10/08/2026
Kenmore washer leaking after startup? Here’s a real washer repair in Winnipeg by Appliance Fix Lab.
Water appeared on the floor shortly after the washer started. During diagnosis, I removed the front and top panels and found a torn internal fill hose connecting the water inlet valve to the washer tub. This was an internal hose, not an external water supply hose or a drain hose.
After the customer approved the labour and part cost, I replaced the damaged hose. I then ran a wash cycle and checked the main operating modes. No leaks were observed, and the washer worked correctly.
If your washer leaks, stop the cycle and turn off the water supply if you can safely reach the valves. Similar leaks can have different causes, so diagnosis matters.
Need washer repair in Winnipeg?
Call Appliance Fix Lab: 204-955-5560.
Service call: $95 + tax per appliance, including travel and initial diagnosis. Repair labour and parts are quoted separately and approved before repair.
Read the full repair story:
https://www.appliancefixlab.ca/post/post-kenmore-washer-leaking-during-fill-winnipeg