MAG Welding Services PTY LTD

MAG Welding Services PTY LTD MAG Welding Services PTY LTD

MIG TIG ARC Welding specialists
sheetmetal work
specialising in Aluminium welding
fabrication repairs
gates and fences made to order
modifications to your boat or trailer
heavy machinery repair
general repair work
trailer servicing
urgent breakdown service

And we are off 2026 WINNERS best Metal Fabrication in Canberra we have now taken this award 2024 2025 and 2026 Congratu...
05/06/2026

And we are off 2026 WINNERS best Metal Fabrication in Canberra we have now taken this award 2024 2025 and 2026 Congratulations to our team, 18 staff members and our customers who come back whenever they need assistance with their projects. THANKYOU to all.
Graeme and Jacqueline Taylor

Manufacture and install steel plate ramp to the entrance of your garage for car access1. Supply and cut to size 8mm stee...
02/06/2026

Manufacture and install steel plate ramp to the entrance of your garage for car access
1. Supply and cut to size 8mm steel floor plates ( to be made in 3 x
man handled sections. )
2. 1200mm deep x 3660mm wide. ( 1200 x 1200 each )
3. 25mm gap between plates ( middles section only ) to allow for
water to travel into drainage system.
4. Counter sunk holes ( 3 in each plate ) 14mm for a 12mm
galvanised screw bolt to fix plates to existing concrete slab.
5. Approx. 900mm x 10mm bracing plates on the undersides of
outside plates to stop deflection from car weight.
6. 500mm wide each from centre line of front track of vehicle.
7. Cut notch on site in plate for left side concrete drain to clear.
8. Cut both left and right side existing steel cast drain grates so they
can be removed for cleaning.
9. Zinc prime only ( client to top coat )
works completed by the MAG 1 team

1. Re weld and align broken 50mm stainlesssteel handrail.2. Grind smooth.3. Polish back to match existingworks completed...
02/06/2026

1. Re weld and align broken 50mm stainless
steel handrail.
2. Grind smooth.
3. Polish back to match existing
works completed by the MAG 2 team

Urgent makesafe repair, damaged top left side alloy top ofthe truck that has been struck by fork lift, due to the damage...
02/06/2026

Urgent makesafe repair, damaged top left side alloy top of
the truck that has been struck by fork lift, due to the damage the truck was unable to close the curtins allowing him to only carry half load and lose half his daily deliveries, making safe now he can continue with his deliveries.

Urgent work request ,reweld gas strut bracket back on rear tail lifter door, rear tail gate can now be lifted safetly
02/06/2026

Urgent work request ,reweld gas strut bracket back on rear tail lifter door, rear tail gate can now be lifted safetly

Urgent callout to Monash, EWP Leguan has broken the front left side tie down lug on machine. Grind out crack. Weld both ...
02/06/2026

Urgent callout to Monash, EWP Leguan has broken the front left side tie down lug on machine. Grind out crack. Weld both sides.
Primer weld. works completed by the MAG 8 team

Supply and install 2 x large dropdown landing legs on a large Gov trailer as requested
02/06/2026

Supply and install 2 x large drop
down landing legs on a large Gov trailer as requested

Supply and installation of a rangergate with posts lockboxes and locking pins, works completed by the MAG 7 team
02/06/2026

Supply and installation of a rangergate with posts lockboxes and locking pins, works completed by the MAG 7 team

Cut the top off and re-weld with top rotated through 90 degree (As instructed by Client)
02/06/2026

Cut the top off and re-weld with top rotated through 90 degree (As instructed by Client)

Custom manufacture security lock covers to common area powerpoints due to power theft, manufactured by our fabricators a...
01/06/2026

Custom manufacture security lock covers to common area powerpoints due to power theft, manufactured by our fabricators and installed by the MAG 3 team

Address

5/16 Mildura Street
Canberra, ACT
2609

Opening Hours

Monday 7:30am - 4pm
Tuesday 7:30am - 4pm
Wednesday 7:30am - 4pm
Thursday 7:30am - 4pm
Friday 7:30am - 4pm

Telephone

+61262608992

Website

Alerts

Be the first to know and let us send you an email when MAG Welding Services PTY LTD posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category