Fluxim

Anrufen Wegbeschreibung Website

Fluxim FLUXiM AG provides swiss-made software and hardware for R&D on OLEDs, displays, lighting and solar cells to industry and academia worldwide. In 2006 Prof.

FLUXiM AG is a Swiss company that provides simulation software and measurement hardware for research and development of displays, lighting, and photovoltaic cells in industry and academia. Our company name FLUXiM is derived from flux simulation. Our activity started at the Institute of Computational Physics at the Zurich University of Applied Sciences. Dr Beat Ruhstaller founded FLUXiM as a spin-off company. Our software products Setfos and Laoss are designed to simulate the fundamental operational mechanisms of LEDs and solar cells (organic, perovskites and quantum-dots), also at the large-scale. Light-outcoupling from OLEDs, light-absorption in thin-film solar cells, but also charge generation, transport and recombination in these semiconductor devices are all mechanisms that can be simulated with our software. Setfos and Laoss are simulation software that boosts research and development of OLEDs, displays, lighting panels, solar cells, and photovoltaic arrays. Our hardware products Paios, Phelos and Litos are all-in-one measurement platforms with integrated analysis software for electrical and optical device characterization, parameter extraction, and model validation. We also provide services such as consulting, training, software development, and specific device characterization for prospectives. Check out our references and testimonials for more information about our activities.

Fluxim at PSCO 2026With PSCO taking place in our home country this year, the journey was a little simpler than usual. If...
15/10/2026

Fluxim at PSCO 2026
With PSCO taking place in our home country this year, the journey was a little simpler than usual. If you didn’t make it to Lausanne, here’s what stood out to us...

We came back from PSCO with a lot of notes, as always. Some we’ll discuss in more detail; others that seemed relevant at the time will probably be saved for another day.

There are far too many discussion points for a LinkedIn post — or even a blog — but if we had to sum up our impression in one sentence:

The perovskite community feels more mature, more reflective, and more focused on the questions that really matter.

What encouraged us most was the noticeable shift away from record efficiencies alone and towards stability, reproducibility, statistics and realistic testing conditions.

One comment from Henry at the conference dinner captured this particularly well: remember to report stability for more than one cell (we have an instrument for just this purpose ;-). hashtag

Throughout the conference, there was a clear awareness that single-device results are no longer enough. Understanding stability under different voltages, light intensities, wavelengths and temperatures is becoming increasingly important.

There also seemed to be less emphasis on simply advertising the latest efficiency number. Instead, much of the discussion centred on two broad questions: What is fundamentally happening inside these devices? And how do we make them reliably stable?

These topics may be less spectacular than another headline efficiency, but they are exactly what will determine whether the technology can move forward with confidence.

There are still plenty of open questions — from clearer benchmarking and testing protocols to the surprisingly limited presence of simulation and modelling. But that is also what made the conference interesting: the field is asking harder and increasingly practical questions.

And those questions are expanding beyond terrestrial PV. From tandems and material availability to AI-driven experimentation and perovskites for space applications, the range of potential applications continues to grow.

We left Lausanne with a positive feeling. Perovskites are no longer just an exciting research topic; they are becoming a field increasingly serious about reliability, transparency and real-world — and even off-world — relevance.

Thanks to the organizing committees for another strong scientific programme, and to everyone who stopped by the Fluxim booth or joined the discussions.

See you at PSCO 2027.

A large extraction barrier does not necessarily mean a transport layer is unsuitable for a high-efficiency solar cell.In...
15/10/2026

A large extraction barrier does not necessarily mean a transport layer is unsuitable for a high-efficiency solar cell.

In this Materials Futures paper, Yi et al. used the simulation software Setfos to investigate how extraction barrier, thickness, carrier mobility and dielectric constant interact inside solar-cell transport layers.

More than 10,000 drift-diffusion simulations revealed the key point: what matters is minimizing the voltage drop across the transport layer. Even an extraction barrier of 0.3 eV can be compensated through suitable device design.

The researchers then validated this experimentally in perovskite solar cells and introduced the evaluation factor θ to make transport-layer screening more practical.

This is precisely where device simulation helps: instead of rejecting a promising material based on one parameter, researchers can examine the complete device physics and identify which properties need to change.

If transport-layer interfaces or charge extraction are limiting your devices, see how Setfos can help you test the physics before the next fabrication cycle.

Congratulations to the team at Fudan University and for trusting in Setfos

The open access paper can be read here:
Yi, R., Hu, Z., Zhang, J., You, F.-Y., Zhang, T., Ma, B., Zhu, G., Zhu, C., Liu, S., Yu, X., Feng, W., Pei, Y., Yu, A., Zhan, Y., Li, W., Qin, J., & Hou, X. (2026). Unlocking the potential of transport layers in solar cells: A universal design principle for high efficiency despite high extraction barriers. Materials Futures, 5, 025105. https://doi.org/10.1088/2752-5724/ae3ab8

Explore Setfos →https://fluxim.com/setfos

Emitter orientation is a key parameter in OLED performance.The distribution of dipoles in the emissive layer directly in...
14/10/2026

Emitter orientation is a key parameter in OLED performance.
The distribution of dipoles in the emissive layer directly influences light outcoupling and overall device efficiency.
Yet in many workflows, it is still inferred indirectly or not quantified with sufficient accuracy.

