Pro-Lock Safety Limited

Pro-Lock Safety Limited Established in 2001, Pro-Lock® Safety Ltd supplies the World’s first universal colour coded lockout device. www.pro-lock.co.uk

Pro-lock (UK) Ltd was founded in 2001, primarily to market and sell the patented Pro-lock valve locking device. Pro-lock was conceived by Neil Blair, who remains MD of Pro-lock Safety Limited, our umbrella company, now based in Jersey C.I. Pro-lock was designed to replace any known Valve Lockout system. It's easy to use and "Cost Effective ". Pro-lock was the first colour coded Lockout. It is stan

d alone, but can also support additional security, or fit seamlessly into existing Permit to Work systems. Pro-lock Safety Limited manufacturers are based primarily in the U.K. The Company supplies the Pro-lock system and other misc. Lockout and Tag-out Equipment, directly to the Oil, Gas, and Chemical Industries,

Have we told you about our world leading Biodegradable security seals, no??Well let me tell you now, Pro-Lock being one ...
17/05/2022

Have we told you about our world leading Biodegradable security seals, no??

Well let me tell you now, Pro-Lock being one of the leading providers of 'Lockout Tagout' equipment have once again out done ourselves by introducing a new Biodegradable seal.

These seals are 100% recyclable and will Biodegrade in 1-7 years as opposed to centuries... Now tell me that's not a great new product introduction!!!

To find out more simply visit:
www.pro-lock.co.uk

Or E-mail and request a free sample pack:
[email protected]

05/01/2022

New year, New start... and what better way to start the year than to showcase our first ever Biodegradable security seals which are available in both Red & White.

Here at Pro-Lock we are always looking for new innovate products, products that can resolve problems easier and quicker but also we are conscious about the world we live in and the effects our products have on the environment.

That's why for 2022 we have made a commitment to reduce the amount plastic that use. The first step on this long road is to swap our current security seals over to a more earth friendlier version which will still provide the same level of security.

As we sell a lot of Security Seals this is something we have talked about for a while and finally we have them. They are a like for like with our current seals meaning they have the same breaking point, the same length and flag size and even the 9 digit sequential numbering is the same meaning...

There's no reason you couldn't be more environmentally friendly but swapping your current seals to our New and Amazing Bio Seals!!

To ORDER yours today or request a sample pack please contact:
[email protected]

And to find out more please visit our website:
www.pro-lock.co.uk

25/10/2021

Product of the week...

This week we are showcasing our Large Pro-Lock's. Our Large Pro-Locks are the same in size as the standard the only difference is the diameter of the holes with the Large Pro-Lock being 8.5mm. The reason for this is to accommodate padlocks with a thicker shackle as many site will already have their own padlocks we wanted a Pro-Lock to accommodate them.

WHERE??
Our Pro-Locks can be used in any environment, indoors and outdoors. Over the past 20 years they have been used across multiple different industries such as Oil & Gas, MoD, Food Manufacturing and Utilities to name a few.

WHEN??
Our pro-Locks were initially designed to make the isolation of valves much easier, quicker and cost effective. The Pro-Locks are colour coded to help identify them or their job easily and we would recommend using Pro-Lock's in the isolation of any valve.

WHY??
With the unique colour coding of the Pro-Lock this makes it a great choice for valve isolation as the worker can easily identify what is going on with the valve. As our pro-Lock's are universal and re-usable they can be used to lock off any valve and it makes for a very cost effective and secure way to isolate valve's.

To order yours now visit www.pro-lock.co.uk
or
email your enquiry to [email protected]

18/10/2021

Product of the week...

This week we are showcasing a small selection of our Miniature Circuit Breakers. Our MCB's provide a safe and effective method for locking out circuit breakers.

WHERE??
These Miniature Circuit Breakers can be used on all European circuit breakers. We have a wide variety of MCB's which include Push Button pin-in and pin-out, No Tool and grub screw MCB's.

WHEN??
These MCB's should be used when there is a need to lockout off the power to a certain breaker.

WHY??
The idea is that someone should be able to turn off the power to an appliance to safely work on it. If a person is working in the building on exposed wires you wouldn't want someone else to reactivate the switch which would electrocuting the other person.

To order yours now visit www.pro-lock.co.uk
or
email your enquiry to [email protected]

11/10/2021

Here is the first of our Product Of The Week posts.

Each Monday we are shining the spotlight on a particular product to give you a more detailed look into each product. We will be discussing when the product should be used, where is should be used and why it should be used.

So we are starting off with our very popular Zenex Padlock from Master Lock. This Padlock is ideal for all Lockout Tagout procedures with its non conductive casing which is also chemical and corrosion resistant.

WHERE??
Due to the fact that this padlock is non conductive and can be used in most environments, we would recommend this padlock for most if not all Lockout Tagout procedures.

WHEN??
As this is a safety padlock and not a security padlock we recommend using it only within a Lockout Tagout procedure or safety environment.

WHY??
The Master Lock Zenex padlock has been around for a number of years and to date we haven't heard of any issues with it when being used correctly. It also has a number of great safety features such as key retaining, colour coded, write on safety stickers to name a few.

To order yours now visit www.pro-lock.co.uk
or
email your enquiry to [email protected]

We thought we would make the first blog for the new website about us. It's a quick insight into who we are, what we do a...
07/10/2021

We thought we would make the first blog for the new website about us. It's a quick insight into who we are, what we do and how we have become the go to company for Universal Valve Lockout Device's.

06/10/2021

Here it is our brand new website, we hope you enjoy using it as much as we did designing it...

We've changed the layout, added some new features such as online chat, request a quote and you can even download our latest catalogue all with the click of 1 button...

To have a look please go to www.pro-lock.co.uk and let us know what you think.

Quick Quiz Monday...Here is a small selection of FPSO Vessels we have supplied throughout 2020, we thought it would be f...
11/01/2021

Quick Quiz Monday...

Here is a small selection of FPSO Vessels we have supplied throughout 2020, we thought it would be fun to see if any of our connections could name some if not all of them?

Leave your answers below and we will reveal the vessel names on Friday.

The office is closing today and we just wanted to wish everybody a Merry Christmas and Healthy New Year from the Pro-Loc...
23/12/2020

The office is closing today and we just wanted to wish everybody a Merry Christmas and Healthy New Year from the Pro-Lock team.

Just a reminder to our International customers, are final shipping date to make sure you get your orders before Christma...
14/12/2020

Just a reminder to our International customers, are final shipping date to make sure you get your orders before Christmas is only 2 days away. For the rest of Europe and the UK you have a little more time.

This is A recent article that we came across. Its always helpful to fully understand LOTO procedures and why it is so im...
09/12/2020

This is A recent article that we came across.
Its always helpful to fully understand LOTO procedures and why it is so important to keep them simple.

Employing these techniques can be the difference between a safe, routine maintenance activity and a serious injury.

Just a friendly reminder that our BlackFriday sale is coming to an end in 5 days so get your orders in now to save that ...
07/12/2020

Just a friendly reminder that our BlackFriday sale is coming to an end in 5 days so get your orders in now to save that extra 5%

Address

Poulton Le Fylde
FY68JX

Opening Hours

Monday 9am - 4pm
Tuesday 9am - 4pm
Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 1pm

Alerts

Be the first to know and let us send you an email when Pro-Lock Safety Limited posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share