30/10/2026
Plastic end cap too small? Has it shrunk in the post? 📦😉
Before we investigate mysterious shrinking in the delivery van, let’s check two measurements.
For TREBORK ribbed tube inserts, you need:
✅ The OUTSIDE dimensions of your tube.
✅ The tube’s WALL THICKNESS.
Measuring the inside hole instead of the outside can lead to ordering an insert that is too small.
But the outside size alone isn’t enough either. Two tubes measuring 40 × 40 mm on the outside can need different inserts.
Our 40 × 40 mm options include:
▪️ An insert for wall thicknesses of 1.2–3.0 mm.
▪️ An insert for wall thicknesses of 3.0–5.0 mm.
For example, a tube with a 4 mm wall needs the 3.0–5.0 mm option. It is outside the range of the 1.2–3.0 mm version.
Same outside dimensions. Different wall thickness. Different insert.
If yours is too tight, too loose or disappearing inside the tube, our guide explains what to check:
https://plasticendcaps.co.uk/how-to-measure-for-plastic-end-caps/?utm_source=facebook&utm_medium=social&utm_campaign=fit_guides_2026_10&utm_content=post02_fitcheck
Plastic end cap too tight or too loose? Check tube size, wall thickness and Nominal Bore, with a 40 x 40 mm example and links to the right variants.