HELEN MUSA.

28/06/2026

BEST in specialtyTrade Australian trades small business champion awards 2026

27/06/2026

WINNER best specialty trade in Australia Congratulations team MAG welding services at the Australian Trades small buisness champion awards 2026

23/06/2026

Manufacture, powdercoat safety yellow and install removable bollard
Martina St, Narrabundah

23/06/2026

external stairs handrails (8.5mtrs)
- Demolish existing coppers log chain handrail on bottom stairs left
side.
- Replace with new 32nb gal single rail railing.
- Concrete new posts in.
- Approx. 4m long.
- Gal finish only.
- Demolish existing coppers log chain handrail on top right-side
stairs.
- Replace with new 32nb gal single rail railing.
- Concrete new posts in.
- Approx. 4m long.
- Gal finish only.
- Dispose of old materials.

23/06/2026

Manufacture and install of Sportsgrounds steel coat hooks as
per previous design.
1. Change rooms # 1 and 2.
• Manufacture 28m of steel coat hooks.
• 50 x 6 flat bar.
• 12mm diameter hooks.
• Powder coated BLACK.
• Installed on site.
2. Umpires room.
• As above.
• 2.4m of coat hooks.
• Installed on site.

23/06/2026

Manufacture, paint black and installation of 2 x multi toilet roll holders at the local toilet block

23/06/2026

Re-fit heavy toe rail (approx. 5m long) that has been unbolted from top galvanized platform, supply and install 10 x new 12mm
galvanized bolts, Tak weld all 16 x new bolts and existing
bolts so vandals cant take bolts out

23/06/2026

Remove large tray approx. 2.5m wide x 3.7m long that has been
damaged in accident
• Manufacture new tray same as original (includes rear underun
frame)
• Fit hardwood timber same as original
• Royans to pain tray
• Royans to supply new taillight
• Re-fit tray + glass carry ‘’A’’ frame back to truck
• 1 x new rear left side alloy mudguard
• Remove damaged glass frame front left side only + replace with
new
• Remove + replace all damaged glass carry frame Horizontal strutt
beams
• Remove + replace bottom cord on left side of glass ‘’A’’ frame
4 x lift truck transport