Rapide Resources

08/06/2026

It is the same down here in Australia, production output goes thru the roof.

We have had the Cosmo robot sander for a week now and we are extremely impressed! It has increased our productivity by approximately 50% and does it with impeccable quality! I recommend to everyone needing large capacity sanding on cabinet doors to get this machine! You won’t regret it!

06/05/2026

No roadblocks , doors keep moving, why rack and stop when you can turn them over quickly.

Different shops. Same sanding problem. One partner.

Here's how Stolbek fits across four types of production:

🔹 Cabinet manufacturers — The Cosmo SC automates your door and panel line. Faces, edges, and corner breaks in one cell. Your sanding station stops being the chokepoint.

🔹 Custom furniture shops — Can't recruit sanders? Can't afford inconsistent quality on custom work? The Cosmo SC or Cosmo XL handles the sanding so your skilled people can focus on what actually needs a human.

🔹 Millwork and door manufacturers — Consistency across profiles and styles. The Cosmo Slide paired with the Ultimate Edge Sander covers large-format panels and edges in one automated workflow.

🔹 Kitchen and closet producers — When volume exceeds manual capacity, the Cosmo SC and Ultimate Edge Sander running together handle the full door workflow — face sanding, edge sanding, corner breaks, all of it.

One partner. Whatever your shop builds.

→ Find a dealer near you: stolbek.ca/dealers

06/05/2026

Pantry doors as well....awesome

Some cabinet components don't fit a standard robotic cell. Oversized door panels. Wide slab doors. Large cabinet components that still need to come off the line perfectly consistent.

That's what the Cosmo XL was built for.

Gantry-mounted Yaskawa robot. Extended reach for oversized panels. Same turnkey simplicity as the Cosmo SC — no integrators, no custom programming, load it and run it.

And like every Stolbek system: it sands edges, breaks corners, and handles face sanding. In one system. Most robotic sanders on the market stop at face sanding and leave your operators finishing edges by hand on every oversized component. We eliminate that step entirely.

Built for high-volume production. Built for shops that can't afford inconsistency on their biggest pieces.

→ Request a Demo: stolbek.ca/contact

06/05/2026

A HUGE thank you to the the Warrandyte Lions Club for their generous donation of $2,000 to The Pettet Foundation.

At a time when we are seeing a significant increase in applications from families doing it tough, this contribution will go a long way in helping us provide immediate, practical support to a number of families in crisis.

Thank you! 🩵

06/05/2026

Ain't that the truth

There's a gap in most "automated" sanding setups that nobody talks about.

Most robotic sanders on the market sand faces. That's it. Your operators are still hand-sanding edges and breaking corners on every single door after the robot touches it.

Is that really automated? Or is it just automating the easy part and leaving the tedious part to your people?

Stolbek builds the only robotic sanding system that handles edges, corner breaks, AND face sanding in one turnkey cell. The Cosmo SC doesn't hand the door back to an operator halfway through.

If your shop has a robotic sander and someone is still finishing edges by hand — you've got half the solution. The other half is right here.

→ See it in action: stolbek.ca/robotic-sanding-machines/cosmo-sc

03/03/2026

02/03/2026

Get your order in now, major installs happening in first half of 2026, maybe just up on the next street.

27/02/2026

Stolbek Edge Sanders, used by the best MDF Door Manufacturers in Canada, Are you ready Australia.