Alat ukur listrik digital

13/11/2024

📌 Following are the Different Types of Tires used in Cars:

1. Summer Tire: Summer tires are designed for use in warmer weather, and are not suitable for winter driving conditions

2. Winter Tire: Winter tires are designed to provide traction and grip in winter conditions, such as snow, ice, and cold temperatures.

3. All-Season Tire: All-season tires mean drivers can use the same set of tires all year round, with no seasonal changes required.

4. All-Terrain Tire: All-terrain tires, or A/T tires, are designed for use on and off-road, in various weather conditions, and on different types of terrain.

5. Track Tire: Track tires are a type of tire designed for use on tracks, either for bicycles or racing cars.

6. Trail Tire: Trail tires are designed for vehicles that need traction in mild off-road environments, such as SUVs, crossovers, and small pickups.

7. Ribbed Tire: Ribbed tires, also known as rib pattern tires, have a tread pattern with raised sections called ribs that run in parallel to the direction of travel.

8. Sport Tire: Sport tires are specialized tires designed for high-performance vehicles and drivers who want to get the most out of their car.

9. Performance Tire: Performance tires, also known as sport tires, are designed to improve a vehicle's handling, stability, and grip, especially at higher speeds and during complex maneuvers.

゚

13/11/2024

📌 Guide to Piston & Ring Clearance for Optimum Performance:

Piston ring clearances mainly consist of three types: side clearance, end clearance, and back clearance. Side clearance, also known as side gap, refers to the gap between the side of the piston ring and the groove in the piston when the piston ring is installed, with a standard range of 0.04-1.10mm.

End clearance, also called end gap, is the gap between the ends of the piston ring when the piston is at the top dead center inside the cylinder, with a standard range of 0.25-0.50mm.

Back clearance refers to the gap between the inner cylindrical surface of the piston ring and the bottom of the piston ring groove, with a standard range of 0.50 mm-1.00 mm.

Methods for Measuring the Three Clearances of Piston Rings:

1：Side clearance: Remove the piston ring from the piston, then press its side into the piston ring groove and secure it with one hand, while using a feeler gauge to measure the gap between the piston ring and the groove with the other hand.

2：End clearance: Place the piston ring flat on the piston, then push the piston towards the top dead center of the engine, and use a thickness gauge to measure the gap at the opening of the piston ring.

3：Back clearance: Insert the tail of a vernier caliper into the piston ring groove, measure the depth of the groove, then measure the cross-sectional value of the piston ring with the vernier caliper, and subtract the groove depth from the cross-sectional value of the piston ring.

゚

09/11/2024

Detector/Sensor
sense the parameter being
Monitored (the process variable or controlled variable) and converts the magnitude of that parameter to a mechanical or electrical signal (the measured variable).

Type of sensors.

09/11/2024

Semoga dibukakan seribu pintu yang lain jika satu pintu tertutup. Amin.

09/11/2024

Kalau naik siapa yang Rugi/Untung.

Lebih baik naik pakai kepala, hati,
Biar sama sama menguntungkan.

Naik tempo lalu, menurut berita Penyedia Listrik masih Rugi, dan pengguna mau gak mau ada yg mengeluh rugi.
Kan belum ada yang Untung?

Menurut anda bagaimana...

09/11/2024

Bagian bagian dari mesin sepeda motor.

09/11/2024

Apa yang anda lakukan untuk anda.q

23/10/2024

Selamat jalan ...
Selamat menempuh hidup baru 👍

Pamit ya semuanya, ibu sama bapak pulang dulu ke solo tugas bapak sudah selesai, 😊🤭

31/12/2023

Well production

30/12/2023

Good