Fleximake

14/10/2026

Opening up the building? Cover it before the weather arrives.
Adding a second storey or replacing a roof means exposing what’s underneath. Plan your temporary protection before the first sheet comes off or the first floor goes down.

Fleximake / TarpFactory tarps are made for exactly this:
👉 Link in the comments

✅ Builders floor sheets: cover upper-floor decks to help protect new flooring, ceilings and rooms below
✅ Temporary roof tarps: weather protection during roof removal, repairs and renovations
✅ 260 GSM & 320 GSM options, in sizes up to 21 m
✅ Custom sizes available to suit your project

💡 Installation matters. A waterproof cover is only as good as its fixing. Plan secure tie-down points, water runoff and protection from sharp edges to reduce pooling and damage.

📐 Not sure what you need? Send us your dimensions, site photos and intended use, and we’ll recommend a suitable option.

📍 Pickup available:
NSW Store: Unit 2/36 Holbeche Rd, Arndell Park NSW
VIC Main Office / Factory: 33 Tatterson Rd, Dandenong South VIC

🚚 Australia-wide delivery available
📧 [email protected]

13/10/2026

🌦️ Wet load? Don’t let the weather win. Fleximake’s Lightweight Truck Tarp gives you practical load protection without the bulk of traditional heavy-duty tarps.

✅ 275 GSM RPE, lightweight and flexible for easier handling
✅ Waterproof RPE fabric, designed to keep moisture out
✅ Tear-resistant, with reinforced abrasion zones along both top sides
✅ UV-stabilised, suitable for up to approx. 3 years of outdoor use

🔗 Secure tie-down system:

Heavy-duty D-rings at 1 m intervals along both long edges
Extra D-rings on the short sides for flexible fastening
Dual D-ring rows for easy tarp shortening
10 mm PE rope with stitched end loops

📏 4.9 m × 9 m | 12 m | 15 m | 18 m

💡 Before heading out, check your tarp and securing points. Keep it properly tensioned to reduce flapping and water pooling.

📍 Pickup: Unit 2/36 Holbeche Rd, Arndell Park NSW | 33 Tatterson Rd, Dandenong South VIC
🚚 Australia-wide delivery available.

Cover smarter. Keep moving.

👉 Link in the comments
📧 [email protected]

07/10/2026

⛽ Go further. Carry extra fuel for the journey ahead.

Heading off on a remote 4WD trip, a camping getaway or a day out fishing? Carrying extra fuel gives you more flexibility between fuel stops.

Here are 5 facts about Fleximake fuel bladders 👇

🇦🇺 1. Australian made
We manufacture our fuel bladders right here in Australia.

💪 2. Tough and flexible
Made from fuel-grade TPU material designed for fuel storage.

⛽ 3. More than just diesel
The bladder material is compatible with petrol, diesel, kerosene, Jet A1 and most hydrocarbon fuels. Let us know which fuel you’ll be using when you enquire.

🔩 4. Stainless steel fittings
Our standard SP pillow fuel bladders come with a 1½" filler and cap plus a ½" outlet, and some models also include a 1" breather. All fittings are stainless steel.

📏 5. Custom designs available
Got a tricky space in your vehicle or boat’s kill tank? We can review custom shapes—including V-box styles—and dimensions to suit your space, with your choice of fitting sizes, positions and extra fittings.

📸 Send us a photo of the space and its measurements, and we’ll help you work through the options.

👇 Shop the range via the link in the first comment.

Fuel compatibility refers to the material’s chemical resistance. Customers must ensure their installation, fuel storage and transport meet applicable regulations.

02/10/2026

🏕️ Beach camping, bush tracks or an off-road adventure?

Where has your 4WD taken you this long weekend? 🚙

Out exploring the tracks or parked up at camp with a beautiful view? We’d love to see it!

📸 Drop a photo of your off-road adventure, campsite or 4WD setup in the comments. Tell us where you are—or keep your favourite spot a secret! 😉

Got your Fleximake water or fuel bladder along for the trip? Show us your setup too. 💙

Enjoy the adventure, look after your campsite and travel safely!

01/10/2026

DO YOU REALLY NEED A HIGH-FLOW PUMP?
For a simple 12V water setup, the PWP-06 6L/min pump can handle plenty around camp.
💧 Transfer water from your bladder
🚿 Run a basic camp shower
🪣 Fill bottles, buckets or containers
🧼 Washing up & basic camp cleaning
🚙 Great for smaller 4WD & camping setups

It’s self-priming up to 2m and includes 2 × 90° hose barb fittings, making it easy to connect into your water setup.
💥 Buying a drinking water bladder? Get 15% off the PWP-06 when purchased together.
What would you use yours for — shower, washing, water transfer or something else? 👇 🎣

30/09/2026

✅ WATER ON BOARD? HERE'S AN EASIER WAY TO GET IT OUT.

Save 15% on the PWP-17P when you buy it with a Fleximake drinking water bladder. 👍

The perfect way to complete your 12V water setup. Whether you're camping, touring or travelling with the caravan, the PWP-17P 12V Pressure Water Pump is designed to make getting water from your bladder to the tap simple.

⚡ 12V DC
💦 Up to approx. 17L/min flow
💪 40 PSI auto cut-off
💧 Suction lift up to approx. 2m
🚰 Automatic pressure switch: turn the tap on and the pump starts
🔧 Fittings + filter/strainer included

⚠️ Just remember, it's a one-direction flow pump, so check the arrow on the pump when connecting your inlet and outlet.

🏕️ Camp kitchen, shower, caravan or around camp, where would you use yours? 👇

Travel safer. Pack smarter. Explore further.

29/09/2026

Just got your Fleximake drinking water bladder and wondering how to set it up? 💧

We’ve made a quick video showing how to connect the hoses and fittings, including the breather hose. Remember to open the breather cap when filling the bladder so air can escape.

Watch the video here: https://youtu.be/zn92CaWckHA

If you have any questions about your setup, send us a message. We’re happy to help!

Learn how to set up a Fleximake drinking water bladder with two ½-i...

28/09/2026

Where have you fitted your Fleximake bladder? 🚙💧

Behind the seats, under the deck, in the boat—or somewhere we haven’t thought of? Tell us your setup in the comments. We’d love to see a photo too!

If you already use a Fleximake product, you can also share a photo or leave an honest review to receive $15 off your next purchase. Send us a DM and we’ll help you with the details.

Offer ends 12 October 2026. Full T&Cs are in the pinned comment.

28/09/2026

💧 WHERE WOULD YOU FIT YOUR WATER BLADDER?
Sometimes the best 4WD water storage is in the space you’re not using.
Our DW low-profile drinking water bladders are designed for tight spaces in 4WDs, campers and touring setups.

💧 DW = Drinking Water
📏 40, 55, 85 & 145 = Capacity in litres
🔹 BLP = Low-profile pillow design

Available in 40L, 55L, 85L & 145L.

Where would you use yours? Tell us below 👇
Travel safer. Pack smarter. Explore further.