All Type Drilling

All Type Drilling All Type Drilling is a Geotechnical, Exploration, Geothermal and Environmental drilling company.

All Type Drillings Services

Drilling Services:

*Mud Rotary
*Odex Casing System
*Solid Stem Augers
*Hollow Stem Augers
*Diamond Coring
*Open Hole Air Rotary
*Laskey Coring

Specializing in:

*Orientated Core
*Packers (IPI, IVA, and Nitrogen)
*Split Spoons
*Nested Wells
*Shelby Tubes
*Vain Sheers
*Slope Inclinometers
*Pneumatic Piezometres
*Monitoring Wells
*Decommissioning Wells
*Thermosters
*Vibrating Wires
*Geothermal Loops

Spending a few weeks on a Mountian in a coal mine installing VWP’s.
10/26/2025

Spending a few weeks on a Mountian in a coal mine installing VWP’s.

Busy week ahead, 7x 27m Odex holes
09/08/2025

Busy week ahead, 7x 27m Odex holes

07/12/2025

JOB POSTING: CASUAL GEOTECHNICAL DRILL HELPER

Location: Edmonton Area, AB
Start Date: Week of July 21st
Type: Casual/Temporary

All Type Drilling is looking for a motivated and reliable Geotechnical Drill Helper to join our team for several upcoming drilling projects in and around the Edmonton area.

WHAT YOU'LL DO

• Work under the supervision of a senior driller, drilling field supervisor, or operations manager

• Take on routine daily tasks, with guidance based on your experience level

• Safely perform assessed tasks independently, and other duties as directed

• Maintain a safe workplace by following risk management and safety protocols

• Identify and minimize environmental hazards

• Set up and prepare for daily drilling operations

• Load, secure, and unload drilling equipment and materials

• Set up and pack up drill sites

• Support the drilling operation: handle rods, augers, casing, and drilling tools; collect and handle samples; mix drilling fluids; carry out basic maintenance; keep sites clean; perform supply counts; basic measurement/calculations; pre-start checks; refuel vehicles and rig

• Operate non-drilling equipment as needed (light/heavy vehicles, cranes, forklift, skid steers, track-mounted utility vehicles, etc.)

• Communicate effectively and work well with others

• Work long hours when required

• Lift up to 50 lbs as part of daily duties

WHAT YOU’LL NEED

• Physically fit for hands-on work

• CSA-approved work boots and hardhat (required)

• Gloves, safety glasses, safety vest, and ear protection (can be supplied)

• Willingness to learn and follow instructions

• Reliable transportation to job sites in the Edmonton area

APPLY NOW

If you’re ready to join a hardworking team and gain valuable experience in the drilling industry, we want to hear from you!

Email: [email protected]
Phone: 780-919-2531

All Type Drilling is an equal opportunity employer. We thank all applicants for their interest; only those selected for an interview will be contacted.

The crew is out in Regina doing some DMT (Dilatometer) and CPT (cone pe*******on) testing for a few days.
06/30/2024

The crew is out in Regina doing some DMT (Dilatometer) and CPT (cone pe*******on) testing for a few days.

We used Odex, mud rotary and solid stem augers to drill these 11 holes out in Hinton. It was a fun project and we got i...
05/08/2023

We used Odex, mud rotary and solid stem augers to drill these 11 holes out in Hinton. It was a fun project and we got it done without a single hiccup.

We all know this situation… This is the “do we have to drill deeper or not moment”
04/24/2023

We all know this situation… This is the “do we have to drill deeper or not moment”

Beautiful day for mud rotary drilling
04/22/2023

Beautiful day for mud rotary drilling

I have been drilling for a while now and once in a while I have a “wow” moment.We were on a site installing slope inclin...
12/12/2022

I have been drilling for a while now and once in a while I have a “wow” moment.

We were on a site installing slope inclinometers and monitoring wells and dealing with sand boils (sand volcanos)

This site is apparently built on an underground River and it’s crazy to see these sand volcanos flowing in the middle of winter.

No matter how thick of grout with additives we put in these holes, the flowing sand makes it’s own path up and out. It finds its path because the integrity of the soil above is basically nothing.

Infrastructure is going to have a battle with Mother Nature on this project.

We will be back to fight this again in the spring with more SI’s

Travis is the main guy around here! He just completed his first 100’ Odex hole and installed a slope inclinometer. Good ...
08/20/2022

Travis is the main guy around here! He just completed his first 100’ Odex hole and installed a slope inclinometer.

Good job Travis!

07/26/2022

All Type Drilling is looking for a Geotechnical Driller or Drill helper starting the first week of August for 2-3 weeks.

$28hr -$35hr depending on experience

Contact

[email protected]

Odexing some environmental holes in Cochrane.
07/02/2022

Odexing some environmental holes in Cochrane.

Address

Tofield, AB
T0B4J0

Telephone

+17809192531

Website

Alerts

Be the first to know and let us send you an email when All Type Drilling posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category