Atlas Copco UK & Ireland

Atlas Copco UK & Ireland Atlas Copco in the UK & Ireland provides efficient solutions in compressors, vacuum, generators, ind

Production data is often used to review performance after the event. Increasingly, it is used to identify issues before ...
24/06/2026

Production data is often used to review performance after the event. Increasingly, it is used to identify issues before they affect output. By applying analytics and AI to tool and process data, patterns can be identified that indicate emerging faults or quality risks.

Discover how to use data proactively: https://bit.ly/4nD2a8n

As demand for AI continues to grow, data centre infrastructure is being built and scaled faster than ever.This creates n...
23/06/2026

As demand for AI continues to grow, data centre infrastructure is being built and scaled faster than ever.

This creates new challenges across assembly, from maintaining consistent fastening quality, to managing variation in manual processes, and meeting increasing requirements for traceability and control.

Atlas Copco supports data centre assembly with precision tooling and connected systems, helping manufacturers scale production while maintaining quality, reliability and performance.

Explore the full article to see why assembly quality matters in data centre infrastructure: https://bit.ly/4uxRtpb

Unplanned tool failures are often driven by reactive maintenance and fixed service intervals that don’t reflect actual u...
19/06/2026

Unplanned tool failures are often driven by reactive maintenance and fixed service intervals that don’t reflect actual usage. With ToolCover, supported by ALTURE Maintain, maintenance is based on real tool data, reducing failures, avoiding unnecessary servicing, and improving availability across the line.

Improve tool reliability with data-driven maintenance https://bit.ly/4viZxM0

18/06/2026

Whether it’s EV battery modules, power electronics, or control units, excess heat can lead to degradation, failure, or in extreme cases, thermal runaway.

To safeguard performance, liquid thermal interface materials (TIMs) are increasingly used to efficiently dissipate heat.

Discover dispensing solutions for series production of electronic components that require low volumes and short cycle times.

https://www.atlascopco.com/en-uk/itba/plp/dispensing-potting-bonding/thermal-management?utm_source=linkedin&utm_medium=organic&utm_campaign=ELDUK&utm_content=consideration

We're back for day two of Global Offshore Wind 2026.After a busy first day, it’s been great to connect with so many team...
17/06/2026

We're back for day two of Global Offshore Wind 2026.

After a busy first day, it’s been great to connect with so many teams across the offshore wind sector and discuss the challenges around control, traceability and performance in the field.

Across our Smart Field portfolio, we’re continuing to showcase how high‑torque tightening and connected data can support more consistent, efficient offshore operations.

If you’re attending today, there’s still time to visit us on stand A14 and speak with the team.

Day 1 of RenewableUK Global Offshore Wind 2026 is coming to a close.We’ve been on stand A14 connecting with teams across...
16/06/2026

Day 1 of RenewableUK Global Offshore Wind 2026 is coming to a close.

We’ve been on stand A14 connecting with teams across the industry and exploring how connected bolting solutions are supporting offshore wind operations.

From high‑torque tightening tools to our Bolting Cloud, we’re showcasing how improving control, visibility and traceability can support more efficient and reliable work in the field.

If you’re attending tomorrow, stop by stand A14 and say hello.

There’s less than a week to go until Global Offshore Wind 2026! We’ll be showcasing high‑torque tightening solutions des...
12/06/2026

There’s less than a week to go until Global Offshore Wind 2026!

We’ll be showcasing high‑torque tightening solutions designed to deliver precise, repeatable performance across demanding offshore applications. With greater control at higher loads, operators can achieve better joint integrity and more reliable outcomes.

Be sure to join us on stand A14 to see our high-torque tooling in action: https://bit.ly/3RytM2d

High volumes, tight tolerances and limited buffers leave little room for disruption. Maintaining output requires visibil...
11/06/2026

High volumes, tight tolerances and limited buffers leave little room for disruption. Maintaining output requires visibility, controlled processes and systems that respond quickly when conditions change.

See how stable systems protect production https://bit.ly/4nD2a8n

Choosing an air motor early in the design process can remove a lot of risk later on.Atlas Copco air motors are backed by...
10/06/2026

Choosing an air motor early in the design process can remove a lot of risk later on.

Atlas Copco air motors are backed by ready-to-use CAD files, ATEX-compliant options, and a broad range of standard models to help design teams move forward with more confidence. If you are working on a new build or reviewing an existing specification, it is worth checking what is possible before designs are locked in.

Explore the air motor selector tool: https://www.atlascopco.com/en-uk/itba/industry-solutions/airmotors/air-motor-selection-tool?utm_campaign=?utm_source=linkedin&utm_medium=organic&utm_campaign=OEMUK

Last week, our General Manager James McAllister was invited to speak at Tech Forum 2026, hosted by the Swedish Chamber o...
09/06/2026

Last week, our General Manager James McAllister was invited to speak at Tech Forum 2026, hosted by the Swedish Chamber of Commerce for the UK, where the focus was on how industries such as Formula 1 are applying advanced technologies.

Joined by Anders Winkler from Hexagon AB, James took part in the panel 'Racing for Precision: High-Speed Innovation in Manufacturing – A Case Study on Formula 1'. The discussion focused on how Red Bull Ford Powertrains is applying advanced manufacturing technologies, and how Atlas Copco’s data-driven solutions are supporting their manufacturing processes and enabling improved precision and reliability.

Across the event, conversations reflected a shift with AI and automation, moving from early adoption into full integration, helping manufacturers improve performance, efficiency and decision-making.

Address

Hemel Hempstead
HP27EA

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+448456010001

Website

Alerts

Be the first to know and let us send you an email when Atlas Copco UK & Ireland posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Atlas Copco UK & Ireland:

Shortcuts

Share