Bedaya3d

Call Directions Website Contact the business

Bedaya3d Bedaya 3D | We don’t just print parts — we build solutions. Turning Ideas into Reality.

Professional 3D printing, rapid prototyping, printers & materials, product development, technical consultation & industrial solutions.

Three compensations, three different jobs. 🛠️Each one fixes a different source of error:🔹 Bed mesh: adjusts Z to follow ...
28/10/2026

Three compensations, three different jobs. 🛠️
Each one fixes a different source of error:

🔹 Bed mesh: adjusts Z to follow surface variation it has mapped. It can’t fix faulty mechanics.
🔹 Input shaping: shapes the motion commands to reduce vibration.
🔹 Pressure advance: adjusts the extruder to account for pressure lag when speed changes.

The rule: find the error first, then use the right tool for it, following the correct procedure for your printer.

📍 Featured part: Micro LiDAR, X1 Series
Swipe through the slides 👉 and follow Bedaya for the next chapter.

Sending a move command is not the same as knowing where the motor actually ended up. 🎯🔹 Open loop: the printer sends the...
27/10/2026

Sending a move command is not the same as knowing where the motor actually ended up. 🎯

🔹 Open loop: the printer sends the command with no position feedback, so a missed step can go unnoticed.
🔹 Closed loop: the printer measures the position, compares it to the target, and corrects the difference.
🔹 Where is position measured? A motor encoder watches the shaft, while a load encoder measures after the transmission.
🔹 Microstepping splits a move into smaller commanded steps, but that doesn’t guarantee the same gain in real accuracy.

📍 Featured part: 3513 Extruder Servo Motor, H2D
Swipe through the slides 👉 and follow Bedaya for more.

The extruder is NOT the hotend. They’re two different parts doing two different jobs on the same material path:🔹 Extrude...
27/10/2026

The extruder is NOT the hotend.
They’re two different parts doing two different jobs on the same material path:

🔹 Extruder: grips the filament and pushes it forward.
🔹 Hotend: the heater melts the material and the nozzle lays it down.
🔹 Keep the cold side cold: the heatsink pulls heat away from the upper path, and the heatbreak stops heat from creeping up.
🔹 Direct Drive or Bowden? Where the drive sits changes the toolhead’s weight and the length of the filament path.

📍 Featured part: Bambu Hotend, H2D
Swipe through the slides 👉 and follow Bedaya so you don’t miss the next one.

How does your 3D printer actually move? 🤔Look inside the motion system and you’ll find three common designs, each with i...
27/10/2026

How does your 3D printer actually move? 🤔
Look inside the motion system and you’ll find three common designs, each with its own trade-offs:

🔹 Bed-slinger: the bed moves in Y, the toolhead moves in X, and Z sets the height.
🔹 CoreXY: two motors work together to position the carriage in X and Y.
🔹 Delta: three vertical towers with linked arms position the toolhead.

The design changes how much mass is moving, how the mechanics are laid out, and what you need to calibrate. When you understand how your printer moves, it gets easier to diagnose problems.

📍 Featured part: XY Belt Tensioner, X1 / P1 Series
Swipe through the slides 👉 and follow Bedaya for the next chapter.

A part can look right. Testing shows whether it meets the requirements. ✅Check the finished part under conditions that r...
22/10/2026

A part can look right. Testing shows whether it meets the requirements. ✅

Check the finished part under conditions that represent its intended use:
✓ Loads and temperature
✓ Working environment and expected life
✓ Fit and function in the assembly
✓ Defined pass/fail criteria

Record the results—and what those results actually prove.

Swipe through the verification checklist. Have a functional-part project? Share your requirements with BEDAYA3D.

🌐 https://www.bedaya3d.com/
🛒 https://bedaya3d.shop/
💬 https://wa.me/201000334399

The printer has finished. Your part may still have work ahead. Post-processing is part of manufacturing—and the sequence...
22/10/2026

The printer has finished. Your part may still have work ahead.

Post-processing is part of manufacturing—and the sequence depends on the material and application.

For resin parts, follow the specified washing, drying, and post-curing workflow for the exact resin.

After finishing, recheck critical dimensions, interfaces, and surface requirements in the condition the customer will actually receive.

Swipe through to see what comes after printing.

Discuss your project with BEDAYA3D:
💬 https://wa.me/201000334399

🌐 https://www.bedaya3d.com/
🛒 https://bedaya3d.shop/

What does your part need to do—and under which conditions? Start there when choosing a manufacturing process.Material, g...
22/10/2026

What does your part need to do—and under which conditions?

Start there when choosing a manufacturing process.

Material, geometry, surface finish, and required performance all matter. So do preparation, cleaning, finishing, inspection, and total workflow cost.

Swipe through to explore the decision process, then validate your chosen route with a representative trial part.

Planning a project? Share your application with BEDAYA3D.

🌐 https://www.bedaya3d.com/
🛒 https://bedaya3d.shop/
💬 https://wa.me/201000334399

A successful part starts with the right design decisions. ⚙️Mating surfaces, holes, threads, internal channels—every fun...
22/10/2026

A successful part starts with the right design decisions. ⚙️

Mating surfaces, holes, threads, internal channels—every functional feature helps define how a part should be manufactured.

Before printing, ask:
✓ Which features are critical?
✓ Can internal channels be cleaned?
✓ Can functional surfaces be finished?
✓ Can the required dimensions be inspected?

Swipe through the design checklist, then share your project requirements with BEDAYA3D.

🌐 https://www.bedaya3d.com/
🛒 https://bedaya3d.shop/
💬 https://wa.me/201000334399

The right tool starts with the task. ⚙️3D-printed jigs and fixtures can help position parts and support manufacturing op...
22/10/2026

The right tool starts with the task. ⚙️

3D-printed jigs and fixtures can help position parts and support manufacturing operations—but successful use depends on design, material selection, and validation.

Swipe through to explore:
✓ Part positioning and alignment
✓ Material selection for operating conditions
✓ Dimensional, functional, and wear checks

Have a production task that needs a custom tool? Share your requirements with BEDAYA3D.

🌐 https://www.bedaya3d.com/
🛒 https://bedaya3d.shop/
💬 https://wa.me/201000334399

Let your prints glow! 💙💚PATRON Luminous PLA is now at BEDAYA3D in Blue Glow and Green Glow.After exposure to light, your...
22/10/2026

Let your prints glow! 💙💚

PATRON Luminous PLA is now at BEDAYA3D in Blue Glow and Green Glow.

After exposure to light, your prints glow in the dark — adding a new dimension to decorative models, custom gifts, and creative projects.

What would you make glow first? 🚀

🛒 Shop: https://bedaya3d.shop/
💬 Orders & inquiries: https://wa.me/201000334399

Address

80 Axis, Area#3, Fifth Settelment, New
Cairo

Opening Hours

Monday 10am - 6pm
Tuesday 10am - 6pm
Wednesday 10am - 6pm
Thursday 10am - 6pm
Saturday 10am - 6pm
Sunday 10am - 6pm

Telephone

+201000334399

Alerts

Be the first to know and let us send you an email when Bedaya3d posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Bedaya3d:

Shortcuts

Share

Nearby businesses