Ferro-Clean

25/05/2026

IODS2026: The Indian Ocean Defence & Security Expo kicks off TOMORROW and Ferro-Clean is ready to go! Come visit us at Stand P15 to see how we’re supporting defence and industry with advanced blasting, coating and corrosion prevention solutions.

We’ll be showcasing our capabilities across defence infrastructure, fabricated modules, specialist coatings and surface preparation.

If you haven't already, register here: https://ferroclean.com.au/news/ferro-clean-is-exhibiting-at-the-indian-ocean-defence-security-exhibition/

See you at IODS2026!

IODS2026 Indian Ocean Defence & Security Conference & Exhibition   Register Here Visit IODS Website Exhibition IODS 2026 highlights Western Australia’s pivotal contribution to national defence priorities, from submarine sustainment and continuous naval shipbuilding to the infrastructure supportin...

22/05/2026

4 Days to go! Ferro-Clean is exhibiting at the Indian Ocean Defence & Security Expo at Perth Convention Centre on 26-28th May 2026.
Come and visit us at Stand P15!
Get your free tickets here: https://iods.com.au/registration/
Read more about Ferro-Clean's long history with the Defence Industry in Western Australia: https://ferroclean.com.au/defence-sector/

11/05/2026

Ferro-Clean is exhibiting at IODS26 - Indian Ocean Defence & Security Expo at Perth Convention Centre on 26-28th May 2026.
Come and visit us at Stand P15!

06/05/2026

What is the REAL term for "SAFETY YELLOW"???
You may have heard clients asking for something to be painted in 'Safety Yellow', however this is a generic term that basically means a bright yellow colour that is easy to see.
In Australia, the most commonly used yellow colour is Y14 Golden Yellow (as per Australian Standards AS2700).

Why?
Well, the problem with Yellow paints in particular is they tend to have a lot of tint, which is prone to fading over time, especially when exposed to the suns UV rays for many years. To overcome this, most paint manufacturers will manufacture a 'factory batch' of Y14 yellow, so the paint has more substance and less tint.

What if my existing steelwork looks slightly lighter or darker?
Because Y14 is so common, chances are that the original items were in fact painted in Y14, but have now faded or been soiled to make them appear lighter or darker. The thing is, if you paint your new items in tinted paint - Y15 Sunflower or Y13 Vivid Yellow (the two closest colours to Y14), the new items with the yellow tint will fade faster than the Y14, meaning you'll have two different colours anyway. The best approach is to use Y14 Golden Yellow for any yellow items, so you can have confidence that your Safety Yellow steelwork will remain a nice bright yellow colour.

Looking for a reliable partner for your next blasting, painting, protective coatings, or rubber/ceramic lining project? Let’s talk [email protected] or 0484 674 245

20/04/2026

Choosing the Right Paint — and Preparing the Surface for Success

At Ferro-Clean we understand that in industrial environments, not all paints are created equal.

Selecting the right coating can mean the difference between a surface that lasts years — and one that fails within months.

But just as importantly, even the best paint system will fail without proper surface preparation.

The foundation of every durable coating is clean, well-prepared steel — and that’s where abrasive blasting and inspection make all the difference.
Here’s a quick breakdown of common industrial paint types and where they shine:

🎨 1. Epoxy Coatings

✅ Best for: High-wear areas, chemical plants, pipelines, tanks.
💪 Why: Excellent adhesion, corrosion and chemical resistance.
⚠️ Tip: Avoid UV exposure — they can chalk or fade in sunlight.

🎨 2. Polyurethane Coatings

✅ Best for: Exterior surfaces, structural steel, machinery.
💪 Why: Great UV resistance and color retention.
⚠️ Tip: Use as a topcoat over epoxy for a durable finish.

🎨 3. Zinc-Rich Primers

✅ Best for: Corrosion protection on steel structures.
💪 Why: Provides sacrificial protection similar to galvanizing.
⚠️ Tip: Surface prep (sandblasting!) is crucial for performance.

🎨 4. Acrylic or Alkyd Enamels

✅ Best for: Low-demand, decorative, or interior applications.
💪 Why: Easy to apply, cost-effective.
⚠️ Tip: Not ideal for heavy industrial exposure.

At Ferro-Clean, we know a coating is only as strong as the surface it’s applied to.

That’s why our team focuses on precision sandblasting, surface profiling, and the right coating system for each application.

🧰 The result? Long-lasting protection, performance, and peace of mind.

Looking for a reliable partner for your next blasting, painting, protective coatings, or rubber/ceramic lining project? Let’s talk [email protected] or 0484 674 245

01/04/2026

In the world of protective coatings, the quality of surface preparation makes all the difference.

At Ferro-Clean, we often talk about Class 2.5 and Class 3 sandblasting — but what do these really mean?

Both classes refer to surface cleanliness standards defined by AS 1627.4 / ISO 8501-1, which describe how thoroughly contaminants and coatings are removed before applying new paint or lining systems.

