Sensor Access Technology

03/09/2026

QR technology isn't right for all facilities, but it can be a strong option in cases where convenience and cost effectiveness are the primary concerns.

QR readers offer a simple, flexible way to manage access for visitors, contractors and temporary users without having to issue physical cards or fobs. QR credentials can be generated and distributed remotely to a user’s smartphone, then updated or revoked when required, making them ideally suited for facilities that see a large number of temporary visitors.

Our QR Readers are suitable for a variety of uses including:

- Securing offices and meeting rooms

- Outdoor installation at external doors or gates

- Reception desk check-ins

- Installation in speed lanes or turnstiles

Upgrade your access control with a solution that’s modern, scalable, and easy to manage.

26/08/2026

Are biometric readers right for every job?

Not always. But in the right place, they can be a very strong option.

Biometric access control, such as fingerprint or facial recognition readers, can help tighten up security by making sure the person gaining access is actually the person authorised to be there.

No cards sharing. No lost fobs. No “I forgot my badge”. And less plastic credential waste over time.

Biometric Readers can be a good fit for higher-security areas like data centres, labs, healthcare environments, research spaces and other restricted areas where knowing exactly who entered really matters.

But there are things to think about before specifying them.

Biometric systems need proper planning, user enrolment, and careful handling of privacy and compliance requirements. Not every user will be comfortable with biometric data, and not every site environment is ideal for reliable scanning.

So, the real question is not “are biometric readers better?” It is “are they right for this site, this risk level, and this group of users?”

Considering biometric readers for an upcoming project? Speak to us for practical guidance, product options and support to help you quote with confidence.

21/08/2026

Managing who is travelling on company transport, site shuttles or organised trips can be difficult when there isn't a fixed access control hardware available.

MobileGuard brings GuardPoint10 directly onto the vehicle.

Using a vehicle-mounted Android tablet or compatible mobile device, passengers can present their RFID card, MobileKey or QR credential as they board. MobileGuard checks their details against GuardPoint10, helping staff confirm that the individual is authorised to travel while recording their check-in.

Each credential scan can update the user's location within GuardPoint10, providing a clear record of who has checked in and helping operators track passengers and monitor vehicle occupancy.

And because transport doesn't always have reliable connectivity, MobileGuard can download the system database for offline operation. If Wi-Fi or mobile data is lost, the app can continue operating and automatically synchronise with GuardPoint10 when the connection is restored.

19/08/2026

Bit of behind-the-scenes work from our side.

Today we've been carrying out firmware updates on our IC500NX and IC1000NX series controllers to ensure compatibility with PAC readers. It’s not the flashiest thing to post about, but it’s the sort of work that matters on real jobs.

Not every site is a brand-new install with everything matching perfectly. Sometimes the job is about making the existing kit work with what’s already on site.

19/08/2026

Old hardware. New platform.

One of our installers upgrading a long-standing GuardPointPro system to GuardPoint10.

The important bit? The existing door controllers can stay exactly where they are.

GuardPoint10 has been designed to work with our legacy Sensor hardware, including controllers that have been reliably running sites for decades. That means customers can modernise their access control software without automatically having to replace perfectly good hardware across the building.

Less disruption. Less waste. Lower upgrade costs. And a much easier route from GuardPointPro to GuardPoint10.

Upgrade the platform, not the whole installation.

13/08/2026

StudioGuard Tour turns an Android phone into a simple patrol tracking device.

Guards can:

• Tap NFC tags at each checkpoint
• Record GPS location and timestamps
• Add photos and notes while on patrol
• Create a clear record of the completed route
• Automatically send a full patrol report when finished
Ideal for sound stages, workshops, offices, loading bays, backlots, car parks and perimeter patrols.

Take a look at StudioGuard Tour:
https://www.studio-tour.co.uk/

12/08/2026

Our Guardpoint10 software supports integration with Suprema’s BioEntry W3 facial readers, for a simple, convenient and secure biometric access control solution.

Built for secure data protection, the BioEntry W3 is a next-generation facial authentication access control device powered by Suprema’s AI technology. Its deep-learning NPU delivers fast, highly accurate facial recognition, while a slim, compact design ensures durability against impact and harsh conditions.

We also support integration with other Suprema products including the BioStation3, Facestation F2 and BioLite N2.

GuardPoint10 offers full integration, meaning no additional software is required for setup or synchronization. All configuration, management, and syncing are handled through a single, unified software platform.

Considering biometric readers for an upcoming job? Get in touch today for practical guidance, case studies, and product information to help you quote with confidence.

17/07/2026

'Entry' level doesn’t have to mean bare bones.

With our free GP10-Entry software licence, you get capacity for up to 2,000 cardholders and 32 readers, plenty for most smaller sites. Plus, you’ll also get Badge Printing, T&A, Roll Call, ANPR, Reports, Alarm Management, Suprema Biometrics, Global Reflexes, 3 Graphical Maps and HikVision/Dahua NVR support included as standard.

And if the site’s needs grow you can add modules later as required, meaning you only pay for the features you need.

No need to over-spec it on day one, but you’re not boxed in later either.

GuardPoint10 is user friendly with near infinite scalability; add our high-level integrations delivered through modules, and you have a near 'do it all' solution.

Sensor Access - delivering real world solutions to real world requirements.

13/07/2026

Our new website is now live.

We’ve given it a fresh look and made it easier to find what you need, as well as adding the new online store page. Our customers can now browse selected products, and order readers, cards, fobs, and other access control hardware directly through our website.

Check out the new site here:
https://www.sensoraccesscontrol.com/

Advanced, integrated security solutions that unite smart Access Control, Monitoring and Management - Security, made easy.

09/07/2026

Some new kit from DOM just in.

We’ll be getting this lot configured for an upcoming GuardPoint10 installation, including DOM ENiQ Guard handles, Bridge and mesh hubs. Good option for cases where running cable is awkward or just not worth the hassle.

Our tech team is working on getting it set up, tested and talking to GP10 before it goes out to site.