Swift Vermin Control

05/09/2026

Very important to check this !

Almost every stock or chassis I have has need to be clearenced when bedding.

If you place a peice of paper inbetween your bolt and stock (on closing) you will see if it's being restricted from being fully engaged into battery.

Customer sent his action in for a few barrels to be fitted, I cleaned it up and immediately noticed the lug pattern on the receiver abutments is definitely not perpendicular to the raceway.
In other words the bolt is not fully in battery, most likely the handle cut on the stock is not deep enough preventing full lock up.
I’ve seen this many times and once corrected they usually reply… dang this thing now shoots awesome.

03/09/2026

New hauler is 95% done.
Built strong weighing 1.65 tone dry

Both ute and trailer are running there own 12volt system and inverters with solar and a tone of lithium

3 stanless water tanks and ability to carry alot of fuel and water for extended jobs .

The180 awning is impressive which covers a 14m2. Won't stay clean for long 💥

31/08/2026

mop up job tonight on the 🐇 - perfect weather 👌

21/08/2026

Big girl in her natural environment on 🦌 watch !

🔥

21/08/2026

We get to work in some pretty awesome locations — from remote conservation areas and expansive plains country to detailed gardens and suburban sites.

Over the past six months, we’ve been working on a new setup that will give us the ability to operate and stay in remote locations for extended periods.

A lot of thought, planning and hard work has gone into this project to make it as strong, practical and capable as possible.

Hopefully, we’ll have it completed over the next few weeks.
Stay tuned — we’re looking forward to putting it to work! 👊💥

19/08/2026

The benefits of running both thermal and nightvision for confined space work.

1280 thermal working hard against a poor condition-overcast with high humidity.

4k nightvision- unaffected by condition

19/08/2026

Bit of maintenance on the 6br with 1400 rounds under the belt it was in for a re-crown.

18/08/2026

icotec pro inbound

Keen to see how the upgraded speaker /tweeter goes ! And finally usb charging 👌

Thanks

17/08/2026

Solid 🐗 tracked down that was ripping up some padocks.

Plenty of pig activity atm with some more work coming up in a few weeks.

15/08/2026

🦊