Here’s a simple breakdown 👇

Class 2.5 (Near White Metal Blast Cleaning)
· About 95% of the surface is free from rust, mill scale, and old coatings.
· Only very light stains remain, visible as slight discolouration or
shadows.
· Commonly specified for most industrial coating systems — it provides
excellent adhesion and long-term protection.

Class 3 (White Metal Blast Cleaning)
· 100% of the surface is clean — no visible contaminants or staining.
· Achieves a bright, uniform metallic finish.
· Typically used for high-performance or critical coatings, where
maximum adhesion and durability are essential (e.g. offshore, chemical,
or marine environments).

The difference between 2.5 and 3 may look small to the eye — but in terms of coating performance and cost, it’s significant.

Class 3 requires more time, media, and precision, but it delivers the cleanest possible surface for the toughest jobs.

At Ferro-Clean, we match our blasting class to the project’s needs — ensuring every surface is prepared to the right standard for its environment and coating system.

Looking for a reliable partner for your next blasting, painting, protective coatings, or rubber/ceramic lining project? Let’s talk [email protected] or 0484 674 245

16/03/2026

Strong. Safe. And Surprisingly Stylish.

In any colour you like… as long as it’s yellow. 💛

For almost 60 years, Ferro-Clean has been the trusted name in handrail coatings. We’ve delivered an estimated 2,000 km of painted handrail—and we’re still going strong.

Our finishes don’t just look good—they perform. They’re built to impress end clients, minimise rework, and deliver long-term value you can rely on.

We regularly coat handrails to standards including System Ga, G/2, PI-P1, SKM-G3, or we can recommend the ideal system for your project. A typical setup includes:

🔹 75 μm epoxy primer
🔹 75 μm acrylic or polyurethane yellow topcoat

Applied over galvanised or untreated surfaces.

Thanks to our custom-built production line, we process large volumes at short notice while maintaining industry-leading turnaround times. Every item passes through strict QA inspection—so it’s done right the first time. Plus, we professionally package everything to ensure it’s site-ready when it arrives.

What sets Ferro-Clean apart:

✔ Up to 1,000m of handrail per week, with capacity to double throughput
✔ Designed for mesh guards, bollards, barriers, grating, ladders, crane
beams and more
✔ QA Reports & ITPs supplied with every project
✔ High-volume, repetitive processing = lower cost + faster turnaround
✔ Home to Australia’s largest blasting machine
✔ Separate lines for structural steel, fittings & small components
✔ 4,500m² undercover—no weather delays, ever

If you need a reliable partner for blasting, painting, protective coatings, or rubber/ceramic lining, let’s chat.📩 [email protected] or
📞 0484 674 245

09/03/2026

Many people aren’t aware that Ferro-Clean has extended its industry expertise and great reputation to Rubber and Ceramic Lining.

For over 60 years, Ferro-Clean has built a strong reputation for excellence in surface preparation, sandblasting, and industrial coatings. Our team’s experience, attention to detail, and commitment to quality have made us a trusted partner across a wide range of industries — and now we’ve taken that same standard of excellence into rubber and ceramic lining.

Our lining solutions are designed to protect equipment exposed to harsh wear and corrosive environments. This includes items such as chutes, hoppers, pipes, tanks, launders, cyclones, pumps, and elbows — anywhere that material flow or abrasion occurs. By applying the right rubber or ceramic system for the job, we help ensure longer equipment life, reduced downtime, and improved operational performance.

Whether it’s a small repair or a full refurbishment, our skilled team delivers the same care and precision that Ferro-Clean has been known for over the past six decades.

If you’d like to learn more about how our lining solutions can improve your operation’s performance and longevity, feel free to reach out — we’d love to help.

Let’s connect: [email protected] or 0484 674 245

25/02/2026

Edith Cowan University's $850m CITY CAMPUS opened it's doors this month - Take a look behind the scenes in Ferro-Clean’s latest case study video!

hashtag
hashtag
Michael Pascoe

Note: Some footage courtesy of 7News.

10/02/2026

Ferro-Clean – There’s nothing we can’t do!

We’re excited to be collaborating with a leading client in the mining-equipment manufacturing sector—a company that provides a true one-stop-shop for the mining and resources industries of Western Australia.

Their offerings range from custom-built water trucks, truck trays and service vehicles to full machine rebuilds and refurbishments.

Their purpose-built equipment, including water trucks and support vehicles, is engineered to withstand the harshest mining conditions. With in-house design specialists and manufacturing teams, they ensure every vehicle meets regulatory standards and performs reliably on site.

At Ferro-Clean, we’re proud to contribute our sandblasting and protective coating expertise to their truck tray bodies and water tanks—but with a unique twist: instead of a standard industrial coating, we’re applying an automotive-grade paint finish. This elevated finish delivers enhanced durability, a refined appearance, and ensures the equipment not only performs in extreme conditions but also meets the highest quality standards.

Partnering with a company that values innovation, customization, and reliability makes this collaboration truly dynamic. Together, we’re delivering premium equipment that performs exceptionally on site—and looks outstanding while doing it.

If you’re seeking a trusted partner for blasting, painting, protective coatings, or rubber/ceramic lining projects, let’s connect: [email protected]
or 0484 674 245