Bastek Services Ltd, Butely Road, Luton (2026)

09/09/2026

Car park barrier fault diagnosed and repaired — same day ✅

A local customer contacted us after experiencing ongoing problems with their car park barrier.

Their usual service provider is based in the Midlands, meaning they can sometimes wait weeks for an engineer to attend. They had also been advised that the barrier’s safety device needed replacing, with a repair cost quoted at over £1,000.

We attended the same day and carried out our own fault-finding.

The safety device itself wasn’t faulty.

The actual problem was a failed power supply feeding the safety equipment.

Once correctly diagnosed, we were able to repair the barrier during the same attendance — at a fraction of the previously quoted cost.

The customer was understandably very pleased with the quick response and, most importantly, an honest diagnosis.

🔧 Car park barrier repairs
⚡ Electrical fault finding
🛡️ Safety device testing
📍 Local responsive service across Bedfordshire and surrounding areas

Sometimes the most important part of a repair isn't replacing parts — it's correctly identifying what has actually failed.

BASTEK Services Ltd
Gate Automation | Barriers | Access Control | Door Entry

05/09/2026

Preparation is everything on bigger gate projects. 👷‍♂️

A lot of the work on a project like this happens before the gate even arrives on site.

For this installation, the foundation concrete blocks and underground ducts were prepared in advance to precise drawings and measurements.

That planning paid off — once the gate arrived, the mechanical installation was completed within just a few hours.

Next stage is wiring, safety equipment, setup and final commissioning.

Good preparation means:

✅ Less time on site
✅ Less disruption for the customer
✅ Fewer unexpected problems
✅ A smoother and more efficient installation

Another great example of why careful planning is such an important part of larger gate automation projects.

29/08/2026

Work in progress 👀

Another aluminium sliding gate installation taking shape, supplied and installed by the BASTEK Services Team, with the gate manufactured by Aligates Aluminium Gates.

What makes this installation a little different is what you don’t see.

Instead of a conventional sliding gate motor mounted alongside the gate, we’ve used a Roger Technology “naked” motor, concealed neatly inside the gate post.

This gives the installation a much cleaner finish, with the automation largely hidden from view.

The system also includes an Akuvox intercom, providing convenient and modern visitor access.

✅ Aluminium gate by Aligates
✅ Roger Technology concealed automation
✅ Akuvox intercom
✅ Clean and discreet installation
✅ Supplied and installed by BASTEK Services

20/07/2026

Need expert metalwork repairs without the hassle of dismantling your gates or barriers? We come to you. 🛠️⚙️

At BASTEK Services, we offer full on-site welding services across our region. Whether it’s a cracked hinge on an automated gate, structural repairs to security fencing, or custom modifications to car park barriers, our equipped mobile units get the job done quickly and safely with minimal disruption.

🔧 What we fix on site:
- Gate frame & hinge repairs
- Security barrier & post welding
- Structural metalwork & bracketry
- Emergency structural fixes

Fully compliant, insured and backed by 20 years of industry experience.

📲 Contact us today for a quick quote or emergency call-out!
🌐 www.bastek.co.uk
📞 01582 321 312

11/07/2026

Out with the old, in with the secure. 🚧✨

We have just completed a total car park barrier upgrade for a client in Bushey! We swapped out an old, unreliable, broken barrier for the heavy-duty CAME GT8 automated system.

To give this site the ultimate modern upgrade, we paired it with:

👉 BEA Evoloop Smart Radar: Cutting-edge radar technology providing flawless vehicle detection and safety compliance—without the need to cut disruptive ground loops into the tarmac.

👉 Cloud-Managed Access: Integrated a secure, remote-managed receiver and code keypad. The site managers can now update access codes, track entry, and manage security completely remotely from anywhere.

Fully installed, tested, and UKCA certified to the highest safety standards by the BASTEK team. 🛠️

Looking to upgrade your commercial site’s perimeter security or access control? Get in touch today!

09/07/2026

Protecting Business Entrances: It's a Year-Round Job

It might be 30°C today, but winter leaves its mark long after the snow melts.

The "rotten threshold" you see here isn't a result of sun or rain – it's the aftermath of winter salt spreading, eating away at this metal frame.

