Corroless Eastern Ltd

09/03/2026

The concrete factory floor in Norfolk was worn and dusting, with exposed aggregates and cracking visible across the surface. As part of the installation of new equipment, a durable and easy to clean epoxy resin flooring system was required to provide a hard-wearing industrial floor finish.

The concrete factory floor in Norfolk was worn and dusting, with exposed aggregates and cracking visible across the surface.

05/01/2026

A glass fused to steel effluent tank in Buckinghamshire was experiencing significant leakage due to corrosion and perforations within the gas space. Temporary patch repairs had been attempted previously, but the client required a long-term industrial tank lining solution that would ensure full containment and protect the structure against further degradation. READ THE FULL CASE STUDY BELOW

An end of service life pressure vessel gets a new protective coating system. We applied a high build solvent free polyurethane coating.

05/01/2026

The existing protective coatings on the pressure vessel had reached the end of their service life, resulting in visible pitting, laminate corrosion and reduced long-term corrosion protection.
Because the vessel is in an area with active chemical processes, the steelwork had become contaminated with chemical salts, increasing environmental corrosivity and accelerating deterioration.

To maintain safe operation and prevent further structural degradation, the client required a complete replacement industrial protective coating system engineered for harsh, high-corrosivity environments. READ THE FULL CASE STUDY BELOW

An end of service life pressure vessel gets a new protective coating system. We applied a high build solvent free polyurethane coating.

29/09/2025

Unfortunately, we still have a hardware issue with our phone system which is looking to be resolved on Friday. If you are trying to contact us, please use your contacts mobile number or email the office on [email protected] and we will call back.

09/09/2025

The new aquaculture farm had 10 pre cast concrete tanks that required a polyurea tank lining in order to provide protection to the fish that would be contained within them. We proposed the application of a WRAS approved polyurea from VIP Coatings. Find out more https://www.corrolesseastern.co.uk/polyurea-aquaculture-tank-linings-scotland/

12/08/2025

Upon opening the anaerobic digester to remove grit our client found that the existing tank lining was in a very poor condition, with extensive blistering and breaks that had allowed the concrete to be attacked and degraded because of exposure to hydrogen sulphide/biogenic sulphuric acid.

https://www.corrolesseastern.co.uk/anaerobic-digester-tank-relining-cornwall/

We proposed the removal of an existing failed tank lining and application of Sika CR7000 tank lining

19/05/2025

The new Braithwaite sectional tank required a lining suitable for immersion in 60 Degree Centigrade demineralised water. The tank externals also required a suitable protective coating.

The new Braithwaite sectional tank required a lining suitable for immersion in 60 Degree Centigrade demineralised water.

15/04/2025

The originally applied protective coating/screed to the tank base has largely failed. Anecdotally this was thought to be as a result of lack of surface preparation prior to tank lining application.

The originally applied protective coating/screed to the tank base has largely due to lack of surface preparation.

14/04/2025

The fat bund had been identified as a risk during an environmental audit and a suitable bund lining being required to reduce this risk.

The fat bund had been identified as a risk during an environmental audit and a suitable bund lining being required to reduce this risk.

09/04/2025

// Anaerobic Digester Repair and Tank Lining case study //
The Anaerobic Digester had previously been lined internally with a membrane system that extended over the top of the tank walls. Unfortunately Hydrogen Sulphide rich gas had been able to enter beneath this membrane, allowing biogenic sulphuric acid to form beneath resulting in attack and degradation of the tank structure.

The Anaerobic Digester had previously been lined internally with a membrane system that extended over the top of the tank walls.

16/03/2025

The existing resin flooring in the form of an epoxy screed was worn, meaning that it was holding dirt and its original skid resistance had been worn away.

The existing resin flooring in the form of an epoxy screed was worn, meaning that its original skid resistance had been worn away