Path-50, Unit3 first floor , 217 Marsh Wall, London (2026)

16/10/2026

Myth 1: "You can't open the windows in a passive home."

The Reality: You can open your windows whenever you want! The difference is that you don't need to open them to get fresh air. The Mechanical Ventilation with Heat Recovery (MVHR) system continuously supplies pre-filtered, oxygen-rich fresh air 24/7 without losing indoor warmth or letting in dust and allergens.

Myth 2: "Passive houses feel stuffy and dark with tiny windows."

The Reality: It’s actually the exact opposite. Passivhaus designs heavily rely on solar heat gain, which means large, high-performance triple-glazed windows, often facing south that flood the interior with natural light while keeping cold drafts completely out.

Myth 3: "They are way too expensive to build."

The Reality: While upfront construction costs can be slightly higher, the long-term energy savings of up to 90% on heating drastically offset that initial investment. Over time, a passive house is significantly cheaper to run.

Myth 4: "Passive homes overheat during the summer."

The Reality: Smart passive design accounts for all seasons. Strategic shading (like roof overhangs or exterior blinds) keeps the intense summer sun out, while the thick insulation and ventilation keep the interior comfortably cool, even during heatwaves.

Myth 5: "Passivhaus technology is too complex and hard to operate."

The Reality: A passive house is designed to work passively, meaning the building fabric itself does most of the heavy lifting. Once calibrated, the systems require minimal tweaking, leaving you with simple, maintenance-free comfort year-round.

Let’s clear the air! Heavy insulation and high efficiency don’t mean living in a sealed box.

05/10/2026

Another milestone unlocked on the site!
We’ve officially started the next phase: tying up the rebar to lock in the structural cage!
Every single piece of steel is being hand-secured with tie wire so everything stays rock-solid.
Once this rebar grid is locked in, up next... the big concrete pour!
Guess how many trucks it's going to take to fill this up! Leave your guess in the comments!

16/09/2026

Ever wondered how we prove a house is truly energy efficient?
Enter the Blower Door Test, the ultimate reality check for any Passivhaus project!
During this test, we temporarily seal the main door and install a giant fan to measure air leakage. By depressurizing the home, we can spot even the tiniest hidden drafts using thermal imaging and smoke pens.
Here is why this step is a game-changer for PATH-50:
• Zero Drafts: Guarantees absolute airtightness so no warm air escapes in winter.
• Peak HVAC Efficiency: Allows our ventilation system (MVHR) to work at 100% efficiency.
• Lower Energy Bills: Stops heat loss before it ever starts, keeping operating costs ridiculously low.
• Quality Assurance: Proves that our construction standards aren't just promises, they are measured and certified.
Building green isn't about guessing; it's about testing!

08/09/2026

Measure twice, dig once!
Just another day on site with the PATH 50 team doing what we do best - staying focused, precise, and fully prepared for every job.

04/09/2026

We recently shared the exciting news that our Path-50 project is complete, but we haven't talked enough about the incredible place it calls home.
This new, energy-efficient and sustainable house isn't just built green, it's perfectly nestled in an environment designed for a sustainable life.
We are so proud to have created a home that is truly in harmony with its natural surroundings.
Beyond its green walls, this community offers:
*Fresh, clean air
*Mindful, native landscaping
*Excellent connectivity to sustainable paths
*An eco-conscious community
It’s where high-tech efficiency meets low-impact living. Comfort and peace of mind, without compromise. We love seeing our vision for sustainable living come to life!

24/08/2026

Laying the groundwork for a smarter, energy-efficient build!
By pairing heavy-duty steel rebar with continuous sub-slab insulation, this foundation forms an unbroken thermal barrier. This setup prevents ground cold from seeping into the structure, eliminates thermal bridging, and drastically cuts long-term heating and cooling demands.
True sustainability starts long before the concrete even pours.

04/08/2026

Ever walked into a room made of natural wood and instantly felt like taking a deep breath? That’s not an accident, that’s the power of Cross-Laminated Timber (CLT).
Think of CLT as giant, super-strong wooden building blocks. By gluing layers of wood together in alternating directions, we get a material that’s as strong as steel and concrete, but way better for us and the planet.
Why we’re obsessed with mass timber right now:
*It’s good for the planet: Trees absorb carbon while growing. When we build with wood, that carbon stays locked away inside the building instead of going into the air.
*It feels like nature indoors: Exposed wood naturally calms our nerves, makes spaces cozy, and improves indoor air quality.
*Quiet & fast to build: Because the panels are cut to perfect size in a factory, assembling a building is quiet, clean, and surprisingly fast, like giant LEGO for architects!
*Warm and energy-smart: Wood keeps heat inside much better than concrete, keeping homes cozy and energy bills lower.
We’re moving away from cold, gray cities and building a future that feels a bit more warm, natural and human.
Would you live in a high-rise made of wood? Let us know below!