On the photo, you can see the corrosion that was compromising this entrance. Our team at BASTEK Services just completed this clean, professional replacement, ensuring this entrance is sound, safe, and ready for whatever the next season brings.

Don't wait for total failure. Proactive maintenance on commercial entrances is essential.

Need a door expert? Get in touch with BASTEK Services.

09/05/2026

Why cutting corners on site safety costs more in the long run. 🛠️

We see it often: one-way flow plates bolted directly into tarmac to save on initial costs. While it might look fine on day one, tarmac simply isn't designed to hold those fixings under the constant stress of vehicle weight.

At Bastek Services Ltd, we believe in doing the job properly. For this recent project, our process ensured a long-term solution:
* Tarmac removed: We clear the area to create a solid foundation.
* Concrete pad prepared: A reinforced base ensures the plates stay level and secure.
* Plates supplied and installed: High-visibility, heavy-duty plates fitted to last.

Don't be tempted to save a few pounds now only to face repair bills and safety risks later. If you want your site infrastructure done properly, get in touch with us for a quote.

02/05/2026

When a Fire Exit Becomes a Trap: The Dangers of Incompetence

Can a manual door be more dangerous than an automated one? Absolutely.

While automated doors often get the most attention, manual doors can become significant hazards through poor design, substandard installation, or "quick-fix" repairs by incompetent contractors. We recently saw this firsthand at a local school.

A Critical Mechanical Failure
The school contacted us to investigate a door that had detached from its hinges. Seeking a second opinion after ongoing issues, they brought us in to assess the situation.

We quickly discovered that a previous contractor had installed the wrong replacement transom closers for this specific aluminium door. The top spindle did not protrude far enough to provide a secure fixing point. As a result, a heavy door in a high-traffic school environment was being held by only a few millimetres of metal. It was a disaster waiting to happen.

The Conflict: Access Control vs. Life Safety
To make matters worse, this was a designated emergency/panic exit. While the push bar was installed to EN 1125 standards (allowing free exit), an access control company had later installed magnetic locks.

To exit the building, a user was required to press a "Request to Exit" button and then hit the push bar. In an emergency, simply pushing the bar would not open the door. This is a direct violation of safety standards. It was clear the previous installers were either unaware of EN 13637 (which governs electronically controlled escape systems) or chose to ignore it.

The Result: Compliance Restored
Fortunately, the school was receptive to our assessment. We took immediate action:

Mechanical Safety: Replaced the transom closers with the correct specification and safely rehung the door.

Fire Safety: Disabled the magnetic locks until they could be integrated correctly with the fire alarm or updated to meet escape regulations.

The door is now safe, operational, and—most importantly—compliant with panic escape regulations.

Our Advice
Do not ignore your manual doors. They require the same level of professional scrutiny as any other safety system. Ensure your contractors understand the specific regulations (EN 1125 / EN 13637) that protect your staff and students.

Get them checked, maintain them regularly, and always use professionals.

15/04/2026

Simple. Effective. Secure. 🔒

A pedestrian gate gas closer is one of the most reliable ways to ensure your site stays secure without the "slam." But longevity is all in the details.

The Golden Rule: Always install a gate stop. 🛑

Opening a gate beyond a 90-degree angle is the fastest way to damage the internal seals and brackets of a gas closer. Correct specification and a restricted opening angle mean a system that lasts for years, not months.

Need a hand with compliant gate hardware? Get in touch with the team at Bastek Services Ltd.

14/04/2026

Enhance your gate system with the Locinox Verticlose-2 Hydraulic Gate Closer.

Designed for gates up to 150kg and 1.5 meters wide, this adjustable and retrofittable gate closer ensures safe and convenient self-closing functionality. With adjustable speed, final snap, and rigorous testing in extreme conditions, the Verticlose-2 is perfect for external gates.

Bastek Services Ltd

09/09/2026

05/09/2026

29/08/2026

20/07/2026

11/07/2026

09/07/2026

09/05/2026

02/05/2026

15/04/2026

14/04/2026

Address

Telephone

Website

Alerts

Shortcuts

Share

Category

Listing takedown request