Klover UK

Call Directions Website

Klover UK Klover manufacturer a distinctive range of MCS accredited pellet boilers and stoves.

The quality engineering and simplicity make Klover pellet boilers reliable, robust and very efficient.

🔧 TECHNICAL TUESDAY – A CLOSER LOOK🔥 The Cast Iron BrazierThe brazier is where the magic happens! It's the heart of a pe...
17/11/2026

🔧 TECHNICAL TUESDAY – A CLOSER LOOK

🔥 The Cast Iron Brazier

The brazier is where the magic happens! It's the heart of a pellet stove's combustion system.

Pellets are fed into the brazier, where they are ignited and burned. Air is supplied through carefully positioned holes in the brazier to support combustion and maintain a clean, efficient flame.

There are two common types:

1. Standard Brazier
A fixed cast iron brazier where pellets accumulate and burn. During normal operation, ash and combustion residue gradually build up, so regular cleaning is essential to maintain good airflow and reliable operation.

2. Automatic Cleaning Brazier
Designed to reduce the amount of manual cleaning required. At programmed intervals, the stove carries out a cleaning cycle, removing ash and burnt residue from the brazier, ready for the next combustion cycle.

Why is it important?

A clean brazier is essential for good combustion. Blocked air holes or excessive ash build-up can lead to poor ignition, unstable flames, increased soot and reduced efficiency.

Whether standard or automatic, the brazier plays a vital role in keeping your pellet stove burning correctly.

🔧 TECHNICAL TUESDAY – A CLOSER LOOK🔥 The Ignition ElementEver wondered how a pellet stove lights itself?The ignition ele...
10/11/2026

🔧 TECHNICAL TUESDAY – A CLOSER LOOK

🔥 The Ignition Element

Ever wondered how a pellet stove lights itself?

The ignition element is responsible for starting the fire. It works in a similar way to an electric heating element, generating intense heat to ignite the pellets.

When the stove starts, pellets are fed into the brazier and the ignition element heats the air passing through it. This hot air is directed towards the pellets until they reach ignition temperature and begin to burn.

Once the flame is established, the ignition element switches off and the stove continues to operate automatically.

A common cause of ignition problems?

A worn or failed ignition element can prevent the stove from lighting correctly. However, poor pellet quality, restricted airflow and a dirty brazier can also cause ignition issues.

A small component, but essential to getting your stove up and running!

Out with the old, in with the new!Klover Belvedere 18 installed today by Chamings LtdProviding all the home's central he...
04/11/2026

Out with the old, in with the new!

Klover Belvedere 18 installed today by Chamings Ltd
Providing all the home's central heating and hot water needs, with efficient biomass heating.

Another great installation! 👏

Turn it on. Let Klover do the rest.Klover Wood Pellet Stoves - Smart heating, Less effort.
05/10/2026

Turn it on. Let Klover do the rest.

Klover Wood Pellet Stoves - Smart heating, Less effort.

04/10/2026
Another successful installation by MCA Renewables - well done, nice work 👏 They installed an Eompact 290S wood pellet bo...
03/10/2026

Another successful installation by MCA Renewables - well done, nice work 👏

They installed an Eompact 290S wood pellet boiler in this outbuilding, providing an efficient and practical renewable energy solution. 🌱

🔥 Yes, you can still have a woodburning boiler stove in the UK.We provide a range of woodburning boiler products, includ...
02/10/2026

🔥 Yes, you can still have a woodburning boiler stove in the UK.

We provide a range of woodburning boiler products, including the Altea, Belvedere and Dual.

One of the key technologies behind Klover's woodburning products is SICURO TOP.

💧 SICURO TOP uses a bain-marie principle, allowing the boiler itself to operate at atmospheric pressure, similar to the way a traditional open-vented system uses a header tank in the loft, but with the water reservoir built inside the boiler.

The home's heating system can remain a closed, pressurised circuit, complete with an expansion vessel. This provides an additional level of safety and makes integration with existing heating systems much simpler and more efficient.

🔧 Hydraulic components built in
Klover's boiler stove models come with an integrated hydraulic kit and circulation pump, reducing the amount of additional equipment required and helping to make installation simpler and more compact.

🔥 Wood heat. Modern technology. Simpler installation.
If you're considering a woodburning boiler stove, get in touch with Firepower. We can help with the appliance, system design and the technical requirements for your installation.

📞 0800 246 1260
🌐 Firepower.co.uk

The Klover Heart is now on display at Simply Stoves. 🔥Doesn’t it look fabulous? 🫶Pop in and take a look for yourself!
28/09/2026

The Klover Heart is now on display at Simply Stoves. 🔥

Doesn’t it look fabulous? 🫶

Pop in and take a look for yourself!

Sicurotop (fitted to all log boilers)
14/09/2026

Sicurotop (fitted to all log boilers)

14/09/2026

Address

Firepower, Flightway, Dunkeswell Business Park
Dunkeswell
EX144RD

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+448002461260

Alerts

Be the first to know and let us send you an email when Klover UK posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby businesses