Phelos enables:
✅ Angle- and polarization-resolved PL and EL measurements

✅ Model-based extraction of dipole orientation

✅ Consistent data for optical simulation workflows in Setfos to determine the emission zone in your device

This allows you to move from assumptions to quantitative device understanding, reducing uncertainty in OLED stack design.
If you are working on high-efficiency OLEDs, emitter orientation should be part of your standard characterization

Request a Demo today https://www.fluxim.com/phelos

If you work with OLEDs or solar cells, understanding device physics is everything.Our latest article shows how Setfos he...
28/09/2026

If you work with OLEDs or solar cells, understanding device physics is everything.
Our latest article shows how Setfos helps you model real device behaviour — optical, electrical and thermal — in one environment.

From self‑heating, tunneling, multiple light sources, OLED degradation, and IMPLS, Setfos gives researchers the tools to analyze what’s really happening inside their devices.

https://www.fluxim.com/newsletters/setfos-simulation-capabilities

A major challenge in OLED research is understanding where optical energy is lost inside the device — and how to recover ...
22/09/2026

A major challenge in OLED research is understanding where optical energy is lost inside the device — and how to recover more of it.
A new Nature Photonics paper from researchers at Kyung Hee University, the University of Cologne and the University of St Andrews explores this using a quantum-dot interlayer in inverted phosphorescent OLEDs.

The optimized device reached 20.95% EQE, compared with 15.67% for the reference device, while also improving operational stability.
Setfos was used to analyse optical modes, power dissipation, light outcoupling and layer-thickness effects, helping the researchers understand the optical losses in the OLED stack.

Congratulations to Thi Thuy Truong, Hai Truyen Dang, Nisha Vergineya S, Malte C. Gather and Jang Hyuk Kwon on the publication.

Learn more about Setfos:
fluxim.com/setfos

Paper:
https://doi.org/10.1038/s41566-026-02001-2

ISOS 17 starts today in Paris-Saclay.This evening, Fluxim’s Dr. Antonio Cabas Vidani will present poster  #25:Combined e...
21/09/2026

ISOS 17 starts today in Paris-Saclay.

This evening, Fluxim’s Dr. Antonio Cabas Vidani will present poster #25:

Combined experimental-simulation study of losses and instability in mesoscopic perovskite solar cells

📍 ISOS 17, Paris-Saclay

📅 Monday, 21 September

🕕 Poster session: 18:00–19:30

Conference presentations are a great way to hear the latest research, but some of the most informative conversations can happen afterwards at the poster.

Poster sessions give you the opportunity for a one-to-one discussion with the researcher — to dig deeper into the results, ask about experimental details, discuss modelling assumptions and compare approaches.

If you are at ISOS 17, stop by poster #25 and talk to Antonio.

Getting efficient red OLEDs is only part of the challenge. For next-generation displays, we also need narrow emission, l...
09/09/2026

Getting efficient red OLEDs is only part of the challenge. For next-generation displays, we also need narrow emission, low efficiency roll-off, long operational stability, and highly saturated color.

A new Small paper from researchers at Kyung Hee University addresses these challenges together.

Their 3DBFBNO red MR-TADF OLED reached 31.63% EQE, retained 30.96% EQE at 5000 cd m⁻², and achieved an LT90 of 571 hours using an exciplex-assisted phosphorescent-sensitized fluorescence architecture.

To further improve color purity, the researchers used Fluxim Setfos to systematically optimize the top-emission OLED microcavity, including cavity length, electrode reflectivity, and emission-zone position.

The resulting device produced a 619 nm emission peak with an ultranarrow 23 nm FWHM and CIE coordinates of (0.68, 0.32), approaching the BT.2020 red primary.

This work shows how optical simulation can support emitter and device engineering in top-emission OLED design.

Congratulations to the team at Kyung Hee University, Korea on this impressive work. As Setfos customers, we’re pleased to see the software supporting their top-emission OLED development, and we thank them for their continued trust in Setfos.

Are you working on OLED microcavities or display color optimization?

Explore Setfos → fluxim.com/setfos

Tirupati, M., Vergineya S, N., Kumar, O. P., Rajput, A., Kim, H. U., Kim, J. Y., Muruganantham, S., & Kwon, J. H. (2026). Dibenzofuran-modulated narrowband red MR-TADF emitters for BT.2020 OLEDs with ultralow roll-off and long lifetime. Small, e74546. https://doi.org/10.1002/smll.74546

A bifacial module sees light from both sides. An indoor PV device sees a lamp spectrum that looks nothing like sunlight....
24/08/2026

A bifacial module sees light from both sides. An indoor PV device sees a lamp spectrum that looks nothing like sunlight. A tandem EQE measurement needs each subcell at its own bias light.

None of those is a single beam of AM1.5 arriving normal to the surface.

Setfos 6.1 makes them first-class citizens of the simulation. Details in the newsletter.

https://www.fluxim.com/newsletters/setfos-6-1-release-multiple-light-sources-impls
.1

Adresse

Katharina Sulzer Platz 2
Winterthur
8400

Öffnungszeiten

Montag 09:00 - 17:00
Dienstag 09:00 - 17:00
Mittwoch 09:00 - 17:00
Donnerstag 09:00 - 17:00
Freitag 09:00 - 17:00

Telefon

+41445004770

Benachrichtigungen

Erfahren Sie als Erste/r von Neuigkeiten und Aktionen: Wir schicken Ihnen eine E-Mail, wenn Fluxim etwas veröffentlicht. Ihre E-Mail-Adresse wird für keinen anderen Zweck verwendet, und Sie können sich jederzeit abmelden.

Teilen