CAMEX Global Distribution

CAMEX Global Distribution Tires distributor in 🇨🇦

Introducing DOHVAN by Aztema 🇲🇽 🚢 🇨🇦Manufactured in Mexico. Distributed across Canada by Camex Global.From the aggressi...
09/17/2026

Introducing DOHVAN by Aztema 🇲🇽 🚢 🇨🇦

Manufactured in Mexico. Distributed across Canada by Camex Global.

From the aggressive off-road grip of the Therka X/T, to the precision handling of the Phashion Line UHP series — DOHVAN is built for every road, every driver, every fleet.

✅ DOT Certified
✅ Premium quality, engineered by Aztema
✅ Factory-direct price available through Camex Global

Swipe through to see the full lineup 👉

Dealers & fleets — DM us or visit the link in bio to get DOHVAN stocked at your location.

HAIDA TIRES FOR TIRE DEALERS & SHOPS 🛞Explore four options for your product lineup:• HD617 — Winter• HD687 — Winter• EX-...
09/09/2026

HAIDA TIRES FOR TIRE DEALERS & SHOPS 🛞

Explore four options for your product lineup:
• HD617 — Winter
• HD687 — Winter
• EX-COMFORT — All-season
• HD625 — All-weather

Contact CAMEX Global Distribution for available sizes, wholesale pricing and orders full and half container.

📩 [email protected]
🌐 camexglobal.com
📲

NORDARI SNOW ❄️ — Ready for Canadian winter. 🇨🇦The LYKEEN Nordari Snow is a dedicated winter tire designed to deliver co...
08/31/2026

NORDARI SNOW ❄️ — Ready for Canadian winter. 🇨🇦

The LYKEEN Nordari Snow is a dedicated winter tire designed to deliver confident control when snow, slush and icy roads become part of the drive.

❄️ Winter handling — 8/10
💧 Wet handling — 9/10
🛞 3D ultra-thin groove design for enhanced grip
🌨️ Efficient snow & water evacuation
🚗 Multiple passenger sizes available

Dealer inquiries welcome. Ask us for available sizes and pricing.

📩 [email protected]
🌐 camexglobal.com
📲

CAMEX Global Distribution | Proudly supplying Canada 🇨🇦

🌡️ Cold weather quietly steals your PSI.Roughly 1 PSI for every 5–6°C the temperature drops. A mild October to a cold Ja...
08/28/2026

🌡️ Cold weather quietly steals your PSI.

Roughly 1 PSI for every 5–6°C the temperature drops. A mild October to a cold January can cost you 5–7 PSI without a single leak.

Check them cold, before you drive — driving heats the air and hides the problem.
Use the door jamb placard, not the number moulded into the sidewall. That one is the maximum, not the recommendation.

Underinflated tires wear the shoulders, run hot and burn more fuel.

🛞 Bald is too late.2/32" (1.6 mm) — the legal minimum in most provinces4/32" (3.2 mm) — where most manufacturers say rep...
08/21/2026

🛞 Bald is too late.

2/32" (1.6 mm) — the legal minimum in most provinces
4/32" (3.2 mm) — where most manufacturers say replace
6/32" (4.8 mm) — where you want to start the winter

Between 4/32" and 2/32" your wet stopping distance grows a lot while the tire still looks "fine." That gap is where most people get caught.

Uneven wear across the tread? That's alignment or inflation, not age.

NOBHEX — Tier 1 premium, made in Mexico. 🇲🇽NOBHEX brings premium, Mexico-built rubber to the CAMEX lineup — engineered f...
08/19/2026

NOBHEX — Tier 1 premium, made in Mexico. 🇲🇽
NOBHEX brings premium, Mexico-built rubber to the CAMEX lineup — engineered for every driver.

▸ KHAMINO — Passenger Car (PCR)
▸ JAYGUEY — SUV / Highway Terrain (HT)
▸ QHUALI & THRAC — Ultra High Performance (UHP)
▸ THOKO X/T — SUV / All-Terrain (XT)

Five of nine tread patterns from the full NOBHEX catalog — available now through CAMEX Global Distribution.
📩 [email protected]
🌐 camexglobal.com
📞 +1 (672) 514 2877
Ask about full container, half container, or per-item ordering.

🪙 The quarter test. No tools needed.Insert a Canadian quarter into the tread groove with the caribou's nose pointing dow...
08/14/2026

🪙 The quarter test. No tools needed.

Insert a Canadian quarter into the tread groove with the caribou's nose pointing down.

Nose covered → you've got more than 6/32" (4.8 mm). You're good.
Nose visible → you're at 6/32" or less. Time to start shopping.

Check the inner, middle and outer grooves — wear is rarely even. If one side is worse, that's alignment or pressure, not mileage.

Save this one. 🌐 camexglobal.com


📦 One container. Your mix.Not every shop needs a full 40HQ — so we do both.FULL CONTAINER (FCL) — best cost per unit, yo...
08/12/2026

📦 One container. Your mix.

Not every shop needs a full 40HQ — so we do both.

FULL CONTAINER (FCL) — best cost per unit, your brands, your sizes, your patterns, delivered direct to your warehouse.

HALF CONTAINER — same factory-direct advantage, half the cash tied up. The low-risk way to test a new line before you commit.

Either way, you pick the spec and we handle sourcing, logistics and shipping.

Pre-book to lock your allocation and your pricing before the container is loaded. Net 30 / 60 / 90 on approved credit, 2% off if paid within 15 days.

Not sure which fits? Tell us your monthly volume and we'll size it for you. 🌐 camexglobal.com

Still texting your rep at 11pm to check if a size is in stock? 📱There's a faster way. Register at camexglobal.com and yo...
08/10/2026

Still texting your rep at 11pm to check if a size is in stock? 📱

There's a faster way. Register at camexglobal.com and you get:

✅ Full dealer price list
✅ Real-time inventory — what's actually on the floor
✅ Send your PO straight to your rep
✅ Delivery to your door across Canada 🇨🇦
✅ Net 30 / 60 / 90 on approved credit, 2% off if paid within 15 days

Full container and half container pre-orders available on the brands you move most.

Ask your sales rep, or DM us to get set up. 🌐 camexglobal.com

Address

Vancouver, BC

Telephone

+16725142877

Website

Alerts

Be the first to know and let us send you an email when CAMEX Global Distribution posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CAMEX Global Distribution:

Shortcuts

Share

Category