C.G. Engineering

12/09/2026

More line boring for me, we had 2 demolition grab bars that wore completely knackered and needed a lot of machining and welding to get back to perfect.

Remember, play in pins and buses creates cracks that lead to major failure so give me a call and we will get it sorted.

14/06/2026

Merlo headstock in need of some love, this headstock was past specification for loler testing, after my work it was back to brand new. Give me a call if you need any machinery repairs 👍

21/04/2026

Worn out axle pivots on an agricultural trailer needed repairing, no problem. Everything is done in-house with new pins. Now it's back to new condition.

Get in touch if you have any major repairs that need doing 👍

30/03/2026

30/03/2026

Line boring service now available at C.G. Engineering.

Repairing worn out holes back to factory specification.

If you are interested in this service don't hesitate to call or message me today 📞 07341839627 📞

27/02/2026

New Holland telehandler with a coolant leak found a leaking freeze plug due to no antifreeze and water corrosion, new set of freeze plugs and a coolant flush with the correct antifreeze the machine was good to go.👌

27/02/2026

Emergency!! Jake Crane mount broke when the top bolt failed, after loads of preparation it was welded thoroughly and sent back to work. 👨‍🏭🥽

21/11/2025

Customer says his Bateman sprayer is hard to start, after some tests we found the mechanical lift pump sucking in air, new lift pump fitted and all is well 👌

21/11/2025

We made a custom headstock for a grab rotator a couple of weeks ago, it's nice to see the CNC plasma earn it's keep👍

21/11/2025

Getting used to working in the dark now winter is upon us, this JCB needed a new drive coupling so the engine had to come out. They pack these machines in tight !!