Top Tip Cue Repairs by Walter Bruce

Top Tip Cue Repairs by Walter Bruce Tips and ferrules fitted and minor cue repairs. Pelaw NE10.

Three cues done for Graeme Bentham.The first cue was taken down from 10mm to 9mm and fitted with a soft elk master tip.T...
17/06/2026

Three cues done for Graeme Bentham.
The first cue was taken down from 10mm to 9mm and fitted with a soft elk master tip.
The second cue had the same done as the first as well as being re grained.
The third cue had a medium elk master tip fitted and the ferrule tied up.
The third cue used to be a two piece and someone had taken the joint out and put a dowel in to make it a one piece.it was like a banana so i took it apart and relined it.
All the cues were given a total refurb.

Two cues done for Kyle Gibson.The first cue had a soft tip from Highland Pro Cue Tips fitted and a titanium ferrule.The ...
16/06/2026

Two cues done for Kyle Gibson.
The first cue had a soft tip from Highland Pro Cue Tips fitted and a titanium ferrule.
The second cue was also fitted with a soft tip from highland pro tips.
Both cues were given a total refurb.

A cue done for Kevin George.The cue was fitted with a new ferrule and a century g2 tip.It was then given a total refurb.
16/06/2026

A cue done for Kevin George.
The cue was fitted with a new ferrule and a century g2 tip.
It was then given a total refurb.

A cue done forConnor Andrew Lightbody.The cue had a 7.4mm tip and Connor wanted it made to 8mm.Half an inch was taken of...
14/06/2026

A cue done forConnor Andrew Lightbody.
The cue had a 7.4mm tip and Connor wanted it made to 8mm.Half an inch was taken off the length and a 8mm ferrule fitted with a century g2 tip which connor supplied.
The cue was then given a complete refurb.

Stevie Pine brought a cue that belongs to his brother Iain.The cue had a soft tip from Highland Pro Cue Tips fitted and ...
14/06/2026

Stevie Pine brought a cue that belongs to his brother Iain.
The cue had a soft tip from Highland Pro Cue Tips fitted and reduced the height of the ferrule.
Stevie also asked if i could repair two of the chevrons on the shaft that had previously been repaired by someone who should have went to spec savers.
Whoever done the repair had used what looked like super glue.That was removed and repaired with wood glue.
The cue then had a total refurb.

A century g2 tip fitted for Jamie Lee and a quick clean up
13/06/2026

A century g2 tip fitted for Jamie Lee and a quick clean up

Three cues done for Paul Mcelvanney.The first cue was fitted with a medium tip fromHighland Pro Cue Tips and a new ferru...
13/06/2026

Three cues done for Paul Mcelvanney.
The first cue was fitted with a medium tip fromHighland Pro Cue Tips and a new ferrule. The second cue had a halo super soft tip fitted and the third one had a halo medium tip fitted.
Paul supplied the halo tips.

A cue done forChris Roberts.The cue was fitted with a medium tip from Highland Pro Cue Tips and the ferrule was tided up...
13/06/2026

A cue done forChris Roberts.
The cue was fitted with a medium tip from Highland Pro Cue Tips and the ferrule was tided up.
The cue also had a total refurb.

A cue done for Tom Siddorn from Devon.This cue was taken down from 9.5mm to 9mm and fitted with a medium tip from Highla...
11/06/2026

A cue done for Tom Siddorn from Devon.
This cue was taken down from 9.5mm to 9mm and fitted with a medium tip from Highland Pro Cue Tips.
The cue was also given a total refurb. The lacquer was removed from the cue then re grained oiled and polished.
It’s now waiting on the courier to be taken back to Devon.

A century g2 tip fitted for hylton.
10/06/2026

A century g2 tip fitted for hylton.

Address

Pelaw Ne10
Gateshead

Website

Alerts

Be the first to know and let us send you an email when Top Tip Cue Repairs by Walter Bruce posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category