Zhuhai Enlite Technology Co.，Ltd

Call Directions Website Contact the business

Zhuhai Enlite Technology Co.，Ltd Enlite is a professional manufacturer of printer consumables, offering high-quality toner cartridges, ink cartridges,DTF ink and printing solutions.

With over 17 years of experience, Enlite delivers reliable, cost-effective products for global businesses.

08/10/2026

🛠️ HP W9006MC Drum Replacement Guide 🖨️

Quick installation steps for HP LaserJet MFP E72525 / E72530 / E72535 / M72625 / M72630 copiers:

1️⃣ Open front cover & remove waste toner box.

2️⃣ Unscrew two lock screws (1st-time replacement only).

3️⃣ Release lever & pull out old drum unit.

4️⃣ Slide in new W9006MC drum & lock lever back.

5️⃣ Reinstall waste toner box & close cover.

Looking for high-quality W9006MC drum units at direct factory prices?
👉 Contact us today for direct factory wholesale prices & technical catalogs!

06/10/2026

🛠️ HP LaserJet P1006/P1108: Fast Paper Jam & Pickup Roller Fix!

Tired of paper jams, multi-sheet feeding, or pickup failure on your HP LaserJet printers? A worn pickup roller is the #1 culprit! 💡

Follow this quick 5-step technician guide to replace it yourself:
✅ Compatible Models: HP LaserJet P1006, P1007, P1008, P1102, P1106, P1108
✅ Part Needed: Pickup roller for HP CC388A / CB435A series

🔻 STEP-BY-STEP REPLACEMENT:
1️⃣ Power Off & Remove Toner: Turn off the printer, open the front door, and pull out the CC388A toner cartridge.
2️⃣ Locate & Release: Find the black rubber pickup roller inside. Gently pry open the plastic clips on both sides.
3️⃣ Remove & Replace: Slide out the worn roller → Align the NEW Pickup Roller and snap the clips securely into place.
4️⃣ Reassemble: Reinstall the toner cartridge and close the front door.
5️⃣ Test: Power on and run a test page to verify smooth paper feeding!

⚠️ Tech Note: Always disconnect power before servicing. If feeding issues are minor, cleaning the rubber surface with alcohol can serve as a temporary fix!

Looking for premium, 100% OEM-matched HP CC388A toners, pickup rollers, and printer spare parts?
👉 DM us today for direct factory wholesale rates!

03/10/2026

🛠️ Kyocera ECOSYS P5021cdn / M5521cdn Maintenance Guide: How to Replace the Rear Separation Roller! 🖨️
Is your Kyocera ECOSYS P5021cdn (or M5521cdn/P5026/M5526 series) experiencing multi-page feeding or paper paper jams from the MP tray/rear feed? Replacing the Paper Separation Roller can solve these issues in just a few quick steps!

Follow this step-by-step tutorial to replace or inspect the separation roller effortlessly:
📌Quick Step-by-Step Guide:
Open Rear Cover: Open the back cover door of the Kyocera printer.
Remove Cover Guide: Press and hold the guide module, then slide it obliquely upward to remove.
Release Separation Roller: Flip open the protective cover, press the locking tab, and slide it to the right to release the roller.
Reinstall & Align: When installing the new roller, align it with the slide track and push it left into place.
Re-attach Guide: Ensure the arrow on the guide module points downward, align it with the slide tracks, and snap it back in.
Keep your Kyocera A4 color desktop printers performing at their peak with simple DIY maintenance! 🔧
✉️ Looking for high-quality Kyocera replacement parts, rollers, or compatible toner cartridges? Send us a DM today!
🌐 Website: http://www.enlite-china.com

01/10/2026

🛠️ Kyocera Ecosys P2235dn Series: DK-1153 Drum Unit Replacement Guide!

Experiencing black streaks, background haze, or print quality degradation on your Kyocera P2235dn/P2040dn printers? Here is the fastest 4-step guide to replace the DK-1153 drum unit! 💡

🔻 STEP-BY-STEP REPLACEMENT:
1️⃣ Open Covers: Open the top cover and the front cover.
2️⃣ Remove Developer Unit: Press the blue release latch to pull out the Developer Unit.
3️⃣ Replace Drum Unit: Pinch the blue latches on both sides to release and lift out the old DK-1153 drum unit. Align and insert the NEW DK-1153 Drum Unit into the slot until locked.
4️⃣ Reassemble & Test: Slide the Developer Unit back into place, close both covers, and run a test print!

