Safetytech Fire Services Pty Ltd

Call Directions Website

Safetytech Fire Services Pty Ltd Safetytech Fire Services is a fully Perth owned and operated commercial Fire Protection company serv

Safetytech Fire Services is a fully Perth owned and operated commercial safety management business. Our key focus is to provide fire safety to commercial properties and businesses, along with general health and safety business management. All of the fire safety services that we provide, abide by the Australia standards; ensuring that your commercial property is always the safest it can be. Whether your are just setting up your business and need guidance, or are an existing business that needs to meet Australian standards, we can advise and assist every step of the way. For more information, please visit our website www.safetytech.net.au or if you would like to contact someone today phone (08) 92 45 17 37 and one of our friendly staff members will be able to assist.

When a fire panel’s power supply starts to fail, it’s not something to put off. ‼️Our team recently completed a power su...
08/10/2026

When a fire panel’s power supply starts to fail, it’s not something to put off. ‼️

Our team recently completed a power supply replacement on a fire panel, addressing the issue and getting the system back to a reliable operating condition.

Following the replacement, the panel was checked and tested to confirm everything was functioning correctly.

It’s one of those components that can easily go unnoticed — until there’s a problem. Addressing faults early helps keep the system operating as it should when it matters most.

Need a fire system inspected, maintained or repaired?
Get in touch with Safetytech on (08) 9444 9877 or visit safetytech.net.au 📱☎️

As part of a recent inspection, several smoke detectors were identified as dirty and faulty, potentially affecting the r...
15/09/2026

As part of a recent inspection, several smoke detectors were identified as dirty and faulty, potentially affecting the reliability of the fire detection system.

Our team replaced the affected detectors and completed testing to confirm the system was operating correctly.

This is a good example of why routine inspection and maintenance matters. Identifying and rectifying faults early helps maintain the reliability and performance of fire detection systems.

Another issue identified, rectified and the system returned to service ✅

Need your fire detection system checked? Get in touch with our team now!

📞 (08) 9444 9877
🌐 safetytech.net.au

Before the weather heats up, it’s worth asking a simple question:If there’s a fire, will your fire water system deliver ...
02/09/2026

Before the weather heats up, it’s worth asking a simple question:

If there’s a fire, will your fire water system deliver what it’s supposed to?

Fire hydrants, booster assemblies, tanks, pumps and associated equipment can sit quietly for months — but when they’re needed, there’s no room for surprises.

A pre-summer check is a good opportunity to look at the basics:

• Hydrant and booster condition
• Water storage levels and tank condition
• Fire pump operation and performance
• Valves, gauges and connections
• Access to hydrants and fire equipment
• Any faults or issues identified during previous testing

Getting these things checked before the hotter months means there’s time to address problems before they become urgent.

Good fire protection starts with knowing your system is ready before you need it.

Need to check where your fire water system is at? Contact us today!
📞 (08) 9444 9877
🌐 safetytech.net.au

Fire extinguishers can look perfectly fine on the outside, but that doesn’t always tell the full story.As part of a rece...
19/08/2026

Fire extinguishers can look perfectly fine on the outside, but that doesn’t always tell the full story.

As part of a recent service, our team completed the 5-yearly pressure testing of the site’s extinguishers. Units that were no longer suitable for continued service were identified and replaced.

It’s one of those maintenance requirements that can easily be overlooked — but making sure extinguishers are tested, serviceable and ready to use is an important part of keeping a fire protection system reliable.

Another site checked, tested and maintained as it should be.

Need your extinguishers checked or due for 5-yearly testing? Get in touch with us! 💯🧯

📞 (08) 9444 9877
🌐 safetytech.net.au

A hydrant system can look fine on the surface, but do you know what happens when part of the ring main needs to be isola...
12/08/2026

A hydrant system can look fine on the surface, but do you know what happens when part of the ring main needs to be isolated?

Isolation valves need to be clearly identified, accessible and shown correctly on the block plan.

During maintenance or a boosted flow test, knowing exactly which section can be isolated saves time and avoids unnecessary disruption to the rest of the system.

Pressure and flow results can also tell you a lot about how the system is performing. A change from previous test results may point to an issue that needs further investigation.

It’s often the small details—valves, plans and test results—that make a big difference when a hydrant system is needed.

Contact us to assess where your hydrant system is at!
📞 (08) 9444 9877
🌐 safetytech.net.au

Completed Callout | Restoring a Booster to Service ✅Our team recently responded to a service call for a leaking fire boo...
05/08/2026

Completed Callout | Restoring a Booster to Service ✅

Our team recently responded to a service call for a leaking fire booster tank. After investigating the issue, we found the pressure gauge was missing, allowing water to escape from the system.