14/07/2026

Most homeowners get retrofit sequencing wrong.
They spend thousands on a heat pump or solar panels, but leave the old windows, leaky walls, and countless draughts untouched.
It's a bit like trying to heat your home with the front door half open.
No matter how efficient your heating system is, you're still losing a huge amount of heat.
That's why the order of improvements matters.
The most successful retrofits follow a Fabric First approach:
1. Improve the building fabric
Upgrade wall, roof and floor insulation.
Replace inefficient windows and doors.
Improve airtightness by sealing unwanted gaps and leaks.
2. Add proper ventilation As homes become more airtight, fresh air becomes increasingly important. A well-designed ventilation system helps maintain healthy indoor air quality while controlling moisture and condensation.
3. Upgrade the heating system Only once the home's heat demand has been reduced should you consider a heat pump or other low-carbon heating system. A better-performing building requires a smaller, more efficient heating system, reducing installation and running costs.
This approach delivers more comfort, lower bills, better air quality, and better value for money.
The biggest mistake isn't choosing the wrong technology.
It's installing the right technology at the wrong time.
Thinking about renovating your home? Make sure your retrofit strategy starts with the building fabric and not the heating system.

LowEnergyHomes SustainableBuilding BuildingPerformance Airtightness

29/06/2026

Stop burning cash. Start tapping into the earth.
A lot of people hear about ground source heat pumps and think:
“How can 10°C from the ground possibly heat my house?”
Fair question. The truth is it doesn’t. Not directly.

So what’s actually going on?
The ground gives you a steady source of low‑grade heat usually somewhere between 8 and 13°C, depending on the depth, the soil and the local conditions.
That temperature on its own is useless for heating a house.
What matters is what happens next.
The heat pump takes that low-level energy and lifts it.
It pulls heat out of the ground, passes it through a refrigerant, and then compresses it which raises the temperature to something you can actually use for heating and hot water.
So you’re not heating your home from 10°C.
You’re taking stable background energy and upgrading it into proper, usable heat.
One important thing people often miss: the lower the temperature your system needs to run at, the better the whole thing works.

What does it feel like to live with it?
It’s very different from a boiler.
No bursts of heat. No cycling on and off. No hot then cold.
Just a steady, even temperature across the whole house.
It works particularly well with radiant systems like wall heating or ceiling panels where heat is delivered gently through surfaces rather than pushed around with air.
The result is simple: the house just feel right!
Not stuffy, not dry, not uneven. Just comfortable.

And in summer?
It flips. Instead of bringing heat in, it takes excess heat out of the house and sends it back into the ground.
That gives you a softer kind of cooling, not air-con blasting cold air at you, just keeping the house from overheating.
At the same time, you’re doing something useful in the background:
you’re putting some of that heat back into the ground after winter.
So over time, the system stays balanced instead of being constantly drained.

At PATH‑50, that’s exactly what we focus on, not just installing systems, but getting the whole building right so it actually delivers comfort in real life, not just on paper.

22/06/2026

Thinking about upgrading your home’s heating and cooling?
Meet the Air Source Heat Pump, the eco‑friendly game changer.
Simply put, an ASHP extracts heat from the outside air (even in winter) and brings it indoors to warm your home. In summer, the process reverses, helping to maintain comfortable indoor temperatures. A smart, efficient 2‑in‑1 system.

But here’s what really matters and what most people overlook:
A heat pump is only as good as the system delivering that energy inside your home.
The distribution strategy is what defines comfort, performance and long‑term value.

There are three main approaches:
* Underfloor heating (UFH)
* Fan coil units (similar to air conditioning)
* Wall and ceiling systems (radiant heating & cooling)

The key principle:
Heat pumps don’t compensate for poor buildings, they amplify good ones.
To achieve real efficiency, comfort, and running cost savings, the property itself must be designed accordingly:
-High levels of insulation
-Airtight construction
-Quality glazing
-Well-integrated ventilation

Why does it matter?
Because when done right, a heat pump system delivers:
-Lower energy costs
-Reduced carbon impact
-Heating and cooling in one integrated system
-A more stable, comfortable indoor environment
-Stronger long-term property value

At PATH‑50, we take a different approach.
We don’t just install heat pumps.
We design homes that maintain perfect comfort all year — with minimal energy use..
From early concept to final installation, every decision is aligned to deliver efficiency, comfort, and long-term value.

If you’re considering a heat pump, the question isn’t just what system to install but how the whole building will perform.
Let’s get it right from the start.
Get in touch to discuss your project or book an energy assessment.

HeatPump PATH50

Path-50

16/10/2026

05/10/2026

16/09/2026

08/09/2026

04/09/2026

24/08/2026

04/08/2026

14/07/2026

29/06/2026

22/06/2026

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Listing takedown request