Looking for premium-grade, long-life DK-1153 drum units & TK-1150/1152 toner cartridges with factory-direct pricing?
👉 DM us today for direct wholesale rates & technical catalogs!

29/09/2026

🛠️ Konica Minolta bizhub C226/C256/C266: Drum Unit Replacement & Printhead Cleaning Guide!

Experiencing print quality issues or drum life alerts on Konica Minolta C226 series copiers?
Follow this clean, step-by-step technician guide to replace drum units safely and perform LED printhead glass cleaning! 💡
✅ Compatible Models: Konica Minolta bizhub C226, C256, C266
🔻 REMOVAL & REPLACEMENT STEPS:
1️⃣ Open Door & Remove Waste Box: Open the front cover, release the locking latches, and slide out the waste toner box.
2️⃣ Extract Old Drum Unit: Unlock the target drum unit and carefully pull it out.
3️⃣ Install New Drum Unit: Unbox the new unit only right before installation (avoiding light exposure). Slide the new drum unit into the slot until fully seated, then lock it back in place.

🔻 DRY PRINTHEAD GLASS CLEANING:
1️⃣ Extract Cleaning Tool: Pull out the built-in printhead cleaner rod stored inside the front compartment.
2️⃣ Dry Wipe: Align the wand with the printhead glass slot, push it all the way to the end, and pull it out.
3️⃣ Repeat: Repeat the push-and-pull action 3 times for each of the 4 color slots to wipe away toner dust!
4️⃣ Reassemble: Reinstall the waste toner box, lock it securely, and close the front cover.

Looking for premium-grade, 100% OEM-compatible Konica Minolta C226/C256/C266 drum units, toner cartridges, and spare parts?
👉 DM us today for direct factory wholesale rates & technical catalogs!

26/09/2026

🛠️ Konica Minolta bizhub C3850/C3350: How to Clear Fuser Jam!

Got a paper jam error around the fuser unit on your Konica Minolta C3850/C3350 copier?
Here is the safe & standard 5-step removal procedure! 💡

🔻 STEP-BY-STEP CLEARANCE:
1️⃣ Close Tray & Open Side Door: Ensure the multi-bypass tray is closed, then pull the lever to open the right side cover.
2️⃣ Open Fuser Cover: Press up the green levers/latches to open the fuser unit cover.
3️⃣ Safely Pull Jammed Paper: Hold both sides of the jammed paper firmly with two hands and slowly pull it out.
4️⃣ Reassemble: Close the fuser cover, then close the right side door firmly.
5️⃣ Verify: Check the touchscreen display—once the error prompt disappears, your copier is ready to print!

Looking for premium-grade, 100% OEM-compatible Konica Minolta C3850/C3350 fuser units, imaging units, and toner cartridges?
👉 DM us today for direct factory wholesale rates & tech support!

🌕 Warmest Mid-Autumn Wishes Across Asia & Beyond! 🥮The Mid-Autumn Festival is a beautiful celebration of reunion and har...
24/09/2026

🌕 Warmest Mid-Autumn Wishes Across Asia & Beyond! 🥮
The Mid-Autumn Festival is a beautiful celebration of reunion and harvest cherished across many Asian countries:South Korea (Chuseok) | Vietnam (Tết Trung Thu) | Japan (Tsukimi) | Singapore & Malaysia — each with unique traditions, yet all bound by the same glowing full moon.
Beneath this same bright sky, we extend our deepest gratitude to all our global partners. Your trust and support are what drive us forward every single day!
✨📅 HOLIDAY NOTICE:
• Day Off: Sep 25th – Sep 27th
• Back to Business: Sep 28th (Monday)
🌸 Warm Support Continues:
While our team pauses briefly to celebrate with family, our care for your business never stops. We remain online to address your inquiries and follow up on orders promptly. Feel free to DM or email us anytime!
Wishing you and your loved ones peace, joy, and prosperity this full-moon season! 💛

