679style

679style Custom fabrication,
Metal shaping. Restoration & Repair
Floors, tunnels & firewalls. Chassis work

Custom built Cars and Parts, Queensland Australia, new & old stock. Patch panels, rust repairs and general mechanical & wiring services

New merchandise is arriving soon. Show of hands if you’d consider placing an order. I have invested considerable effort ...
29/03/2026

New merchandise is arriving soon. Show of hands if you’d consider placing an order.

I have invested considerable effort into these designs, hoping to receive more orders, as this is an entirely new style for our merchandise and I am quite pleased with it.

Some garments may not appeal to everyone's taste, but I believe there is a little something for everyone in the designs provided.

All orders are greatly appreciated and will assist me significantly. Each order will come with a complimentary sticker pack and free postage.

All proceeds will aid in completing one of my personal projects and provide me with the opportunity to drive on the track again. I will be taking pre-orders shortly, as I do not want to repeat the past where I ordered a large quantity of items in various sizes at my own expense and ended up with odd items that did not fit myself or anyone I know left packaged in my cupboard and eventually used as rags haha.

Some progress on me of my personal builds.Worlds first 6 door Colorado, stupid I know, but I like to push the boundaries...
22/03/2026

Some progress on me of my personal builds.
Worlds first 6 door Colorado, stupid I know, but I like to push the boundaries on “you cant”.

Currently 4x4 RG Colorado, soon to be 2x4 pre runner.
Purchased a 2016 RG Colorado dual cab, then purchased a complete 2022 Rg Colorado extra cab, began cutting things apart and joining the dots.

Two completely mint chassis cut in odd half’s.

Cut the dual cab ex amount longer than the centre line,
Cut the extra cab chassis ex amount longer than the centre line and joined the two longer halves of chassis together.

This resulting in a 6.5m super truck!
Cut a standard dual cab tub up, extended that also.
Have began remaking the tub floor with standard notching and ridges,
Have relocated the rear tub wall that sits closest to the bodies rear firewall, and will be hand making both tub skins to be 100mm wider each side with a new arch shape to accommodate the 37x12” wheels I purchased.

Remade and moved all tub / body mounts.
Car still runs, does all it should.
Waiting to locate a decent GU patrol rear diff, an 8 Speed auto BMW gearbox which I’ll have manualised by Leeson Engineering and Fabrication & 8speed Au.

With the front end I’ve been fortunate enough to build a long distance friendship with Morgan Clarke from MCD1 Fabrications in America and I’ll be picking his brains to design a one off set of billet hubs as well as upper and lower control arms, he’ll also be giving me a tonne of suggestions on suspension geometry’s, arm design and lengths and over all chassis setup in order to be able to Pre run this big sucker down K'gari - Fraser Island at ridiculous speeds.

This truck will run a full chromoly roll cage, 6 bucket seats, 180degree turned centre seats so all rear passengers face one another, we’ll be running inbuilt headsets for conversation, buggy whips, and the full catalogue from stedi lights!

A massive thanks to all who’ve gotten involved especially Ampol Australia with the support they’ve shown my riding over the past year.

This started out as a wild idea between myself and one of my best mates while we got stuck on Stockton Beach for 6.5 hours in 5 story sand dunes!

Looking forward to getting this done, and if you think it’s unachievable just know I built a 6 door, 7 meter bumpside F100

BOOKINGS AVAILABLE, Discounted rates available until the end april whilst im amidst renovations.Hey guys, workshops open...
22/03/2026

BOOKINGS AVAILABLE, Discounted rates available until the end april whilst im amidst renovations.

Hey guys, workshops open once again and taking bookings until December.

At present im mainly looking to book some smaller in and out jobs just to get the workflow back on track.

Shop has been closed for just shy of four months while I’ve been moving into another premises, downsizing from two workshops into one. Also had a large break from work due to my mental health not being at its best.

I pride myself on being honest first and foremost but also on doing the best work I physically can, so due to my headspace not being at it’s finest form I took a solid break from work because I didn’t feel like I was capable of doing my best quality work wise, unfortunate of course but just a part of life I suppose.

Anyhow I’ve taken some steps to get my head better, feel a whole lot more like myself and am once again ready to kick some ass and pump some jobs out!

Shoot us message via Facebook

A big warm welcome to Danny Ceebs the new manager at Danny has been a great friend of mine for over ten years and will ...
20/12/2025

A big warm welcome to Danny Ceebs the new manager at

Danny has been a great friend of mine for over ten years and will be joining the team here from Monday, all questions, queries, estimates and bookings will be handled by him, Dan is a super professional and highly intelligent young man, hard working, kind and has a personality that could light up a room!

I’d like to say a huge thanks to him for continuing to push me to higher grounds throughout all our years of friendship and look forward to seeing where his assistance and dedication to the team can take us!

He also has a killer 180sx and can steer like a little weapon.
Thanks little D, 2026 is our year!

Wild year ahead
19/12/2025

Wild year ahead

👌🏻
19/12/2025

👌🏻

Bookings available now!Mig, tig and oxy welding. Heavy duty and light fabrication.Industrial and architectural fabricati...
16/12/2025

Bookings available now!

Mig, tig and oxy welding.
Heavy duty and light fabrication.
Industrial and architectural fabrication.
Art pieces & sculptures.

Custom trays, airboxes, snorkels, trays, tubs & exhausts
Cage & tubular bar work.
Race car fabrication.
Fuel systems,
Centre consoles, dashes, trims and upholstery,
Custom body kits, body kit repair & fiberglass.
Custom hoods, body work, restoration, rust repairs.
Shipped patch panels and repairs,

If it’s metal and you need it contact us immediately.

Staff wanted:
Positions available:

Office staff.
Book keeper.
Fabricator x2
Panel be**er x 2
Painter.
Mechanic,
General Labor.

$30-65ph depending on capabilities,
Flexible hours, overtime available.

Located in Noosa Queensland,

Don’t wanna hear woulda coulda shoulda, wishin yada yada, if you’re keen to work I’m keen to have you!

Coffee, kitchen, bathroom & shower.
Night work available.

Don’t sleep on the opportunity to kick start your dream life.

Wanna build another x series Ute
16/12/2025

Wanna build another x series Ute

Address

Noosaville, QLD
4566

Opening Hours

Monday 6am - 8pm
Tuesday 7am - 8pm
Wednesday 7am - 8pm
Thursday 7am - 8pm
Friday 7am - 8pm
Saturday 7am - 5pm

Telephone

+61491924038

Website

Alerts

Be the first to know and let us send you an email when 679style posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share