2026-10-31
Installing your new vinyl decal is very easy.
Start by cleaning the surface with alcohol or Windex, using a clean paper towel or microfiber cloth.
For small decals, peel backing completely off and place onto surface. For larger decals using masking tape on a short edge or peel some of the backing off and use it to stick a portion of the transfer layer onto the surface.
Using your finger or hard edge object like a creditcard, press from the center towards to edge to remove air bubbles and ensure it sticks completely.
For large decals, peel back a section of the backing paper at a time and use a creditcard or squeegee to press the vinyl down, starting from the center and working out towards the edge. Repeat until entire decal is pressed down.
Remove the clear transfer layer carefully by pulling across the vinyl. DO NOT pull up as this may damage the decal. Work slowly and do not pull hard. Ensure the vinyl is stuck down fully before removing transfer layer.
Enjoy your new premium quality vinyl decal.
Visit www.phatstickers.ca for more information