22/09/2026

🛠️ Samsung Xpress SL M2625/M2675/M2826/M2875: Separation & Pickup Roller Replacement

Experiencing paper jams or multi-sheet feeding on Samsung M2626/M2876 printers? Follow this quick guide to replace both rollers:

🔻 1. Separation Roller (Tray):
1️⃣ Pull out paper tray → Pry open side latches & remove cover.
2️⃣ Lift up one side to remove old roller → Install NEW Separation Roller following latch direction → Snap cover back.

🔻 2. Pickup Roller (Bottom Assembly):
1️⃣ Flip printer upside down → Unscrew & remove bottom guard plate (2 screws).
2️⃣ Unscrew pickup roller (2 screws) → Push latch right & remove old roller.
3️⃣ Install NEW Pickup Roller → Tighten screws → Reattach guard plate & flip printer back!

⚠️ Tech Tip: Tighten guard plate screws evenly to prevent paper skewing!

Looking for premium, 100% OEM-matched Samsung MLT-D116 toners, drums, and spare parts?
👉 DM us today for factory-direct wholesale pricing!

20/09/2026

🛠️ Fuji Xerox DocuCentre S2110/1810/2350: Drum Unit Replacement Guide!

Experiencing black lines, background haze, or print density issues on Fuji Xerox S2110/2350 series copiers? Here is the fastest & standard technician sequence to replace the Drum Unit! 💡

🔻 REMOVAL & INSTALLATION STEPS:
1️⃣ Unscrew & Open Cover: Remove the securing screw and take off the protective side cover.
2️⃣ Unplug & Remove: Gently unplug the sensor wire connector, then slide out the old Drum Unit.
3️⃣ Insert New Drum: Slide the NEW Drum Unit smoothly along the guide rails until fully seated.
4️⃣ Reconnect & Secure: Plug the sensor wire connector back in, replace the side cover, and tighten the securing screw.
5️⃣ Finish: Close all covers, power on, and print a test page to check quality!

⚠️ Tech Note: Always ensure the sensor connector is plugged in firmly before closing the cover to prevent communication code errors or unrecognised drum alerts!

Looking for premium, 100% OEM-matched Fuji Xerox S2110/1810/2350 drum units and toner cartridges with high page yield?
👉 DM us today for factory-direct wholesale rates & technical support!

18/09/2026

🛠️ Canon iR-ADV 4525/4535/4545/4551: Drum Unit Replacement Guide!

Experiencing black streaks, background haze, or code errors on Canon 4500 series monochrome copiers? Follow this clean & simple technician sequence to replace the Drum Unit safely! 💡

🔻 REMOVAL STEPS:
1️⃣ Open Covers: Open the front cover and the right side door.
2️⃣ Remove Waste Box: Turn the locking lever and remove the Waste Toner Box.
3️⃣ Release Drum Unit: Unscrew the drum securing screw, turn the lock lever, press the drum release button, and pull out the old Drum Unit.

🔺 INSTALLATION STEPS:
1️⃣ Insert New Drum: Slide the NEW Drum Unit smoothly along the guide rails until locked in place.
2️⃣ Secure & Reassemble: Tighten the securing screw, reinstall the Waste Toner Box, and turn the locking lever back into place.
3️⃣ Finish Up: Close the front cover and side door, then print a test page to verify image density!

⚠️ Tech Note: Always handle the new drum with care and avoid touching or exposing the OPC surface to direct bright light.

Looking for premium, 100% OEM-compatible Canon 4525/4535/4545/4551 drum units ?
👉 DM us today for factory-direct wholesale pricing & catalog!

Address

R00M NO. 232-3, 2ND FLOOR , PLANT NO. 3, ROAD NO. 6366, ZHUHAI Avenue, HONGQI TOWN
Zhuhuai
519000

Telephone

+8615992676269

Website

,

Alerts

Be the first to know and let us send you an email when Zhuhai Enlite Technology Co.，Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Zhuhai Enlite Technology Co.，Ltd:

Shortcuts

Share