Diverse Laser

07/10/2026

Looking for another team member.....

15/06/2026

🔥 20mm HA350? No Problem. 🔥

Fresh off the laser today – a 700mm diameter sprocket cut from 20mm HA350 high-strength steel.

This is where a quality fibre laser really shines. Despite the material thickness, the cut quality is clean, accurate and ready for fabrication with minimal finishing required.

✅ 20mm HA350 Plate
✅ 710mm Diameter
✅ Precision Laser Cut
✅ Tight Tolerances
✅ Australian Steel

Whether it's one-off components, heavy machinery parts, wear plates, brackets, gussets or production runs, we can process thick plate with accuracy and repeatability.

Diverse Laser
📍 Coffs Coast, NSW
⚡ Laser Cutting • Folding • Engraving • Fabrication Support

Need heavy plate cut? Get in touch and let's see what we can make happen.



20mm thick steel doesn't care about excuses. It only cares whether the laser has had its coffee yet. 😎

31/05/2026

🎯 FREE DART PERSONALISATION – JUNE ONLY 🎯

We had a bit of fun in the workshop today and personalised a set of Phil Taylor Power GX2 darts on our LF30W Fibre Laser.

The engraving shown is only 1-2mm high on an oval scallop measuring approximately 7mm x 3mm, proving just how much detail can be achieved with fibre laser marking.

To celebrate, we're offering FREE personalisation on ONE set of darts per person during June.

✅ Up to 3 darts
✅ One name or one word per dart
✅ Small text similar to the examples shown
✅ Fibre laser marked in-house at Diverse Laser
✅ No charge during June

Whether it's your name, nickname, team name, lucky number, "180", "BK2.0", or something that makes your mates jealous at the oche, we'll see what we can fit.

Drop your darts into the workshop or send us a message to arrange a time.

Diverse Laser
📍 North Boambee Valley, NSW
📩 Message the page to book your free engraving

Because every dart player knows... if your darts are personalised, the 26s somehow hurt less. 😆🎯

#180

30/04/2026

🔥 Custom Stainless Done Right 🔥

This one’s a tidy bit of work from the team — a laser cut & folded stainless steel sink, all knocked out in-house.
Looks simple sitting there… but don’t be fooled.
This job took 15 separate folds and a proper game plan to get the order right. Get one fold wrong and suddenly you’ve made modern art instead of a sink 😅
Big shoutout to Steve, who’s been with us just under 12 months.
In that time he’s gone from learning the ropes to handling jobs like this — where accuracy, sequencing, and experience actually matter (not just “send it and hope”).
This is exactly the kind of work where planning meets skill — and when it comes together first go, it’s a good day in the shed.
💥 Laser cutting
💥 Precision folding
💥 Real-world problem solving
That’s how we like it

24/04/2026

🔥 Custom Laser Etched Rocker Covers 🔥

These gloss black powder coated rocker covers came to us ready for the final touch — and we’ve etched the PPM – Proven Performance Motors logo straight through the coating for that crisp, high-contrast finish.

No stickers.
No peeling.
Just clean, permanent engraving that’ll outlast the engine it bolts onto.

Big fan of how these turned out — simple, tough, and exactly how it should look under the bonnet.

Got something you want to make stand out?
We can help with that. 👊

31/03/2026

🚲 Rode the bikes to work today…

Not because of fuel prices…
Not because we’re suddenly fitness influencers…

Just figured we’d remind ourselves we can still move without a forklift 😅

Fresh air, clear head, and still cutting steel by 8am.

Diverse Laser – powered by lasers… and occasionally legs 💪

30/03/2026

Always good to see the finished product out in the wild 👌

Customer dropped in to show us how this headboard turned out after install… and safe to say it came up mint.

Cut from 3mm aluminium, designed and laser cut in-house, then finished off with powdercoat and fit-up.

Nice clean look, solid build, and practical touches like the D-ring tie points ready to go.

We work closely with local fabricators and businesses to supply parts like this, ready for finishing and install.

Nothing better than seeing it all come together 👍

24/03/2026

Custom Aluminium Headboards – Built Tough

Just finished a couple of custom headboards, designed and cut right here at Diverse Laser.

✔️ 3mm Aluminium
✔️ Fully custom drawn in-house
✔️ Precision laser cut
✔️ Ready for powdercoat or use as-is

One of these also includes aluminium D-ring tie points, nutserted and bolted in – perfect for securing gear or adding practical tie-down points.

We work closely with local fabricators and builders, supplying clean, accurate parts ready for finishing or assembly.

If you’ve got a job that needs to be drawn and cut properly the first time – we can help.

📩 Flick us a message or drop in for a chat.

02/06/2025

👋 We’re Hiring at Diverse Laser!
📍 Coffs Harbour | 🛠️ Full-Time or Casual

We’re on the lookout for a new team member to join us at Diverse Laser!

We need someone to help run our 3KW Fibre Laser and Brake Press (sheet metal bender). No experience? No worries — we’ll provide training to the right person. You just need to be keen to learn, have a good work ethic, and enjoy hands-on work.

🧰 The job includes:
Helping run our laser cutter and brake press

Learning how to read job drawings and prepare jobs

Getting involved in all areas of the workshop over time

Working with a small, friendly team

✅ What we’re looking for:
Someone reliable and switched on

Forklift licence is a must — but we’re happy to help the right person get one if needed

Interest in metalwork, manufacturing, or just making things

Positive attitude and willingness to learn

This is a great opportunity to get into the trade and grow your skills in a supportive environment.

👀 Interested? Know someone who might be?
Send us a message or email [email protected] — we’d love to chat!

14/11/2024

Very excited to announce that we now have a website that includes instant online quoting. Check it out at www.diverselaser.com.au

At Diverse Laser, we specialise in precision laser cutting, folding, and engraving services across a range of materials including stainless steel, mild steel, aluminium, wood, acrylic, and more.