Ontime Locksmiths and Security Systems

Ontime Locksmiths and Security Systems Servicing the Far North Coast of NSW for almost the past 10 years, we specialise in all your lock, key and security system needs. Give us a call today.

11/04/2024

Locksmith Apprenticeship (Position Vacant)
Ontime Locksmiths & Security Systems is looking for an enthusiastic, professional and friendly person to join our team on a Full-Time basis in Mullumbimby NSW.
Please apply if you are:
Looking to start your career in the Locksmithing industry as a full-time Locksmith Apprentice (4 years).
Ontime Locksmiths and Security is a well-established company, based in the Byron Shire of NSW servicing various locations. Dealing with domestic and commercial clientele.
Role and Responsibilities:
As an apprentice you will be required to attend TAFE QLD at Eagle Farm as per study block assigned by Tafe QLD and follow all TAFE requirements and responsibilities to obtain a Cert III in Locksmithing.
Role will also include:
Work within a workshop environment serving domestic and commercial clients in a face to face and telephone manner.
Follow clientele Induction, WHS, onsite rules and obligations.
Follow instructions set by Tradesman.
Arrive to work on time.
Always arrive to work well presented in full uniform and well groomed.
Must be polite and well mannered.
Will be able to retain technical information.
Work in a safe manner at all times. Following Ontime Locksmiths & Security WHS methods and guidelines.
Will be able to exercise discretion within their level of skills and training.
Must be able to communicate essential information via Data entry, hand-written notes, telephone and face to face.
Requirements:
• Able to obtain a NSW Security License
• Able to attend TAFE QLD Cert III in Locksmithing At TAFE QLD as part of the apprenticeship
• Valid clean NSW Police check
• Manual drivers license
• White Card

Essential Skills:
• A can-do attitude
• Have a medium level understanding of computer skills for the use of security software programs including but not limited too automotive and restricted key databases.

For further information about this position or the Company, please contact Matt Debord 0499630517

A customer pulled these out and asked us to fit them. The customer has had them since back when lockwood products were m...
13/08/2020

A customer pulled these out and asked us to fit them. The customer has had them since back when lockwood products were made in Australia.. We wish the still were.

Big thanks to Print Spot at Murbah for getting our 2nd van done today. We love the great work they do.
17/07/2020

Big thanks to Print Spot at Murbah for getting our 2nd van done today. We love the great work they do.

We have got your covered. From small Domestic to large Commercial CCTV systems we only use high quality equipment to ach...
01/05/2020

We have got your covered. From small Domestic to large Commercial CCTV systems we only use high quality equipment to achieve the best results. This camera system is set up at Tower's Mini Storage in Mullumbimby and gives a high resolution picture of the entire storage facility. Contact us today to find out what we can do for you.

Unique lock fitting - One of our clients requested us to fit this modern style mortice lock in replacement for an existi...
15/11/2019

Unique lock fitting - One of our clients requested us to fit this modern style mortice lock in replacement for an existing lever set and deadlock. It has modern functions allowing users to enter with either fingerprint, pin code or RFID cards. It also has a unique mechanism in which you push the handle from the outside or pull the handle from the inside to open the door. The Kaadas K7 lock also covered any existing holes in the door meaning no patching or repairs to the door were required to upgrade to a more modern style lock. Keep an eye out for more posts on unique lock set-ups.

Interior
21/02/2019

Interior

18/02/2019

We're fully equipped with the lastest machines to get the job done. Modern Car Keys contain transponders which prevent theives from stealing cars as easy as it was in the past. Specialised equipment is required in order to cut and program these types of keys. Watch a high security key being cut below!

LOOK OUT FOR THE BIG BLUE PADLOCK
18/02/2019

LOOK OUT FOR THE BIG BLUE PADLOCK

Come see us in our new workshop premises -  we are now located in Towers Drive Industrial estate. For all your key and s...
18/02/2019

Come see us in our new workshop premises - we are now located in Towers Drive Industrial estate. For all your key and security needs pop in between 8:30am - 4:30pm Monday to Friday, for the best service on the North Coast!

Address

Mullumbimby, NSW
2482

Opening Hours

Monday 8:30am - 4:30pm
Tuesday 8:30am - 4:30pm
Wednesday 8:30am - 4:30pm
Thursday 8:30am - 4:30pm
Friday 8:30am - 4:30pm

Telephone

0266804956

Alerts

Be the first to know and let us send you an email when Ontime Locksmiths and Security Systems posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Ontime Locksmiths and Security Systems:

Share