09/04/2020
لي يحب يخدم في حجر صحي في بيتو تفضل ;)
Complet code tested(100%)🔛
/*
Lamp 1 connected to PinOut 2 Arduino
Lamp 2 connected to PinOut 3 Arduino
Lamp 3 connected to PinOut 4 Arduino
Lamp 4 connected to PinOut 5 Arduino
Lamp 5 connected to PinOut 6 Arduino
Lamp 6 connected to PinOut 7 Arduino
Lamp 7 connected to PinOut 8 Arduino
Lamp 8 connected to PinOut 9 Arduino
--->you can connected to relay modul 8 channel
Serial data sending from Bluetooth Controll Lamp.apk
data '1'-'8' to on is lamp 1-8
data 'A'-'H' to off is lamp 1-8
data '9' to on ALL is lamp
data 'I' to off ALL is lamp
======================================================================================*/
SoftwareSerial mySerial(10, 11); //Pin10 RX , Pin 11 TX connected to--> Bluetooth TX,RX
Lamp1 2
Lamp2 3
Lamp3 4
Lamp4 5
Lamp5 6
Lamp6 7
Lamp7 8
Lamp8 9
//If Out to active Low change ON 0 and OFF 1
//If Out to active High change ON 1 and OFF 0
ON 0
OFF 1
char val;
String statusLamp1,statusLamp2,statusLamp3,statusLamp4,statusLamp5,statusLamp6,statusLamp7,statusLamp8;
void setup() {
pinMode(Lamp1,OUTPUT);digitalWrite (Lamp1,OFF);
pinMode(Lamp2,OUTPUT);digitalWrite (Lamp2,OFF);
pinMode(Lamp3,OUTPUT);digitalWrite (Lamp3,OFF);
pinMode(Lamp4,OUTPUT);digitalWrite (Lamp4,OFF);
pinMode(Lamp5,OUTPUT);digitalWrite (Lamp5,OFF);
pinMode(Lamp6,OUTPUT);digitalWrite (Lamp6,OFF);
pinMode(Lamp7,OUTPUT);digitalWrite (Lamp7,OFF);
pinMode(Lamp8,OUTPUT);digitalWrite (Lamp8,OFF);
mySerial.begin(9600);
Serial.begin(9600);
}
void loop() {
//cek data serial from bluetooth android App
if( mySerial.available() >0 ) {
val = mySerial.read();
Serial.println(val);
}
//Lamp is on
if( val == '1' ) {
digitalWrite(Lamp1,ON); statusLamp1="1"; }
else if( val == '2' ) {
digitalWrite(Lamp2,ON); statusLamp2="2"; }
else if( val == '3' ) {
digitalWrite(Lamp3,ON); statusLamp3="3"; }
else if( val == '4' ) {
digitalWrite(Lamp4,ON); statusLamp4="4"; }
else if( val == '5' ) {
digitalWrite(Lamp5,ON); statusLamp5="5"; }
else if( val == '6' ) {
digitalWrite(Lamp6,ON); statusLamp6="6"; }
else if( val == '7' ) {
digitalWrite(Lamp7,ON); statusLamp7="7"; }
else if( val == '8' ) {
digitalWrite(Lamp8,ON); statusLamp8="8"; }
else if( val == '9' ) {
digitalWrite(Lamp1,ON); statusLamp1="1";
digitalWrite(Lamp2,ON); statusLamp2="2";
digitalWrite(Lamp3,ON); statusLamp3="3";
digitalWrite(Lamp4,ON); statusLamp4="4";
digitalWrite(Lamp5,ON); statusLamp5="5";
digitalWrite(Lamp6,ON); statusLamp6="6";
digitalWrite(Lamp7,ON); statusLamp7="7";
digitalWrite(Lamp8,ON); statusLamp8="8";
}
//Lamp is off
else if( val == 'A' ) {
digitalWrite(Lamp1,OFF); statusLamp1="A"; }
else if( val == 'B' ) {
digitalWrite(Lamp2,OFF); statusLamp2="B"; }
else if( val == 'C' ) {
digitalWrite(Lamp3,OFF); statusLamp3="C"; }
else if( val == 'D' ) {
digitalWrite(Lamp4,OFF); statusLamp4="D"; }
else if( val == 'E' ) {
digitalWrite(Lamp5,OFF); statusLamp5="E"; }
else if( val == 'F' ) {
digitalWrite(Lamp6,OFF); statusLamp6="F"; }
else if( val == 'G' ) {
digitalWrite(Lamp7,OFF); statusLamp7="G"; }
else if( val == 'H' ) {
digitalWrite(Lamp8,OFF); statusLamp8="H"; }
else if( val == 'I' ) {
digitalWrite(Lamp1,OFF); statusLamp1="A";
digitalWrite(Lamp2,OFF); statusLamp2="B";
digitalWrite(Lamp3,OFF); statusLamp3="C";
digitalWrite(Lamp4,OFF); statusLamp4="D";
digitalWrite(Lamp5,OFF); statusLamp5="E";
digitalWrite(Lamp6,OFF); statusLamp6="F";
digitalWrite(Lamp7,OFF); statusLamp7="G";
digitalWrite(Lamp8,OFF); statusLamp8="H";
}
//synchronize Arduino to APK
else if( val == 'S' ) {
//send data to android apk
delay(500);
mySerial.println(statusLamp1+statusLamp2+statusLamp3+statusLamp4+statusLamp5+statusLamp6+statusLamp7+statusLamp8+"J"); //delay(500);
val=' ';
}
}
//Apk Android remote controll suport this project, download on Playstore:
//Bluetooth Controll Lamp.apk
