Thompson Meat Machinery

Thompson Meat Machinery Manufacturing high-quality meat processing equipment, including grinders/mincers, mixers, and more.

At Thompson Meat Machinery, we are proud to manufacture and distribute our high-quality meat processing equipment worldwide. From our state-of-the-art facility, we design, fabricate, and ship our products to customers across the globe, providing them with the top-of-the-line machinery they need to succeed. With our extensive network and worldwide distribution capabilities, you can trust us to deli

ver exceptional products no matter where you are. Choose us as your global manufacturing partner, and take your meat processing business to new heights.

Clear texture.Clean definition.Consistent results.That’s what Thompson machines are built to deliver.Learn more today📩 s...
02/03/2026

Clear texture.
Clean definition.
Consistent results.

That’s what Thompson machines are built to deliver.

Learn more today
📩 [email protected]

25/02/2026

Another 91000 Mixer Grinder installed and commissioned.

Integrated into the line, tested, and handed over ready for production. Good collaboration on site and a smooth result all round.

If you’re planning an upgrade or reviewing capacity, feel free to get in touch.
📩 [email protected]

#91000

Another one off the truck and into production.The Thompson 92500 standing tall, fully installed and ready to move produc...
09/11/2025

Another one off the truck and into production.

The Thompson 92500 standing tall, fully installed and ready to move product.

Always proud seeing our equipment come to life on-site. Appreciation to the crew who made it smooth from start to finish.

#92500

Day 2 at Gulfood Manufacturing Another busy day at Stand  -17, great energy, great conversations, and plenty of interest...
05/11/2025

Day 2 at Gulfood Manufacturing

Another busy day at Stand -17, great energy, great conversations, and plenty of interest in what we do best: building tough, reliable equipment made in Australia.

If you’re at the show, come say hi, we’d love to meet you and show you around the range.

What a week! 👏The Thompson Meat Machinery team just wrapped up an awesome few days at EATS Chicago 2025.Great chats, gre...
03/11/2025

What a week! 👏
The Thompson Meat Machinery team just wrapped up an awesome few days at EATS Chicago 2025.
Great chats, great people, and plenty of laughs along the way.

Huge thanks to everyone who stopped by Booth #3305, we loved catching up and showing what we’ve been working on.
See you all again soon 🇦🇺🇺🇸

Smear compromises product quality.At Thompson we are proud that our machines maintains particle definition at High throu...
13/08/2025

Smear compromises product quality.

At Thompson we are proud that our machines maintains particle definition at High throughput while controlling temperature rise.

The result: consistent lean-to-fat ratio and stable particle structure.

Contact us today to learn more about Why the best meat rooms run Thompson.
[email protected]
+617 3803 6643

30/06/2025

When block integrity matters, the Thompson Frozen Block Pre-Breaker delivers.

For processors handling frozen blocks for production, maintaining particle integrity while maximizing throughput is critical.

The Pre-Breaker processes each frozen block at temperatures as low as -18°C in just 4 seconds, handling up to 8 tonnes per hour, or 20 tonnes per hour when conveyor-fed.

Ideal for processors seeking throughput without compromising meat structure. For more information or to discuss the right solution for your processing needs, contact us at [email protected].

Understanding Paddle Strength:Mixing paddles face intense, cyclical torque, especially when processing frozen blocks, de...
11/06/2025

Understanding Paddle Strength:

Mixing paddles face intense, cyclical torque, especially when processing frozen blocks, dense flanks, or connective tissue. When the paddle structure isn’t properly matched to the product condition or drive output, failure is only a matter of time.

Key Design Factors:
• Larger shaft diameter = reduced torsional twist
• Thicker paddle arms = better flex & shear resistance
• Heavier plate/ribbon = increased deflection control
• Webbing/bracing = improved load distribution

Note: Even reinforced paddles aren’t immune. Jamming, frozen block impact, or high-output drives can exceed material yield or fatigue thresholds, particularly if torque loads concentrate on a single arm.

Common Failure Scenarios:
• Product jammed between paddle & bowl
• Sudden impact from unbroken frozen blocks
• Compression in feed screw channel
• Oversized motor without paddle upgrade

Paddles are designed to share torque not absorb it individually.

⚠️ If you're processing hard, cold, or irregular product, Reassess your paddle design, material spec, and torque pairing.

Considering processing frozen product? Let’s review your processing requirements.
Contact us today.

🌍 See Us at These Trade Shows in 2025We're proud to be exhibiting across 3 continents this year.Join us at FoodTech Qld,...
05/06/2025

🌍 See Us at These Trade Shows in 2025
We're proud to be exhibiting across 3 continents this year.
Join us at FoodTech Qld, AAMP, eats (formerly Process Expo), and Gulfood Manufacturing.

Our team welcomes the opportunity to meet, collaborate, and discuss your processing or equipment requirements.

At Thompson Meat Machinery, we build bandsaws to suit different working environments, from small butcher shops to large-...
03/06/2025

At Thompson Meat Machinery, we build bandsaws to suit different working environments, from small butcher shops to large-scale processors.

Here’s a clear breakdown:

🔹 MK3 Bandsaw
A solid option for butcher shops and supermarket backrooms.

1.5kW motor

Fixed table

Brake motor for safety

Stainless steel wheels with safety edges to reduce slippage

🔹 Thompson 400 Bandsaw
Designed for high-volume production. Widely used by major processors like JBS, Greenham, and Swickers.

3kW high-speed motor

Tilt-up table for easy cleaning and no water residue

Direct drive (no belts)

Safety flanges on wheels to keep blade secure

Foot-operated stop switch for busy hands

Which one you choose depends on how much you're cutting, whether you're working with frozen product, and your cleaning/safety requirements.

If you need help deciding, we’re happy to talk through your setup.

Reliable machines matters when the shop gets busy.The Thompson 20kg and 27kg Hydraulic Fillers are built for butcheries ...
30/05/2025

Reliable machines matters when the shop gets busy.
The Thompson 20kg and 27kg Hydraulic Fillers are built for butcheries that need consistent output, minimal downtime, and easy clean-up between runs.

No jamming. No drama. Just solid performance shift after shift.

Enquire now, ready for shops moving volume without compromising quality.

📞 Get in touch to find the right fit for your workflow.
🔗 tmach.com.au

Address

140 Magnesium Drive
Crestmead, QLD
4132

Opening Hours

Monday 7:30am - 5pm
Tuesday 7:30am - 5pm
Wednesday 7:30am - 5pm
Thursday 7:30am - 5pm
Friday 7:30am - 5pm

Telephone

+61738036643

Alerts

Be the first to know and let us send you an email when Thompson Meat Machinery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thompson Meat Machinery:

Share