Shandong Power Industry And Trade Co., Ltd.

Home
China
Qingdao
Shandong Power Industry And Trade Co., Ltd.

Welcome to Andy marine! Builders of quality marine hardware and lasting relationships for more than 25 years.

03/06/2026

The heavy bow chock is suitable for installation at positions with high stress. This bow chock can usually be applied in front of the mooring posts at the bow, stern or midsection of the boat.When the rope needs to change direction, the bow chock can provide a smooth turning point.
The opening of the bow chock should in the opposite direction of the rope's movement.Otherwise, when the rope slackens, it will slip out through the opening.Especially at the bow position, the released ropes may directly hit the hull or the deck, which is extremely dangerous.
If the bow chock is directly installed, when the rope is under tension, the bow chock will concentrate the force around the installation hole. Over time, this may cause damage to the hull or the deck.When installing the bow chock, adding a stainless steel backing plate can help distribute the tension.

🔗https://www.hardwaremarine.com/

22/05/2026

🎉This cockpit drain has a simple structure and there is no need to worry about rust or leakage at the welds.It adopts a 90-degree elbow structure. This design has two advantages: First, the 90-degree elbow naturally forms a water seal, which can effectively prevent odors and insects. Second, the elbow can be directly connected to the drainage pipe without the need for additional fittings.

🎉Before installing this cockpit drain, there are a few details that deserve attention. First, before installation, please measure the inner diameter of the drainage pipe. This product offers two interface sizes, corresponding to pipes of different thicknesses. Secondly, during installation, an additional layer of sealant can be applied beneath the fl**ge. This step effectively prevents corrosion caused by long-term water accumulation at the opening.

🔗https://www.hardwaremarine.com/

15/05/2026

🎉The boat's sun canopies, bimini tops and flagpole often need to be frequently disassembled and reassembled. The traditional joints require the use of tools to tighten the screws, which makes the operation rather slow.
🎉This joint is equipped with a pull-out mechanism. You can manually pull out the pin to quickly complete the folding. Use your fingers to grip the pull ring and pull it outward. The pin will then pulled out of the lock hole.
🎉When the tube is adjusted to the proper position, you can insert the pin back to secure it. The entire process does not require a wrench or any tools.

🔗https://www.hardwaremarine.com/

09/05/2026

🎉This telescoping marine drop ladder is available in three lengths - 2 steps, 3 steps and 4 steps - and can be used for boarding vessels ranging from small fishing boats to large yachts.
📌The ladder is made of stainless steel and features PVC anti-slip steps, ensuring both durability and safety.Please feel free to contact our team to obtain more detailed information about the marine ladders.

🔗https://www.hardwaremarine.com/

27/04/2026

📌Andy Marine’s recently launched series of 316 stainless steel handrail rectangular base , available in four standard angles—30°, 45°, 60°, and 90°—and covering a range of pipe diameters from 7/8 inch to 1-1/4 inch, offers a comprehensive selection of options for the marine assembly sector.
📌This product series is made entirely of 316 stainless steel, formed using precision casting techniques and finished with a mirror-polished surface, ensuring consistent performance in terms of seawater corrosion resistance and long-term durability.The bases for different angles correspond to specific mounting dimensions; the compact structural design ensures both a snug fit and robust support.
📌From transition bends to straight connectors, Andy Marine’s systematic selection of angles and specifications helps customers minimize on-site modifications during design and construction, thereby improving installation efficiency. Whether for new-build vessels or retrofit projects, this series offers the right component solutions for every need.

🔗https://www.hardwaremarine.com/

20/04/2026

📌The standard model folding cleat is suitable for most small and medium-sized vessels.
✅This cleat does not come with screws.The user is required to prepare the stainless steel screws and washers by themselves.The center distances of the installation holes are 71, 75.5 and 119 millimeters respectively.The standard cleat is suitable for the side mooring points of most sailboats and powerboats.

📌The cleat with screws comes with the fasteners included, reducing the hassle of procurement.
✅Each cleat is equipped with a dedicated stainless steel screw.Moreover, the screw and the cleats are designed as a single unit, and no holes need to be reserved on the surface. Compared with the conventional cleats, its surface is cleaner and more pleasing.

📌The unique button design of this cleat makes it easily to open the handle.
✅There is a button at the end of this cleat handle. When the button is pressed, the handle will automatically spring up to a vertical position.This mooring cleat is suitable for installation at locations where rapid mooring is frequently required, such as the stern of a ship or a floating dock. The crew can operate it with one hand, while the other hand can simultaneously pull the rope.