The pressure gauge was replaced, the leak was repaired, and the booster assembly was tested to confirm everything was operating as it should.

It doesn't always take a major fault to affect a fire protection system. Missing or damaged components can lead to unnecessary water loss and reduce system reliability if left unattended. Regular inspections help identify these issues early and keep systems in service.

📞 (08) 9444 9877
🌐 safetytech.net.au

Did you know? 🤔A fire door only works when it's closed.Many people think a fire door is there simply to separate rooms, ...
30/07/2026

Did you know? 🤔

A fire door only works when it's closed.

Many people think a fire door is there simply to separate rooms, but its real purpose is to slow the spread of fire and smoke. Even the highest-rated fire door can lose its effectiveness if it's wedged open or doesn't close properly.

That's why fire doors are fitted with self-closing devices and should never be propped open unless they're connected to an approved fire door release system.

𝗔 𝗽𝗿𝗼𝗽𝗲𝗿𝗹𝘆 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝗶𝗻𝗴 𝗳𝗶𝗿𝗲 𝗱𝗼𝗼𝗿 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘃𝗮𝗹𝘂𝗮𝗯𝗹𝗲 𝘁𝗶𝗺𝗲 𝗱𝘂𝗿𝗶𝗻𝗴 𝗮𝗻 𝗲𝗺𝗲𝗿𝗴𝗲𝗻𝗰𝘆—𝘁𝗶𝗺𝗲 𝘁𝗵𝗮𝘁 𝗰𝗮𝗻 𝗺𝗮𝗸𝗲 𝗮𝗹𝗹 𝘁𝗵𝗲 𝗱𝗶𝗳𝗳𝗲𝗿𝗲𝗻𝗰𝗲.

It's a simple reminder that small habits can have a big impact on building safety 💯

As temperatures drop, heaters, electrical equipment and appliances tend to work a little harder. While they're helping k...
24/07/2026

As temperatures drop, heaters, electrical equipment and appliances tend to work a little harder. While they're helping keep workplaces comfortable, they can also increase the risk of electrical faults if they're not used or maintained properly.

It's also worth remembering that winter weather can take its toll on outdoor fire protection equipment. Moisture, debris and reduced visibility can all affect access to hydrants, hose reels and fire equipment if they're left unchecked.

A few simple checks can make a big difference:
✅ Make sure fire exits and hydrants remain clear and accessible.
✅ Test smoke alarms where required.
✅ Avoid overloading power boards and extension leads.
✅ Keep up with scheduled servicing of your fire protection systems.

Small maintenance tasks today can help prevent bigger issues when they're needed most.

Stay safe this winter! ❄️

Site Update | 𝗗𝘂𝗮𝗹 𝗙𝗶𝗿𝗲 𝗛𝘆𝗱𝗿𝗮𝗻𝘁 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 🔥 Fire protection starts long before an emergency.This recently completed d...
17/07/2026

Site Update | 𝗗𝘂𝗮𝗹 𝗙𝗶𝗿𝗲 𝗛𝘆𝗱𝗿𝗮𝗻𝘁 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 🔥

Fire protection starts long before an emergency.

This recently completed dual fire hydrant installation has been designed to provide dependable water access for firefighting operations while supporting the site's overall fire protection strategy.

From excavation and pipework through to commissioning and testing, every stage of the installation is carried out to ensure the system operates as intended and meets the site's requirements.

It's the kind of work that often goes unnoticed, but it's an essential part of creating safer buildings and helping critical systems perform when they're needed most 🚨

📞 (08) 9444 9877
🌐 www.safetytech.net.au

Another job wrapped up by our team in Forrestdale! 💪This visit involved replacing a faulty sounder control unit and tamp...
13/07/2026

Another job wrapped up by our team in Forrestdale! 💪

This visit involved replacing a faulty sounder control unit and tamper switch to get the fire system back to full working order.

While these components may not always be visible, they play an important role in the overall reliability of a fire protection system. Finding and fixing faults early helps keep equipment operating as intended and reduces the risk of bigger issues down the track.

A great result by the team, and another site ready to go 💯🫡

Need assistance with your fire protection system? Contact Safetytech today!

📞 (08) 9444 9877
🌐 www.safetytech.net.au

Address

Unit 7, 83 Hector Street, Osborne Park
Perth, WA
6017

Telephone

+61892451737

Website

Alerts

Be the first to know and let us send you an email when Safetytech Fire Services Pty Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category