York Aerospace & Rocketry - YAR

  • Home
  • York Aerospace & Rocketry - YAR
Directions Website Contact the business

York Aerospace & Rocketry - YAR Y.A.R. is a student organisation developing high-power rockets and autonomous robotics at the University of York.

Just a reminder about our avionics workshop in 1 hour! We will be in a computer room, but I recommend you bring a charge...
22/11/2023

Just a reminder about our avionics workshop in 1 hour! We will be in a computer room, but I recommend you bring a charged laptop so you can look further into the software afterwards. There is NO PRIOR EXPERIENCE required ( :

We expect it to take 2 hours, with some overflow discussion time as usual. In the case it takes longer, we will reserve a second session two weeks from now so please ask questions and don't feel the need to rush!

Finally, with next week being a manufacturing week, I'd like to ask everyone to provide feedback, regardless of how short your experience here. It's invaluable to us to help make these more accessible and aligned with what people want and expect.

So please, message me or discuss here, and I hope to see many of you soon!

Ever wanted to build your own rocket? Workshop 1 of our series of workshops helping you build your own rocket starts soo...
03/10/2023

Ever wanted to build your own rocket?

Workshop 1 of our series of workshops helping you build your own rocket starts soon!

This workshop will focus on the OpenRocket Software which will be very helpful in the rocket design process! It will also be a great opportunity to meet the Society and the committee.

Come along!

Date: Wed 04/10/23
Location: SLB/105
Time: 5:30 - 7

Meet Manufacturing at YAR!Fancy getting involved and maybe learn a new skill?Get in touch and check out our Linktree bel...
25/09/2023

Meet Manufacturing at YAR!

Fancy getting involved and maybe learn a new skill?

Get in touch and check out our Linktree below:

https://linktr.ee/yorkaerospace

07/11/2022

Here is our first ever flight footage from the camera on board Skadi - with audio and all! The video does get a bit rocky after the parachute deployment, and we've also learnt to cut out a more rectangular peephole for the camera next time round! Note: that continuous beeping is the altimeter avionics.

07/11/2022

We were only able to launch Skadi once at EARS on Sunday, as her nose cone split upon landing... Nevertheless, here is the launch footage!

We launched a couple of model rockets as well, before the event was wrapped up early due to bad weather

07/11/2022

We were only able to launch Skadi once at EARS on Sunday, as her nose cone split upon landing... Nevertheless, here is the launch footage!

We launched a couple of model rockets as well, before the event was wrapped up early due to bad weather.

07/11/2022

Introducing SKADI - our most recent rocket built in time for the November EARS launch!

To start making our rocket design a reality in time for November, we will be at the Engineering department (the Church L...
17/10/2022

To start making our rocket design a reality in time for November, we will be at the Engineering department (the Church Lane Building) this Wednesday (the 19th) at 1pm for a few hours. This week we’ll be starting with the fins!

If you have any kind of PPE which you can bring, please do (lab coats, boots, eye protection etc), but don't worry if not, as we can provide some.

Note: timings for Manufacturing Sessions this term may vary week to week.

Address


Website

Alerts

Be the first to know and let us send you an email when York Aerospace & Rocketry - YAR posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to York Aerospace & Rocketry - YAR:

Shortcuts

  • Want your business to be the top-listed business?

Share