🔗https://www.hardwaremarine.com/

13/04/2026

📌This latch is made of 316 stainless steel and is suitable for applications such as small instrument housings, standard electrical cabinets, and reinforced sealed hatches.
📌All latches use a spring-loaded locking mechanism, providing clear tactile feedback when closed and will not loosen on their own due to the ship's rolling.
📌Mounting holes are compatible with M4 or M5 self-tapping screws.
📌Compared to ordinary iron locks, 316 stainless steel has high corrosion resistance in marine environments.
📌For shipyard repairs or shipowner replacements, this latch can meet the locking needs of most cabinet doors and hatches on board.

🔗https://www.hardwaremarine.com/

07/04/2026

🎉The 316 stainless steel folding seat hinge is designed for the space-constrained and flexible layouts of marine environments. Made from high-strength marine-grade stainless steel, it is suitable for outdoor environments with high humidity and salinity. Its unique design allows for quick folding and secure locking of the seat.

🎉The seat hinge has an unfolded width of 269mm*362mm, suitable for 6 mm thick panels. Its robust structure provides stable support. The folding angle of the seat hinge is set at 90°, ensuring flat support during seat use while providing sufficient folding clearance to prevent jamming. All mounting holes and hinge points are precision-machined to ensure long-term smooth and wobbly operation.

🎉On fishing boats, small motorboats, or sailboats, deck space often needs to be rearranged. This seat hinge design allows the seat to be flush against the wall when not in use, freeing up space for passage and work; when needed, it can be quickly unfolded to restore its seating function.

🔗https://www.hardwaremarine.com/

23/03/2026

📌The tank vent for boat compartments involves not only material durability but also compatibility with installation space. Andy Marine's 316 stainless steel tank vent is a specialized exhaust component designed for confined spaces such as cabins, tanks, and fuel tanks.

📌Constructed from 316 stainless steel, this product offers superior resistance to seawater corrosion, making it suitable for prolonged exposure on decks and bulkheads. Its 90° elbow design directs exhaust flow perpendicular to the mounting surface, effectively avoiding overhead obstructions and minimizing installation complications caused by pipe bends. With an overall height of 68.4 mm, a connection depth of 23 mm, and a core vent aperture of 11.7 mm, all dimensions are precisely calibrated to balance venting efficiency and installation ease.

📌This vent is suitable for freshwater tanks, fuel tanks, and other enclosed compartments requiring internal/external pressure equalization. The 90° design optimizes installation in confined spaces or areas requiring flush-mounted piping. The vent orientation can be adjusted as needed to prevent direct ingress of rainwater or deck washdown water.

🔗https://www.hardwaremarine.com/

13/03/2026

✅For shipowners pursuing an exceptional maritime experience, how can enhance cabin ventilation,natural light, and spatial openness? Andy Marine's newly launched high-performance aluminium alloy hatch series provides the perfect solution.

✅This series of aluminium alloy hatch is precision-manufactured from high-quality aluminum alloy. This material not only ensures a lightweight overall structure to reduce vessel load but also provides outstanding structural strength and resistance to deformation, guaranteeing long-term reliability.

✅We offer two mainstream designs—round and square—with over ten different sizes available.

✅The extensive selection of options makes this series of aluminium alloy hatch suitable for a wide range of vessels, including yachts, sailboats, and fishing boats. It addresses multiple considerations—natural light, ventilation, and spatial aesthetics—to deliver truly bespoke solutions.

✅Andy Marine consistently prioritizes quality and customer satisfaction above all else.Every hatch embodies our master craftsmanship, from profile extrusion and precision machining to sealing assembly, all subject to rigorous quality control.

✅We pay close attention to detail to ensure our products deliver superior watertight performance and smooth operation, providing users with a reliable and worry-free experience.

🔗https://www.hardwaremarine.com/

Address

Room 2204B, Zhonghai Building, No. 76 Yanji Road
Qingdao
266000

Telephone

+8615865772126

Website

http://www.hardwaremarine.com/

Alerts

Be the first to know and let us send you an email when Shandong Power Industry And Trade Co., Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Shandong Power Industry And Trade Co., Ltd.:

Shortcuts

Want your business to be the top-listed Business in Qingdao?